Labshake search
Citations for IDEX :
1 - 24 of 24 citations for 6 METHYL 2 PYRIDIN 3 YLQUINOLINE 4 CARBOXYLIC ACID since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2020Quote: ... an MX Series II 2 Position/6 Port UltraLife Switching Valve (IDEX Health & Science, Oak Harbor, WA, USA) was used (see Figure S3) ...
-
bioRxiv - Biophysics 2022Quote: ... Peptides were desalted for 4 minutes on a trap column (1 mM ID x 2 cm, IDEX C-128) manually packed with POROS R2 reversed-phase resin (Thermo Scientific 1112906) ...
-
bioRxiv - Biophysics 2022Quote: ... Injection was accomplished using an MX Series II 2-position/6-port Ultralife™ switching valve with maximum pressure rating 103 MPa (IDEX Health & Science, LLC, Oak Harbor, WA). The valve was configured as a standard chromatography system with a 100 µl sample loop that could be loaded at room pressure using a syringe then switched inline without interrupting column flow ...
-
bioRxiv - Neuroscience 2023Quote: ... 12-port valves (IDEX, EZ1213-820-4) and a peristaltic pump (Gilson ...
-
bioRxiv - Biophysics 2023Quote: ... and hand-packing into a column (2 mm ID × 2 cm, IDEX C-130B). After digestion ...
-
bioRxiv - Bioengineering 2019Quote: ... Adaptors to the flow system (NanoPort Std 6-32 Coned 1/32, IDEX, USA) were fixed to in- and outlets ...
-
bioRxiv - Biochemistry 2022Quote: ... and packed by hand into a column (2 mm ID × 2 cm, IDEX C-130B). Following digestion ...
-
bioRxiv - Cell Biology 2021Quote: ... connected to a 6-port valve (Part # V-451, IDEX Health and Science, Oak Harbor, WA) to produce up to six separate solutions ...
-
bioRxiv - Molecular Biology 2023Quote: ... comprising two multichannel fluidics valves (EZ1213-820-4; IDEX Health & Science) and a Hamilton syringe pump (63133-01 ...
-
bioRxiv - Biophysics 2021Quote: ... or a combination of pepsin and fungal protease type XIII (manually conjugated to POROS™ 20 AL Aldehyde Activated Resin, Thermo Fisher Scientific, and packed in a 2 mm ID x 2 cm IDEX C-130B column ...
-
bioRxiv - Bioengineering 2022Quote: ... 3 mL syringes (Becton Dickinson) were connected to the bead and sample inlet reservoirs via PEEK tubing (IDEX) and a coupler molded out of PDMS ...
-
bioRxiv - Systems Biology 2021Quote: ... and hybridization buffers were moved through a multichannel fluidic valve (IDEX Health & Science EZ1213-820-4) to the custom-made flow cell using a syringe pump (Hamilton Company 63133-01) ...
-
bioRxiv - Bioengineering 2019Quote: ... 1.5 mm OD) to >4 cm PEEK tubing (0.25 mm ID, 0.8 mm OD; IDEX Corporation, Lake Forest, IL). Solenoid valves were energized to de-pressurize the tubing and the tubing was primed by injecting water using a syringe connected to the end of the PEEK tubing ...
-
bioRxiv - Genomics 2023Quote: ... The hybridization buffer and other buffers were moved through a multichannel fluidic valve (IDEX Health & Science EZ1213-820-4) to the custom-made flow cell with a syringe pump (Hamilton Company 63133-01) ...
-
bioRxiv - Biophysics 2021Quote: ... and packed by hand into a column (2mm ID x 2 cm, IDEX C-130B). Following digestion ...
-
bioRxiv - Neuroscience 2021Quote: ... and buffer exchange within the chamber was directed using a custom-built automated fluidics system composed of three 12-port valves (IDEX, EZ1213-820-4) and a peristaltic pump (Gilson ...
-
bioRxiv - Systems Biology 2020Quote: ... The custom-made automated sampler was used to move designated readout probes in hybridization buffer from a 2.0 mL 96-well plate through a multichannel fluidic valve (IDEX Health & Science EZ1213-820-4) to the custom-made flow cell using a syringe pump (Hamilton Company 63133-01) ...
-
bioRxiv - Synthetic Biology 2024Quote: ... The custom-made automated fluid sampler was used to transfer readout probes in hybridization buffer from a 2.0 mL 96 well plate through a fluidic valve (IDEX Health & Science EZ1213-820-4) to the custom-made flow cell using a syringe pump (Hamilton Company 63133-01) ...
-
bioRxiv - Biophysics 2021Quote: ... peptides were desalted for 4 minutes on a hand-packed trap column (Thermo Scientific POROS R2 reversed-phase resin 1112906, 1 mm ID x 2 cm, IDEX C-128). Peptides were then separated with a C8 analytical column (Thermo Scientific BioBasic-8 5 μm particle size 0.5 mm ID x 50 mm 72205-050565 ...
-
bioRxiv - Bioengineering 2022Quote: ... Fluorescence emission was measured through a detection unit consisting of 2 dichroic mirrors (FF-562-Di02, Semrock, IDEX Health & Science, Rochester, NY, USA), emission filters (FF01-514/44 and FF01-624/40 ...
-
bioRxiv - Biophysics 2023Quote: ... peptides were desalted by flowing across a hand-packed trap column (Thermo Scientific POROS R2 reversed-phase resin 1112906, 1 mm ID × 2 cm, IDEX C-128) at 5 °C ...
-
bioRxiv - Biochemistry 2022Quote: ... peptides were desalted for 4 minutes on a hand-packed trap column (Thermo Scientific POROS R2 reversed-phase resin 1112906, 1 mm ID × 2 cm, IDEX C-128). Peptides were then separated with a C8 analytical column (Thermo Scientific BioBasic-8 5-μm particle size 0.5 mm ID × 50 mm 72205-050565 ...
-
bioRxiv - Biophysics 2023Quote: ... and samples were desalted on a hand-packed trap column (Thermo Scientific POROS R2 reversed-phase resin 1112906, 1 mm ID × 2 cm, IDEX C-128) as described ...
-
bioRxiv - Biophysics 2022Quote: ... The column hardware used for the 50°C separation was Modular Systems 4.6 mm ID 30 cm with a 2 µm frit (IDEX Health & Science, LLC, Middleboro, MA).