Labshake search
Citations for Polysciences :
1 - 50 of 696 citations for 6 CHLORO 1 METHYL 5 INDOLECARBOXYLIC ACID since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cancer Biology 2023Quote: Poly(methyl methacrylate-co-methacrylic acid) (PMMA-MA; 10% methacrylic acid, MW ∼100,000 Da, 17913-500) was from Polysciences (Germany), organic solvents were obtained from Carl Roth (Austria) ...
-
bioRxiv - Microbiology 2023Quote: ... for 5 min and differentiated in 1% acetic acid (Polysciences, 25088f) for 1 min before dehydration and mounting with permount (Fisher ...
-
bioRxiv - Cell Biology 2023Quote: ... 1% Acetic Acid (Polysciences) was pipetted directly onto the sections for one minute ...
-
bioRxiv - Neuroscience 2019Quote: ... We then sterilized 1- and 6-µm diameter polystyrene microbeads (Polysciences, Cat#: 07310-15 and 07312-5) as noted in Cone et al. ...
-
bioRxiv - Developmental Biology 2021Quote: ... 3 µm diameter or Dynabeads T1: 1 µm diameter) at concentrations of 5×106/µl (high) or 5×105/µl (low) or polystyrene beads (Polysciences, 64090-15: 6 µm diameter) at concentrations of 1×105/µl (high ...
-
bioRxiv - Neuroscience 2021Quote: ... nadic methyl anhydride (NMA, Polysciences Inc., cat# 00886–500), and 2,4,6-Tris-(dimethylaminomethyl)phenol (DMP- 30 ...
-
bioRxiv - Microbiology 2023Quote: ... for 1 min and Phosphotungstic acid (Polysciences, 25088D) for 10 mins with washes between each step ...
-
bioRxiv - Neuroscience 2019Quote: ... we injected 6 µm (2 µL at 3×106 beads/µL; Polysciences, Cat#: 07312-5) and 1 µm (2 µL at 1.5×107 beads/µL ...
-
bioRxiv - Cell Biology 2020Quote: ... Samples were further stained with 1% tannic acid and 1% uranyl acetate (Polysciences Inc. ...
-
bioRxiv - Cell Biology 2020Quote: ... 5*10^6 293FT cells were transfected in 10 cm dishes using 4 μg polyethylenimine (PEI, Polysciences) per μg plasmid DNA with lentiCRISPR_V2 (Addgene 52961) ...
-
bioRxiv - Cancer Biology 2021Quote: ... 5 μL PEI (Polysciences, #23966-1) in 50 μL Opti-MEM (Thermo Fisher Scientific ...
-
bioRxiv - Biochemistry 2024Quote: ... in a 6:4:1 ratio using PEI-max (Polysciences #24765-100). Virus-containing medium was harvested two days post-transfection ...
-
bioRxiv - Molecular Biology 2023Quote: ... with modified pCW57.1 target vector in a ratio of 5:1:5:5 into HEK293 cells using polyethyleneimine (PEI, Polysciences, 23966) as transfection reagent ...
-
bioRxiv - Bioengineering 2019Quote: Poly(lactic acid-co-glycolic acid) 50/50 (PLGA) (26269, Polysciences Inc) was dissolved in neat chloroform (Merck ...
-
bioRxiv - Cell Biology 2023Quote: ... Phosphotungstic/Phosphomolybdic acid (Polysciences) was added directly to the tissue sections ...
-
bioRxiv - Neuroscience 2021Quote: ... The surface of the substrate was plasma treated at 500 W for 5 min and coated with an aqueous solution of 10% (wt/vol) Poly(acrylic acid) (MW 50000, Polysciences, USA) at 2000 rpm for 15 s using a spin-coater (WS-650-23 ...
-
bioRxiv - Developmental Biology 2019Quote: Fluorescent red beads of 1 uM diameter (1:500, 18660-5, Polysciences) were injected into the KV of embryos at the 6-somite stage ...
-
bioRxiv - Cancer Biology 2021Quote: ... using 5 μL of Polyethylenimine (PEI) (Polysciences, 23966-1) at 1 mg/mL stock concentration ...
-
bioRxiv - Microbiology 2023Quote: ... 1 million HEK293T cells were seeded into 6-well plates and transfected using polyethylenimine (PEI) (#23966-1; Polysciences, Inc.) with 1 μg of the indicated DNA constructs at a 1:5 ratio with PEI ...
-
bioRxiv - Physiology 2020Quote: ... were transiently co-transfected with either A1R-Nluc or A3R-Nluc and β-arrestin2-YFP (total 2 μg, at a 1:6 ratio) using polyethyleneimine (PEI, 1 mg/ml, MW = 25,000 g/mol) (Polysciences Inc) at a DNA:PEI ratio of 1:6 (w/v) ...
-
bioRxiv - Biochemistry 2020Quote: ... Contrasting for TEM was done by embedding the grids in 1.8% methyl cellulose and 0.4% uranyl acetate (Polysciences, Inc. ...
-
bioRxiv - Microbiology 2020Quote: ... ANDV GPC or HTNV GPC (100 μg, in pCAGGS vector) and Tim-1 (6 μg) using PEI (3:1 PEI: DNA, Polysciences, Inc.). After 24 h ...
-
bioRxiv - Bioengineering 2020Quote: ... After washing with acetic acid (1%, Fluka) samples were incubated with safranin O (0.1%, 15 min, Polysciences) to stain proteoglycans in red ...
-
bioRxiv - Microbiology 2022Quote: ... 6 μm polystyrene microspheres (Polysciences, USA) were used to calibrate the flow cytometer and evaluate cell size ...
-
bioRxiv - Immunology 2023Quote: ... or 6 μm (#17145-4; Polysciences) amine-conjugated beads were washed in anhydrous DMSO (#276855 ...
-
bioRxiv - Immunology 2023Quote: ... and PEI (Polysciences, 9002-98-6), and transfected into HEK293T cells at 80% to 90% confluence in 10-cm tissue culture plates ...
-
bioRxiv - Pathology 2022Quote: ... Slides were placed in phosphomolybdic acid (Polysciences) for two minutes ...
-
bioRxiv - Bioengineering 2019Quote: ... Poly(glycolic acid) (PGA) (06525, Polysciences Inc) was dissolved in neat HFIP at a concentration of 1% (w/v ...
-
bioRxiv - Cell Biology 2023Quote: ... the samples were properly oriented and embedded in Poly/Bed® 812 (Dodecenyl Succinic Anhydride, Nadic Methyl Anhydride, Poly/Bed 812 Resin and Dimethylaminomethyl, Polysciences). Thin (300 nm ...
-
bioRxiv - Immunology 2023Quote: Polybead amino 6 µm-diameter microspheres (Polysciences) were prepared to covalently couple rCD6 or rICAM1 ...
-
bioRxiv - Neuroscience 2020Quote: ... we used FastBlue (5% in distilled water, 17740-1, Polysciences, Inc, Warrington, PA), fluorescent latex microspheres (red retrobeads IX or green retrobeads IX ...
-
bioRxiv - Microbiology 2022Quote: ... PVSA (poly(vinylsulfonic acid) was acquired from Polysciences. The following reagents were acquired from Fisher Scientific ...
-
bioRxiv - Microbiology 2023Quote: ... followed by Biebrich Scarlet-Acid Fuchsin (Polysciences, 25088C) for 1 min and Phosphotungstic acid (Polysciences ...
-
bioRxiv - Cell Biology 2020Quote: ... washed with PBS and stained twice with a 4% hydochloric acid and 4% potassium ferrocyanide (1:1 v/v) solution of for 25 minutes (Polysciences Prussian Blue stain kit, PA USA). After washing with PBS ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were transiently transfected at a density of 3 × 10^6 cells/mL using linear polyethylenimine (Polysciences Cat# 23966-1). The media was supplemented 24 hours after transfection with 2.2 mM valproic acid ...
-
bioRxiv - Cell Biology 2021Quote: ... 200 μL of 6% paraformaldehyde (Polysciences 18814-10) in PBS was added to each well and incubated for 10 min ...
-
bioRxiv - Neuroscience 2022Quote: ... 1 μg DNA/ml transfection volume and 5 μg of 40 kDa PEI (Polysciences) were first diluted separately in 5% transfection volume in supplemented F17 media ...
-
bioRxiv - Cell Biology 2023Quote: ... were diluted 1:5 in 10% polyvinyl alcohol (Mowiol 4-88, 17951, Polysciences Inc.) in Milli-Q water and spun-coat onto plasma-cleaned coverslips (#1.5H ...
-
bioRxiv - Cell Biology 2024Quote: ... were diluted 1:5 in 10% polyvinyl alcohol (Mowiol 4-88, 17951, Polysciences Inc.) in MilliQ water and spun-coat onto plasma-cleaned coverslips (#1.5H ...
-
bioRxiv - Microbiology 2020Quote: ... Infections were performed by spinoculation for 2 hours at 1400 x g with VSVg pseudotyped HIV-1 at MOI of 5 in the presence of 1 μg/ml PEI (Polysciences) and 16 μg/ml Polybrene (Sigma-Aldrich).
-
bioRxiv - Synthetic Biology 2022Quote: ... were transfected with pHelper, pRepCap and pTransgene (2:1:1 ratio, 2 μg DNA per million cells) using Transport 5 transfection reagent (Polysciences) with a 2:1 PEI:DNA ratio ...
-
bioRxiv - Immunology 2023Quote: ... Co- transfection of those plasmids were performed at a density of 4-5 million cells/mL in a 1:3 ratio (weight: weight) of plasmids to PEImax at 1 mg/ml (Polysciences). Following a 4-day incubation ...
-
bioRxiv - Synthetic Biology 2022Quote: ... Transporter 5™ reagent (Polysciences, Inc, Cat #26008-5) was used to transfect parental HEK293T/17 cells ...
-
bioRxiv - Molecular Biology 2021Quote: ... Plasmid transfections were performed with 1 μg of DNA per single well of a 6-well plate using PEI MAX (Polysciences, INC.) according to the manufacturer’s instructions ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were transiently transfected at a density of 3 x 10^6 cells/mL using linear polyethylenimine (Polysciences Cat# 23966-1). The media was supplemented 24 hours after transfection with 2.2 mM valproic acid ...
-
bioRxiv - Biochemistry 2021Quote: ... Expi293 cells were transfected at a density of 3 x 10^6 cells/mL using linear polyethylenimine (Polysciences Cat# 23966-1). 24-hours following transfection ...
-
bioRxiv - Biochemistry 2021Quote: ... Expi293 cells were transfected at a density of 3 x 10^6 cells/mL using linear polyethylenimine (Polysciences Cat# 23966-1). 24-hours following transfection ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were transiently transfected at a density of 3 x 10^6 cells/mL using linear polyethylenimine (Polysciences Cat# 23966-1). 24-hours following transfection ...
-
bioRxiv - Bioengineering 2022Quote: ... and gRNA expression plasmid (6 μg) were co-transfected with transfection reagent at a 2.6/1 ratio of Polyethylenimine (PEI; Polysciences, Warrington, USA) (μg)/total DNA (μg) ...
-
Physiological activation of the nephron central command drives endogenous kidney tissue regenerationbioRxiv - Physiology 2021Quote: ... histological analysis of periodic acid-Schiff stain was performed on mouse kidney sections using PAS Stain Kit (24200-1, Polysciences, Warrington, PA). Images were visualized at 25× magnification using Leica TCS SP8 (Leica Microsystems ...