Labshake search
Citations for Microchem :
1 - 24 of 24 citations for 6 Chloro 3 methylimidazo 1 2 b pyridazine since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2020Quote: ... and 2 µm S1818 (Microchem, 5000 rpm, baking at 100°C for 1 min). Patterns were developed for 40 – 50 s in MF319 (Microchem) ...
-
bioRxiv - Biochemistry 2021Quote: ... Undeveloped photoresist is washed off with SU-8 developer (1-methoxy-2-propanol acetate, MicroChem).
-
bioRxiv - Neuroscience 2021Quote: ... (3) Spin-coating SU-8 precursor (SU-8 2000.5, MicroChem) at 3000 rpm ...
-
bioRxiv - Genetics 2021Quote: ... we spin-coated SU8-2 (MicroChem) on the wafer with the target height of 1.2 µm ...
-
bioRxiv - Bioengineering 2023Quote: ... (2) LOR 3A and S1805 (Microchem) were spin-coated at 4,000 rpm for 45 s and baked at 180 °C for 4 min and at 115 °C for 1 min ...
-
bioRxiv - Bioengineering 2023Quote: ... (2) LOR 3A and S1805 (Microchem) were spin-coated at 4,000 rpm for 45 s and baked at 180 °C for 4 min and at 115 °C for 1 min ...
-
bioRxiv - Bioengineering 2021Quote: ... a 2-μm-thick SU8 encapsulation layer (SU8-2002, Microchem) was spin-coated onto the sample ...
-
bioRxiv - Bioengineering 2023Quote: Molds for layer #3 and layer #5 (Figure S1d) are fabricated using SU-8 2075 (MicroChem, Newton, MA, USA) spin-coated at 2150rpm for 30s to create ∼100μm tall patterns (Figure S2a ...
-
bioRxiv - Bioengineering 2020Quote: ... Negative master molds were fabricated on 3-in diameter silicon wafers (University Wafer ID: 447) using UV crosslinked Nano SU-8-100 photoresist (Microchem) patterned with photomasks printed on high-resolution transparent plastic film (CAD/Art Inc.) ...
-
bioRxiv - Bioengineering 2023Quote: ... and O2 plasma treated (Harrick Plasma) for 2 min prior to coating with SU-8 photoresist (MicroChem, Kayaku) using a spin-coater ...
-
bioRxiv - Bioengineering 2023Quote: ... with 500×500 µm2 surface area is detached from the Si host substrate using a polydimethylsiloxane (PDMS, Sylgard 184, DOW Chemical) stamp covered with a 2 µm-thin polymethyl methacrylate (PMMA, MicroChem) layer (Fig.S5A ...
-
bioRxiv - Bioengineering 2021Quote: ... by UV (365nm with 11.1mW/cm2) exposure (UV-KUB 2, KLOE, France) of a 75 μm thick layer of SU-8 2075 photoresist (MicroChem Corporation, USA) for 20s ...
-
bioRxiv - Neuroscience 2021Quote: ... and 1 min at 65 °C) before developing the wafer in SU8 developer (MicroChem, USA). The wafer was finally rinsed with isopropanol ...
-
bioRxiv - Neuroscience 2022Quote: ... cleaned wafers were spin-coated with 1 ml/inch SU8-50 (MicroChem, Newton Massachusetts, USA) to obtain a 30-micron height (500 RPM (100 RPM/s acceleration for 15 seconds) ...
-
bioRxiv - Neuroscience 2021Quote: ... and 1 min at 65 °C) before developing the wafer in SU8 developer (MicroChem, USA). The wafer was finally rinsed with isopropanol ...
-
bioRxiv - Bioengineering 2020Quote: ... on top of which a trace layer was shaped using S-1818 (MicroChem, 115 °C, 1 min). Prior to sputtering deposition ...
-
bioRxiv - Bioengineering 2020Quote: ... post-baked (65 °C and 95 °C for 1 min and 4 min, respectively) and developed in SU-8 developer (MicroChem). The SU-8 was hard-baked at 180 °C for 1 hour after development ...
-
bioRxiv - Bioengineering 2022Quote: The procedures to fabricate the NOMA microchip are as follows: 1) Fabrication of the hard molds for microwells by patterning SU8-3035 (Microchem) on silicon wafers with photolithography ...
-
bioRxiv - Bioengineering 2019Quote: ... at a ratio of 10:1 base to curing agent was cast against a mold composed of SU-8 2150 (MicroChem) patterns formed on a silicon wafer ...
-
bioRxiv - Bioengineering 2023Quote: ... PDMS mixture (10:1 elastomer base to curing agent, w/w) was degassed and poured onto SU-8 (MicroChem, MA, USA) patterned wafer and cured at 80°C for 1 h ...
-
bioRxiv - Microbiology 2022Quote: ... at a base to curing agent ratio of 10:1 was cast against a mold composed of SU-8 2150 (MicroChem, Cat# SU-8 2150) patterns formed on a silicon wafer ...
-
bioRxiv - Microbiology 2022Quote: ... at a base to curing agent ratio of 10:1 was cast against a mold composed of SU-8 2150 (MicroChem, Cat# SU-8 2150) patterns formed on a silicon wafer ...
-
bioRxiv - Microbiology 2023Quote: ... at a base-to-curing agent ratio of 10:1 was cast against a mold composed of SU-8 2150 (MicroChem, Cat# SU-8 2150) patterns formed on a silicon wafer ...
-
bioRxiv - Microbiology 2023Quote: ... at a base to curing agent ratio of 10:1 was cast against a mold composed of SU-8 2150 (MicroChem, Cat# SU-8 2150) patterns formed on a silicon wafer ...