Labshake search
Citations for Molecular Devices :
3001 - 3050 of 10000+ citations since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2023Quote: ... along with one channel EMG(band filtered 10-400Hz) were collected by using two multiClamp 700B amplifiers (total 4 channels and all in current-clamp mode) (Molecular devices Inc., Union City, CA) and Clampex 10 software (Molecular Devices Inc. ...
-
bioRxiv - Neuroscience 2023Quote: Signals were amplified using a Multiclamp 700B patch-clamp amplifier (Molecular Devices, USA), sampled at 20 or 50 kHz and filtered at 4 kHz for voltage-clamp and 10 KHz in current-clamp mode ...
-
bioRxiv - Neuroscience 2023Quote: ... digitized with a Digidata 1440 and acquired using pClamp 10.7 software (Molecular Devices, USA). Raw data were sampled at 50 KHz and filtered at 10 KHz ...
-
bioRxiv - Neuroscience 2023Quote: ... TEVC recordings were performed using an Oocyte Clamp amplifier OC-725 (Warner Instruments) and computer-controlled via a 1440A Digidata (Molecular Devices). Currents were sampled at 100 Hz and low-pass filtered at 20 Hz using an 8-pole Bessel filter (900 Series ...
-
bioRxiv - Neuroscience 2023Quote: ... a 1550B digidata and Clampex 10.6 (Molecular Devices). Agonists (100 μM glutamate and 100 μM glycine ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch-clamp (whole-cell) recordings were made using a Multiclamp 700A (Molecular Devices, Sannyvale, CA) with a basic intracellular solution containing (in mM) ...
-
bioRxiv - Neuroscience 2023Quote: ... Photometric measurements were conducted at 450 nm using a microplate reader (Molecular Devices, Versa Max ELISA microplate reader ...
-
bioRxiv - Neuroscience 2023Quote: ... Recordings were made using a Multiclamp 700B amplifier (Molecular Devices, USA) with PClamp 10 software (Molecular Devices ...
-
bioRxiv - Neuroscience 2023Quote: ... the signals were filtered at 300-10,000 Hz and digitized at 20 kHz (Digidata 1550 Series, Molecular Devices, USA).
-
bioRxiv - Microbiology 2023Quote: ... Absorbance was measured at 480 nm using a microplate spectrometer (SpectraMax ABS Plus, Molecular Devices, San Jose, USA).
-
bioRxiv - Neuroscience 2023Quote: ... A 0.5 M carbonate buffer pH 10.7 was used to stop the reaction and assay plates were read at 365 nm excitation and 450 nm emission in SpectraMaxTM i3X (Molecular Devices, CA). This method was qualified over the range of 0.1 to 81 nmol/mL ...
-
bioRxiv - Developmental Biology 2023Quote: ... The luciferase activity was measured using a SpectraMax iD3 Multi-Mode Microplate Reader (Molecular Devices). Subsequently ...
-
bioRxiv - Immunology 2023Quote: ... The cells were then observed using an ImageXpress Micro Cellular Imaging and Analysis System (Molecular Devices) for one hour ...
-
bioRxiv - Biophysics 2023Quote: ... acquired at 2kHz using pCLAMP10 software (Molecular Devices, Axon 200B and Digidata 1550A ...
-
bioRxiv - Cell Biology 2023Quote: ... were processed using 4D viewer module in Metamorph 7.0 (Molecular Devices, USA) (Previously reported in 68,69) ...
-
bioRxiv - Neuroscience 2023Quote: ... Recording was made by using the Multiclamp 700A amplifier (Molecular Devices) connected to a digitizer (Digidata 1550B ...
-
bioRxiv - Biochemistry 2023Quote: ... and the absorbance at 405 nm was monitored with SpectraMax M2e Microplate Readers (Molecular Devices) at 30 sec intervals at ambient temperature for 30 min.
-
bioRxiv - Cell Biology 2023Quote: ... The effluent solutions collected from the top and bottom channels were used for fluorescence measurements using a plate reader (Flexstation 3, Molecular Devices, USA). Subsequently ...
-
bioRxiv - Cell Biology 2023Quote: ... according to the manufacturer’s instructions and read with a SpectraMax M5 plate reader (Molecular Devices, Sunnyvale, CA, USA). Remaining levels of exogenous chemokine are reported as the percentage of levels in supernatants of the corresponding non-receptor expressing cells.
-
bioRxiv - Cell Biology 2023Quote: ... and MetaMorph software (Molecular Devices). Flat interphase cells were identified and the initial focal plane was set by focusing on the far-red SiR tubulin signal with a particular emphasis on finding cells in which individual microtubules could be seen between the nucleus and the glass-adhered plasma membrane ...
-
Bni5 tethers myosin-II to septins to enhance retrograde actin flow and the robustness of cytokinesisbioRxiv - Cell Biology 2023Quote: ... 7.8.10.0 (Molecular Devices) was used for hardware control and image acquisition ...
-
bioRxiv - Cell Biology 2023Quote: ... Currents were recorded in cell-attached mode using an Axopatch 200A/B patch-clamp amplifier (Molecular Devices, Sunnyvale, CA), and digitized using a Digidata 1200B data acquisition system and pClamp 10 software (Axon Instruments ...
-
bioRxiv - Genetics 2023Quote: ... Hamamatsu Flash 4.0 camera and advanced acquisition software package MetaMorph 4.2 (Molecular Devices, LLC, San Jose, CA) with an automated stitching function ...
-
bioRxiv - Cell Biology 2023Quote: ... This configuration was driven by MetaMorph® (Microscopy Automation and Image Analysis Software from Molecular Devices). Images were analysed using a home-made script running on ImageJ (Kocanova et al. ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... on a SpectraMax iD3 (Molecular Devices). Aliquots of 200 µg protein were reduced in 10 mM dithiothreitol at 56°C for 30 min ...
-
Linear ubiquitination at damaged lysosomes induces local NF-κB activation and controls cell survivalbioRxiv - Cell Biology 2023Quote: ... cells in relation to the total cell number (Hoechst-positive cells) with the ImageXpress® Micro XLS Widefield High-Content Analysis System and MetaXpress® Software (Molecular Devices Sunnyvale, CA, USA).
-
bioRxiv - Biochemistry 2023Quote: ... Voltage clamp was applied with two borosilicate-glass Ag/AgCl microelectrodes filled with 3 M KCl (0.5 to 3 MΩ tip resistance) connected to an O725C amplifier (Warner Instrument) and a Digidata 1440A interface controlled via pCLAMP 10.7 software (Molecular Devices). Currents were filtered using a 10-Hz low-pass filter and sampled at 1 kHz ...
-
bioRxiv - Biochemistry 2023Quote: All activity assays were performed spectrophotometrically using a SpectraMax plus 348 or SpectraMax ABS Plus 96-well plate reader (Molecular Devices). Unless otherwise stated ...
-
bioRxiv - Neuroscience 2023Quote: ... Data were collected using a Multiclamp 700B amplifier (Molecular Devices), low-pass filtered at 10 kHz and digitally sampled at 20 kHz ...
-
bioRxiv - Cell Biology 2023Quote: ... The junction potential was calculated to be -17 mV using a built-in function in the Clampfit software (Molecular Devices). Several less abundant anions (phosphocreatine ...
-
bioRxiv - Neuroscience 2023Quote: Data were collected and analyzed using pClamp 10.5 (Molecular Devices) and fitted using Sigmaplot 11.0 (SSPS) ...
-
bioRxiv - Microbiology 2023Quote: ... 5% CO2 before live cell imaging was done by (ImageXpressMicro-confocal, Molecular Devices, USA) equipped with 4x S Fluor lens in two channels ...
-
bioRxiv - Biophysics 2023Quote: ... An Axopatch 200b (Molecular Devices) was connected to the electrodes and used to apply voltage and measure ion current ...
-
bioRxiv - Immunology 2023Quote: ... Luminescence was measured with SpectraMax i3 (Molecular devices).
-
bioRxiv - Cancer Biology 2023Quote: ... Calcium 6 dye stock solution was prepared by dissolving a vial from Calcium 6 assay kit (Molecular Devices, #5024048) in 10 ml sterile-filtered nominal Ca2+ free (NCF) ...
-
bioRxiv - Bioengineering 2023Quote: ... Luminescence intensity was measured via SpectraMax luminometer (Molecular Devices). To compensate for different proliferation rates across conditions ...
-
bioRxiv - Bioengineering 2023Quote: ... The assay plates were then incubated at room temperature for 5 min and luminescence was measured using the SpectraMax M3 microplate reader (Molecular Devices) set at 500 ms integration/well.
-
bioRxiv - Cell Biology 2023Quote: ... Emission light was detected using an Orca-AR camera controlled by MetaFluor software (Molecular Devices Corp.). Filipin imaging was visualized on a laser scanning confocal microscope (Zeiss LSM 780 ...
-
bioRxiv - Immunology 2023Quote: ... stopped with 100 uL of 1% sodium dodecyl sulfate (SDS) in distilled water and read at 450 nm using a Spectra-Max plate reader (Molecular Devices. Sunnyvale, CA).
-
bioRxiv - Cell Biology 2023Quote: ... both with inverted fluorescence and Differential Interference Contrast (DIC) and controlled with MetaMorph software (Molecular Devices, Eugene, OR). Both microscopes were equipped with a 60x objective (NA=1.45) ...
-
bioRxiv - Neuroscience 2023Quote: ... and analyzed with pClamp10 (Molecular Devices). To characterize the intrinsic membrane properties of neurons ...
-
bioRxiv - Neuroscience 2023Quote: ... Recordings were amplified using a Multiclamp 700B amplifier (Molecular Devices) and digitized using a Digidata 1440A (Molecular Devices) ...
-
bioRxiv - Neuroscience 2023Quote: ... and digitized using a Digidata 1440A (Molecular Devices). Patch electrodes (ranging from 6 to 9 MΩ ...
-
bioRxiv - Neuroscience 2023Quote: ... The membrane resistance (Rm) and capacitance (Cm) were directly measured by Clampex (Molecular Devices) in voltage-clamp mode ...
-
bioRxiv - Molecular Biology 2023Quote: ... Images were further handled by using MetaMorph (Molecular Devices).
-
bioRxiv - Cell Biology 2023Quote: ... 1-ms pulse width) and the acquisition sequence driven by MetaMorph Software (Molecular Devices) or Zeiss Zen2 software at 5 Hz frequency ...
-
bioRxiv - Microbiology 2023Quote: ... was used and the concentration was determined spectrophotometrically using a 96-well plate with a microplate reader (FilterMax F5, Molecular Devices, CA) in which the absorbance was measured at 540 nm ...
-
bioRxiv - Biophysics 2023Quote: ... Voltage was clamped with an Axopatch 200B amplifier (Molecular Devices). Currents were low-pass filtered at 1 kHz ...
-
bioRxiv - Biophysics 2023Quote: ... using a Multiclamp 700B amplifier (Molecular Devices). The signals were filtered at 10 kHz and digitized at sampling rate of 20 kHz with an Axon Digidata 1550B digitizer (Molecular Devices ...
-
bioRxiv - Biophysics 2023Quote: ... and pCLAMP 10.7 software (Molecular Devices). Myocytes were attached to PLL coated glass coverslips 1-3 hours before recording and placed in the recording chamber ...