Labshake search
Citations for Biotek :
1 - 50 of 2109 citations for Creatinine Urinary Detection Kit 10 Plate since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2020Quote: ... Detection was done in a Synergy M1 Plate reader (Biotek). When absolute quantitation is presented ...
-
bioRxiv - Immunology 2021Quote: ... Detection was done in a Synergy M1 Plate reader (Biotek). When absolute quantitation is presented ...
-
bioRxiv - Bioengineering 2022Quote: ... Luminescence detection was performed by an inspired plate reader (Biotek, Montpelier, VT, United States).
-
bioRxiv - Plant Biology 2023Quote: ... and 750nm using a spectrophotometer plate reader (Synergy HT Multi-Detection Microplate Reader; BioTek Instruments). Chlorophyll A was calculated as 13.71*(664nm-750nm)-2.858*(647nm-750nm) ...
-
bioRxiv - Neuroscience 2020Quote: ... β-galactosidase expression was measured using colorimetric detection (Abs420nm, using a Synergy H1 plate reader (Biotek) from samples in a 96-well plate ...
-
bioRxiv - Pharmacology and Toxicology 2020Quote: ... Plates were read at 450 nm using a Synergy™ HT multi-detection microplate reader (Biotek, Winooski, VT).
-
bioRxiv - Bioengineering 2022Quote: ... with a chondroitin sulphate standard read using the Synergy HT multi-detection micro-plate reader (BioTek Instruments, Inc) with a wavelength set to 656 nm ...
-
bioRxiv - Microbiology 2020Quote: ... Plate reader assays were performed under oxygen-limited conditions in 96-well plates (Nunclon Delta Surface, Thermo Scientifc) with Synergy HTX Multi-Detection Microplate Readers (BioTek) at 30°C ...
-
bioRxiv - Cancer Biology 2024Quote: ... Luminescence was measured after 15-min incubation at room temperature with luciferin detection reagent using a plate reader (Synergy H4 Microplate Reader, Biotek). The GSH/GSSG ratio was calculated using the following formula.
-
bioRxiv - Microbiology 2023Quote: ... The growth plate was incubated for 10 h at 30°C and fast-orbital shaking inside a Synergy H1 plate reader (BioTek). After growth ...
-
bioRxiv - Bioengineering 2021Quote: ... and we measured the excitation at 485 nm and the absorption at 528 nm with black 96-well plates with multi-detection microplate reader (BioTek, USA). The DNA probes used in the EMSA were amplified by PCR with CreF1/CreR using the B ...
-
bioRxiv - Plant Biology 2021Quote: ... and 663 nm by calibrating to zero with pure DMSO and was measured with a spectrophotometer plate reader (Synergy HT Multi-Detection Microplate Reader; BioTek Instruments). Measurements were done in 2 biological replicates ...
-
bioRxiv - Microbiology 2023Quote: ... MA) was used for signal detection at 450 nm with a BioTek Synergy H1 plate reader (Biotek Instruments Inc., Winooski, VT). Values were interpolated in GraphPad Prism 9 (GraphPad ...
-
bioRxiv - Synthetic Biology 2021Quote: ... The plate was then incubated for 10 minutes at room temperature and subsequently transferred to a plate reader (BioTek; Synergy H1) with the lid removed ...
-
bioRxiv - Biochemistry 2021Quote: ... The plates were incubated for 10 minutes before recoding absorbance at 415 nm by ELISA plate reader (BioTek, µ-QuantTM, USA). Quercetin standers were used to get standard curve (Supplementary Figure S3) ...
-
bioRxiv - Microbiology 2023Quote: ... and measured luminescence within 10 min using a Synergy H1 plate reader (Biotek). Alternatively ...
-
bioRxiv - Bioengineering 2022Quote: ... metachromatic changes of DMMB in presence of sGAG were determined using the Synergy HT multi-detection micro-plate reader (BioTek Instruments, Inc) at 530 and 590 nm ...
-
bioRxiv - Bioengineering 2022Quote: ... were added and the hydroxyproline content quantified with a trans-4-Hydroxy-L-proline (Fluka analytical) standard using a Synergy HT multi-detection micro-plate reader at a wavelength of 570 nm (BioTek Instruments, Inc).
-
bioRxiv - Bioengineering 2022Quote: ... were added and the hydroxyproline content quantified with a trans-4-Hydroxy-L-proline (Fluka analytical) standard using a Synergy HT multi-detection micro-plate reader at a wavelength of 570 nm (BioTek Instruments, Inc).
-
bioRxiv - Microbiology 2020Quote: ... Promoter activity was then followed by continuous measurement of the growth and GFP fluorescence (one measure every 30 min during 10 h) of the cultures with the Synergy™2 Multi-detection microplate reader (Biotek). Promoter activity was then estimated by dividing the fluorescence value by the OD600 value for each time point.
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... the plate was incubated for 10 minutes before FP measurements with a BioTek Synergy 4 (BioTek) at excitation and emission wavelengths of 485 and 528 nm ...
-
bioRxiv - Microbiology 2022Quote: ... followed by luminescence detection (Synergy H1, BioTek). Data are expressed as Relative Light Units (RLU ...
-
bioRxiv - Microbiology 2024Quote: ... 450 nm) from 10 min to 45 min was obtained by the plate reader (Synergy HTX, BioTek) and used as the NA activity measured by MUNANA assay ...
-
bioRxiv - Neuroscience 2021Quote: ... For each plate plasmids were extracted using the E-Z 96 FastFilter Kit (Omega BioTek) and eluted into a half-area UV transparent 96 well plate (Corning Costar) ...
-
bioRxiv - Microbiology 2022Quote: ... Plates were read in Epoch Plate Reader (BioTek) in the anaerobic chamber with OD600 readings performed every 15 minutes after a 2-minute linear shake.
-
bioRxiv - Neuroscience 2021Quote: ... λem= 490 nm was measured every 10 min for up to 24 h using a fluorescence plate reader (Biotek). Once the optimal concentrations of approximately 20 μM Aβ42 ...
-
bioRxiv - Cell Biology 2023Quote: ... 5 mM d-glucose) twice before a 10 minute incubation in a 37°C plate reader (Synergy H4, BioTek), optionally with DMSO or Dyngo4a (30 μM ...
-
bioRxiv - Immunology 2023Quote: ... Plates were incubated for 10 min at room temperature and luminescence was then acquired on a Cytation 5 (BioTek) with an integration time of 0.2 seconds.
-
bioRxiv - Microbiology 2023Quote: ... recorded using a Synergy2 Multi-Detection Microplate Reader (BioTek) at the indicated time points post-infection.
-
bioRxiv - Biochemistry 2020Quote: ... following which plates were agitated at 25°C for 10 min and absorbance recorded at 590 nm by a multi well plate reader (Biotek–Epoch ...
-
bioRxiv - Immunology 2021Quote: ... Assay plates were placed on an orbital sharker for 2 min and incubated at 25 °C for 10 min before luminescence was read on a Cytation 5 multimodal plate reader (BioTek). The data was exported to spreadsheet software for analyses and visualized with GraphPad PRISM software (v 9.2.0).
-
bioRxiv - Cell Biology 2022Quote: ... and absorbance at a wavelength of 600 nm (OD600) was recorded every 10 minutes over 25 hours at 30℃using a plate reader (Biotek™ Synergy™ H1 ...
-
bioRxiv - Microbiology 2022Quote: ... OD600 was read every 10 minutes for 18 hours with constant shaking at 37°C in an Epoch 2 plate reader (BioTek) in an anaerobic chamber ...
-
bioRxiv - Molecular Biology 2019Quote: ... Reactions were incubated for 1-2 min at room temperature and then absorbance measured at 412 nm for 10 min with 1 min interval using a Powerwave plate spectrophotometer (BioTek). The rate of change in absorbance per minute is linearly proportional to the total concentration of GSH ...
-
bioRxiv - Cell Biology 2022Quote: ... The plate was then cultured for 1 day before washing with assay buffer (1x HBSS, 10 mM HEPES, pH 7.4) in a ELx405 CW plate washer (BioTek Instruments). The cells were then incubated with 1.25 µM calcium indicator Fluo-8 AM (AAT Bioquest ...
-
bioRxiv - Microbiology 2022Quote: ... Plates were incubated at RT for 10 minutes in the dark before luminescence was measured using a Synergy 4 (BioTek) plate reader ...
-
bioRxiv - Microbiology 2022Quote: ... Anaerobic growth was monitored by measuring absorbance (OD600) every 10 min for 24 h at 37 °C using a Cytation 3 plate reader (BioTek).
-
bioRxiv - Cancer Biology 2023Quote: The absorbance at 340 nm was measured every 10 or 12 seconds for 15 min by a Synergy HTX plate reader (BioTek). An NADH standard curve was used to determine the reaction rate ...
-
bioRxiv - Cancer Biology 2023Quote: ... Colonies were solubilized in 10% acetic acid to quantify clonogenic capacity and read for absorbance at 590nm in a plate reader (BioTek).
-
bioRxiv - Microbiology 2023Quote: ... The microtiter plates were incubated at 37°C and OD600 was measured every 10 minutes using Synergy H1 Hybrid Reader (BioTek) or Hidex Sense (Hidex Oy) ...
-
bioRxiv - Microbiology 2023Quote: ... The microtiter plates were incubated at 37°C and OD600 was measured every 10 minutes using Synergy H1 Hybrid Reader (BioTek) or Hidex Sense (Hidex Oy) ...
-
bioRxiv - Biophysics 2023Quote: ... 20 µl of detection reagent was added and after another incubation step of 10 min the luminescence was measured using a micro plate reader (SynergyT MH1, BioTek). BSA was used as a negative control and measurements were performed in triplicates.
-
bioRxiv - Pathology 2023Quote: ... 100 µmol/L) were added and the formation of thrombin monitored over 10 minutes using a fluorescence plate reader (Synergy 2, BioTek Instruments ...
-
bioRxiv - Biochemistry 2024Quote: ... Growth was monitored at 37 °C with orbital shaking and absorbance at 600 nm was measured every 10 minutes in a plate reader (Synergy H1 microplate reader, BioTek).
-
bioRxiv - Microbiology 2024Quote: ... The plate was then incubated at 30°C in a plate reader (BioTek, plate reader, Synergy H1), for up to 48 h ...
-
bioRxiv - Bioengineering 2020Quote: ... Plate luminescence was read immediately using a plate reader (BioTek Synergy HT Plate Reader and Gen5 Software ...
-
bioRxiv - Microbiology 2019Quote: ... Plates were read on a Synergy HT plate reader (Biotek) using 450 nm for sample detection and 540 nm for wavelength correction.
-
bioRxiv - Cancer Biology 2020Quote: ... Plates were then read on a fluorescence plate reader (Biotek) using an excitation wavelength of 485 nm and an emission wavelength of 530 nm ...
-
bioRxiv - Immunology 2021Quote: ... Plates were washed 3x in TBST by plate washer (BioTek), and 50 μL of 1:5 serial dilutions starting at 1:100 of NHP sera in TBST incubated for 1 h in wells with I53-50 or spike ...
-
bioRxiv - Synthetic Biology 2022Quote: ... Before launching plate reader (for 96-well plates: ELx808, BioTek Instruments ...