Labshake search
Citations for Polysciences :
1 - 50 of 793 citations for 8 chloro 10 3 dimethylamino propyl phenothiazin 1 ol since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2022Quote: ... worms were mounted on 8–10% agarose pads in 3 μL of a 0.5 μM polystyrene bead slurry (Polysciences, Warrington, PA) in PBS pH 7.4 (Kim et al. ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... and the plasmids for G protein activation (the ratio of receptor/Gα/Gβ/Gγ was 4/1/2/8) using linear polyethyleneimine (PEI, Polysciences, 3:1 PEI:DNA ratio) (65 ...
-
bioRxiv - Microbiology 2021Quote: Prior to flow cytometry analysis 2 μl of fluorescent microspheres (1×10−3 of the stock Fluoresbrite® YG Microspheres 0.75μm, Polysciences) was added and the volume was adjusted to 500 μl by adding FACSFlow solution (10 mM phosphate-buffered saline ...
-
bioRxiv - Developmental Biology 2024Quote: ... 10 μl of BioMag Plus Concanavalin A beads (Polysciences # 86057-3) were washed twice in 500 μL of Binding Buffer (20 mM HEPES-KOH pH 7.9 ...
-
bioRxiv - Cell Biology 2022Quote: ... Bones were then washed for 10 minutes in PBS (3 times) and stained with a 1:1 mixture of 2% aqueous osmium tetroxide (cat# 23310-10, Polysciences, Inc., Warrington, PA, USA) and 5% potassium dichromate for 48 hours ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were transiently transfected at a density of 3 × 10^6 cells/mL using linear polyethylenimine (Polysciences Cat# 23966-1). The media was supplemented 24 hours after transfection with 2.2 mM valproic acid ...
-
bioRxiv - Biochemistry 2021Quote: ... 3 mL PEI (1 mg ml−1, pH 7.4, Polysciences) was added to 50 mL hybridoma media (Invitrogen ...
-
bioRxiv - Biochemistry 2020Quote: ... 3 mL PEI (1 mg ml−1, pH 7.4, Polysciences) was added to 50 mL hybridoma media (Invitrogen ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were transiently transfected at a density of 3 x 10^6 cells/mL using linear polyethylenimine (Polysciences Cat# 23966-1). The media was supplemented 24 hours after transfection with 2.2 mM valproic acid ...
-
bioRxiv - Biochemistry 2021Quote: ... Expi293 cells were transfected at a density of 3 x 10^6 cells/mL using linear polyethylenimine (Polysciences Cat# 23966-1). 24-hours following transfection ...
-
bioRxiv - Biochemistry 2021Quote: ... Expi293 cells were transfected at a density of 3 x 10^6 cells/mL using linear polyethylenimine (Polysciences Cat# 23966-1). 24-hours following transfection ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were transiently transfected at a density of 3 x 10^6 cells/mL using linear polyethylenimine (Polysciences Cat# 23966-1). 24-hours following transfection ...
-
bioRxiv - Microbiology 2020Quote: 8 × 106 HEK 293T cells were transfected with a plasmid encoding PUUV GPC (35 μg in pCAGGS vector) and Tim-1 (3 μg) using PEI (3:1 PEI:DNA, Polysciences, Inc.). After 24 h ...
-
bioRxiv - Molecular Biology 2022Quote: ... and 1:3 25 kDa linear Polyethylenimine (Polysciences, #23966). The cells were grown for 20-28h ...
-
bioRxiv - Biochemistry 2020Quote: ... 1 mg plasmid and 3 mg PEI25k (Polysciences, Inc.) was mixed in 100 ml OptiMEM media (Invitrogen) ...
-
bioRxiv - Cell Biology 2022Quote: ... Embryos were collected and mounted in 8-10 μL of egg buffer supplemented with 18.8μm polystyrene beads (Polysciences, Inc.).
-
bioRxiv - Molecular Biology 2021Quote: ... 500,000 OSCs were bound to 10 µl Concanavalin A-coated magnetic beads (Polysciences, #86057-3) and lysed using Dig-wash buffer (20 mM HEPES pH 7.3 ...
-
bioRxiv - Cell Biology 2022Quote: ... embryos were dissected in 8-10 μL of Shelton’s Growth Medium (Edgar and Goldstein, 2012) and mounted with 20 μm polystyrene beads (Polysciences, Inc.) between a slide and coverslip ...
-
bioRxiv - Cell Biology 2020Quote: ... in a ratio of 3:2:1 using 1 mg/ml polyethylenimine (Cat#23966-1, Polysciences, Inc.). Retrovirus was harvested from the medium 48 h post-transfection ...
-
bioRxiv - Microbiology 2022Quote: ... Cells were incubated at 37°C for 3 days and later fixed with 10% paraformaldehyde (Polysciences) for 24 hours ...
-
bioRxiv - Cell Biology 2023Quote: ... The plasmid was mixed 1:3 (w/w) with PEI 25 K (Polysciences, 23966-1) for 20 min at room temperature and then used to transfect HEK293S GnTi- cells at 37°C in 5% CO2 (ATCC ...
-
bioRxiv - Neuroscience 2021Quote: ... Sections were washed 3 times with PBS for 10 minutes and mounted using AquaPolymount (Polysciences, Warrington, USA). Images were obtained on a Confocal and STED FACILITY line microscope (Abberior Instruments ...
-
bioRxiv - Neuroscience 2020Quote: ... sections were subsequently washed with PBS 1X (3 × 10 min) and mounted in Aqua/polymount (Polysciences 18606).
-
bioRxiv - Immunology 2021Quote: ... The cells were incubated at 37°C for 3 days and then fixed with 10% paraformaldehyde (Polysciences) for 24 hours ...
-
bioRxiv - Neuroscience 2022Quote: Slices were washed 3 times for 10 minutes in PBS and mounted with Aqua-Poly/Mount (Polysciences). Images were taken using a Zeiss LSM780 confocal microscope and images were processed using ImageJ software ...
-
bioRxiv - Cell Biology 2021Quote: ... The entire intestine was dissected out and fixed in 1× PBS plus 8% EM-grade paraformaldehyde (Polysciences) for 1 h ...
-
bioRxiv - Molecular Biology 2023Quote: ... were purchased from Sigma Aldrich while PSS of Mw = 1 000 (PSS_5) and Mw = 8 890 (Mw/Mn = 1.09) (PSS_43) were bought from Polysciences and Scientific Polymer Products Inc. ...
-
Quantitative Comparison of Presenilin Protein Expression Reveals Greater Activity of PS2-γ-SecretasebioRxiv - Cell Biology 2023Quote: ... or PEI Max (3 µg PEI per 1 µg DNA) (Polysciences 24765) (for substrate only transfection for investigating endogenous PS (Fig 5 & 6) ...
-
bioRxiv - Immunology 2023Quote: ... 3 μl of linear PEI (1mg/ml, Cat. No. 23966-1, Polysciences) transfection reagent was used per 1 μg of plasmid DNA ...
-
bioRxiv - Systems Biology 2023Quote: ... along with 10 uL of 1 mg/mL PEI (Polysciences 24765-1) in 200 uL of serum-free DMEM ...
-
bioRxiv - Neuroscience 2020Quote: ... Finally sections were subsequently washed with PBS (3 x 10 min) and mounted in Aqua/polymount (Polysciences, 18606).
-
bioRxiv - Microbiology 2020Quote: ... the cells were fixed in 3% paraformaldehyde and were stained for 1 hour with 1% Uvitex (Polysciences), which specifically binds to the chitin of the fungal cell wall ...
-
bioRxiv - Microbiology 2020Quote: ... and co-transfected with the two IgG plasmids expressing the corresponding HC and LC in a 1:1 ratio at a density of 0.8-1.2 million cells/mL in a 1:3 ratio with 1 mg/L PEImax (Polysciences). The recombinant IgG antibodies were isolated from the cell supernatant after five days as described previously (20 ...
-
bioRxiv - Genetics 2019Quote: ... at a weight ratio of 4:3:2 using 54 µL PEI (Polysciences, 24765-1, 1 µg/µl). We changed the medium after 4-6 hours of incubation at 37 °C and 5% CO2 ...
-
bioRxiv - Molecular Biology 2024Quote: ... Cells were resuspended in wash buffer and 10 µl BioMag®Plus Concanavalin A (ConA) beads (Polysciences, 86057-3) were added for 10 min at RT ...
-
bioRxiv - Microbiology 2021Quote: Pseudoviruses bearing the wild-type or variant HIV-1 Envs were produced by co-transfecting the Env-expressing pSVIIIenv plasmid and the luciferase-encoding pNL4-3.Luc.R-E-vector (NIH HIV Reagent Program) at a 1:1 ratio into HEK293T cells using polyethylenimine (Polysciences). The cell supernatants containing pseudoviruses were harvested 48 hr later ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... at a 2:1:1 ratio in HEK293T cells using 3 μg polyethylenimine (25 kDa linear, Polysciences, Warrington, USA) per μg plasmid DNA ...
-
bioRxiv - Biochemistry 2023Quote: Cells were transfected with plasmid DNA (0.75 µg) using a 1:3 (w/v) ratio of DNA to polyethyleneimine “MAX” MW 40,000 (1 mg/ml, Polysciences). These were first individually diluted in 100 µl of 150 mM NaCl ...
-
bioRxiv - Cell Biology 2019Quote: ... samples were washed 3 times for 30 mins with PBS then incubated through a cryoprotective series of sucrose solutions of increasing concentration from 10-50% for ≥3 hours each before embedding into OCT compound (Tissue Tek) in disposable cryomolds (Polysciences) and frozen in an isopentane bath cooled by liquid nitrogen ...
-
bioRxiv - Immunology 2024Quote: ... Cells were incubated at 37°C in a 5% CO2 incubator for 3 days and fixed with 10% paraformaldehyde (Polysciences) for 24 hours ...
-
bioRxiv - Genetics 2023Quote: ... or recombined forms of eG-SCON-FRT-FP was mixed with 8 μl of polyethyleneimine (1 mg/ml; Polysciences, 23966). These solutions were then incubated at room temperature for at least 15 minutes before being added dropwise to the cells ...
-
bioRxiv - Immunology 2022Quote: ... and co-transfected with a 1:3 ratio of the two HC/LC DNA plasmids and 1 mg/l PEImax (Polysciences). Five days post-transfection ...
-
bioRxiv - Immunology 2023Quote: ... Co- transfection of those plasmids were performed at a density of 4-5 million cells/mL in a 1:3 ratio (weight: weight) of plasmids to PEImax at 1 mg/ml (Polysciences). Following a 4-day incubation ...
-
bioRxiv - Neuroscience 2024Quote: ... in DMEM complete medium as described previously17 with the following modifications: a 3:1 ratio of 1 µg/µl polyethenylamine (PEI) (Linear, MW 25,000, Polysciences, 23966) to transfer DNA was used in place of TransIT Lenti Transfection Reagent ...
-
bioRxiv - Molecular Biology 2021Quote: ... OSCs were harvested and 500.000 OSCs were washed three times and coupled to 10 µl of activated Concanavalin A-coated magnetic beads (Polysciences, #86057-3) per sample ...
-
bioRxiv - Biochemistry 2020Quote: ... using 1 μg of plasmid DNA and 3 μg of linear polyethyleneimine (PEI; Polysciences, Germany). Cells were harvested 6 days after transfection by centrifuging the medium for 15 minutes at 1000 x g ...
-
bioRxiv - Cell Biology 2021Quote: ... The cells were transfected with 1: 3 ratio of desired DNA and polyethylenimine (PEI) (Polysciences) complex and incubated the cells for 35-36 hours at 37°C before preparation of slides for confocal microscopy ...
-
bioRxiv - Molecular Biology 2023Quote: ... and transient transfection was achieved by using a 3:1 ratio of PEI (Polysciences, Inc.) to DNA in Opti-MEM (Invitrogen).
-
bioRxiv - Genetics 2021Quote: ... -eG-DECAI-FP or recombined forms of eG-SCON-FP or eG-DECAI-FP) was mixed with 8 μl of polyethyleneimine (1 mg/ ml; Polysciences, 23966) and incubated at room temperature for at least 15 minutes before being added dropwise to the cells ...
-
bioRxiv - Microbiology 2020Quote: ... ANDV GPC or HTNV GPC (100 μg, in pCAGGS vector) and Tim-1 (6 μg) using PEI (3:1 PEI: DNA, Polysciences, Inc.). After 24 h ...