Labshake search
Citations for Sutter Instruments :
1 - 9 of 9 citations for Borrelia burgdorferi sensu stricto B31 Surface Lipoprotein P27 since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2023Quote: ... The EAr was lowered onto the surface of the exposed brain using a motorized manipulator (MP200; Sutter instruments). The dorsoventral coordinates were marked using the depth of the electrode targeting the PVN (AP= -1 mm ...
-
bioRxiv - Neuroscience 2019Quote: ... Electrodes were inserted perpendicular to the surface of the cortex using a micro-manipulator (MP-225, Sutter Instrument Company). Cortical penetration depth was tracked using micro-manipulator coordinates with the tip of the electrode being inserted between 900 μm to 1450 μm (mean of 1256 μm ± 157 μm ...
-
bioRxiv - Neuroscience 2021Quote: ... A 16-channel silicon probe (NeuroNexus) was lowered into HVC (between 300-700 μm from the dorsal surface) using a micromanipulator (Sutter Instruments). Neural activity was digitized at a sampling rate of 30 kHz on an Intan RHD2132 headstage and acquired with an RHD Recording Controller (Intan Technologies) ...
-
bioRxiv - Neuroscience 2020Quote: ... the oxygen microelectrode was positioned perpendicular to the brain surface and advanced into the cortex with a micromanipulator (MP-285, Sutter Instrument). Measurement site was chosen to avoid large pial vessels ...
-
bioRxiv - Neuroscience 2019Quote: ... the oxygen microelectrode was positioned perpendicular to the brain surface and advanced into the cortex with a micromanipulator (MP-285, Sutter Instrument). The depth zero was defined as when the tip of the oxygen microelectrode touches the brain surface under visual inspection ...
-
bioRxiv - Neuroscience 2023Quote: ... The reference and ground wires were inserted into their respective burr holes and the EAr was lowered onto the surface of the exposed brain using a motorized manipulator (MP200; Sutter Instruments). The dorsoventral coordinates were estimated using the depth of the electrode targeting the PVN (AP = −1 mm ...
-
bioRxiv - Neuroscience 2021Quote: ... The array was advanced slowly to a depth of 200-350 um from the surface into the ACx using a micromanipulator (MP-285, Sutter Instrument Company). The electrodes were allowed to settle for 15-20 min before the stimulus presentation was started ...
-
bioRxiv - Neuroscience 2021Quote: ... L2/3 responses were probed between 200-300 microns from the cortical surface using a micromanipulator (MP-285, Sutter Instrument Company, Novato, CA). Signals were acquired after passing through unity gain (1x ...
-
bioRxiv - Neuroscience 2019Quote: ... The array was advanced slowly to a depth of 1800 um from the surface (Fig. 1A) into the OFC using a micromanipulator (MP-285, Sutter Instrument Company, Novato, CA). The electrodes were allowed to settle for >20 min before the stimulus presentation was started ...