Labshake search
Citations for Molecular Devices :
8601 - 8650 of 10000+ citations since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2020Quote: ... Analysis of sEPSCs was performed using a template matching algorithm in ClampFit 10.7 (Molecular Devices, San Jose, CA). The template was created using recordings from multiple pyramidal cells and included several hundred synaptic events ...
-
bioRxiv - Neuroscience 2020Quote: ... which was connected to the computer with a Digidata 1440A ADC (Molecular Devices, San Jose, CA), and recorded at a sampling rate of 20 kHz with pClamp software (Molecular Devices ...
-
bioRxiv - Neuroscience 2020Quote: ... and recorded at a sampling rate of 20 kHz with pClamp software (Molecular Devices, San Jose, CA). We did not correct for the junction potential ...
-
bioRxiv - Neuroscience 2020Quote: ... The latter were exported from LabScribe to Clampfit (Molecular Devices), and both sets of signals were merged in a single file ...
-
bioRxiv - Neuroscience 2020Quote: ... and MetaMorph software (Molecular Devices). Data were analyzed using custom scripts in MATLAB (Mathworks ...
-
bioRxiv - Neuroscience 2020Quote: ... The absorbance was read at 570 nm with a Spectra Max 250 model plate reader (Molecular Devices, Sunnyvale, CA).
-
bioRxiv - Neuroscience 2020Quote: ... Responses were amplified with a Multiclamp 700B amplifier (Molecular Devices, USA), digitized with digital-analogue converter board NI PCI-6221 (National Instruments ...
-
bioRxiv - Neuroscience 2020Quote: ... and Digidata 1550 digitizer (Molecular Devices, CA). Glass electrode pipettes were pulled from borosilicate glass (1B120F-4 ...
-
bioRxiv - Neuroscience 2020Quote: ... and analyzed offline with Clampfit 10.7 software (Molecular Devices). Cells were held at -60 mV ...
-
bioRxiv - Biochemistry 2020Quote: ... using a microplate reader (Molecular Devices SpectraMax Paradigm) and calibrated with known amounts of H2O2 at the end of each run in the presence of all inhibitors and effectors (56) ...
-
bioRxiv - Biochemistry 2020Quote: ... using a microplate reader (Molecular Devices SpectraMax Paradigm) and calibrated with known amounts of H2O2 at the end of each run in the presence of all substrates.
-
bioRxiv - Neuroscience 2020Quote: ... Luminosity was recorded 20 minutes after drug or DMSO vehicle addition with a FlexStation 3 Multi-Mode Microplate Reader (Molecular Devices).
-
bioRxiv - Biochemistry 2020Quote: ... and fluorescence polarization of fluorescein was measured at 25 °C using a SpectraMax M5 (Molecular Devices).
-
bioRxiv - Biochemistry 2020Quote: ... Conversion of GTP to the product 2,5-diamino-6-β-ribosyl-4(3H)-pyrimidinone-5’-phosphate (DARPP) was monitored by measuring absorbance at 310 nm for 5 min using a microplate reader (Spectramax M5, Molecular Devices). The reaction rate was calculated using the extinction coefficient for DARPP (7.43 cm-1 mM-1 ...
-
bioRxiv - Neuroscience 2020Quote: ... as well as using a template-matching system in Clampfit (Molecular Devices). For analysis of input/output curves ...
-
bioRxiv - Neuroscience 2020Quote: ... Data was acquired with and analyzed with pClamp 10 software (Molecular Devices). Cell capacitance was measured as described (Paula Patricia Perissinotti et al. ...
-
bioRxiv - Neuroscience 2020Quote: ... 10.6.2.2 (Molecular Devices). Neurons were included in the analysis if input resistance ...
-
bioRxiv - Neuroscience 2020Quote: Using custom scripts written in Metamorph (Molecular Devices, California U.S.A.), a median filter (radius ...
-
bioRxiv - Neuroscience 2020Quote: ... We set a microplate reader (Molecular Devices, SpectraMax Plus 384) to 37°C and measured the chemoluminescence of the samples at 405 nm every 30 seconds for a total of 2 hours ...
-
bioRxiv - Neuroscience 2020Quote: ... We used SoftMax Pro 5.4.1 (Molecular Devices) to measure and calculate Vmax calculations for all samples.
-
bioRxiv - Neuroscience 2020Quote: ... Ca2+ transients (CaTs) were detected using a template-matching algorithm implemented in pClamp 10 (Molecular Devices), and their times of peak were defined as the times of CaT occurrence ...
-
bioRxiv - Neuroscience 2020Quote: ... the recorded unit was stimulated by a current pulse of 250ms long (50 % duty cycle, 1-10 nA) sent through the recording electrode by axoClamp 2B (in bridge mode; Molecular Devices). Then ...
-
bioRxiv - Neuroscience 2020Quote: ... the signal was amplified by 10 fold in axoClamp 2B (in bridge mode; Molecular Devices). Then ...
-
bioRxiv - Neuroscience 2020Quote: Patch-clamp recordings were made at the temperature of 32-34°C using a Multiclamp 700A (Molecular Devices, Sannyvale, CA) and electrical signals were acquired at 20 kHz using a USB-6221 board (National Instruments ...
-
bioRxiv - Neuroscience 2020Quote: ... Ex vivo recordings: Ex vivo electrophysiological data were analyzed using ClampFit 10.3/10.6 (Molecular Devices LLC) and OriginPro (version 7 and 9 ...
-
bioRxiv - Neuroscience 2020Quote: ... Recordings were obtained using a Multiclamp 700B amplifier and Digidata 1440A digitizer controlled by Clampex 10.3/10.6 (Molecular Devices LLC). Signals were sampled at 20 kHz and low-pass filtered at 4 kHz ...
-
bioRxiv - Neuroscience 2020Quote: ... and analyzed by pCLAMP software (Molecular Devices, Union City, CA). Data were discarded when the input resistance changed >20% during recording.
-
bioRxiv - Neuroscience 2020Quote: ... and digitized with a 1550A analogue/digital convertor (Molecular Devices). Data were acquired at 20 KHz and filtered at 2 KHz with pCLAMP 10 (Molecular Devices) ...
-
bioRxiv - Neuroscience 2020Quote: ... Data were acquired at 20 KHz and filtered at 2 KHz with pCLAMP 10 (Molecular Devices). Brain slices were perfused with recording aCSF at 1-2 mL/min with constant oxygenation ...
-
bioRxiv - Neuroscience 2020Quote: ... Data acquisition and analysis: membrane currents and potentials were amplified and low-pass filtered at 3 kHz using a Multiclamp 700B amplifier (Molecular Devices), digitized at 10 kHz and acquired using National Instruments acquisition boards and a custom version of ScanImage written in MATLAB ...
-
bioRxiv - Biophysics 2020Quote: ... All recordings were performed at room temperature with a holding potential of −60 mV using an Axopatch 200B amplifier (Molecular Devices). Data were acquired using AxoGraph software (Axograph ...
-
bioRxiv - Biophysics 2020Quote: Current desensitization decays were fitted using exponential decay functions in Clampfit (Molecular Devices). The percent of steady-state current was the current at the end of a pH application which had reached equilibrium divided by the peak current ...
-
bioRxiv - Neuroscience 2020Quote: ... All data were acquired through an analog-to-digital converter (Digidata 1322A or 1550A, Molecular Devices) for storage on computer hard disk with pClamp software (v9.0 or v10.4 ...
-
bioRxiv - Neuroscience 2020Quote: ... The staining at 24-well plates was subsequently analyzed at Ex/Em = 549/575 nm by microplate spectrophotometry (SoftMax1 Pro software; Molecular Devices).
-
bioRxiv - Neuroscience 2020Quote: ... Clampfit (Molecular Devices) and Matlab (Mathworks).
-
bioRxiv - Neuroscience 2020Quote: ... Measurements of [Ca2+]e peaks were done using Clampfit (Molecular Devices).
-
bioRxiv - Neuroscience 2020Quote: ... and Digidata 1440A or Digidata 1550B interface (Molecular Devices), using pCLAMP 10 or 11 ...
-
bioRxiv - Biophysics 2020Quote: ... The recording electrode was a chlorinated silver wire (0.25 mm thickness, 1-HLA-005, Molecular Devices, California, USA).
-
bioRxiv - Neuroscience 2020Quote: ... Cell body area was measured using ‘trace area’ tool in MetaMorph software (Molecular Devices). Numbers of cells in different layers of cortex was counted in ImageJ by using ‘cell counter’ plugin ...
-
bioRxiv - Neuroscience 2020Quote: ... Images were acquired and pseudo coloured using MetaMorph software (Molecular Devices) for Nikon Eclipse 80i microscope and Zen software for confocal LSM880 microscope.
-
bioRxiv - Biophysics 2020Quote: ... Data recorded at 5 kHz and filtered at 1 kHz were and digitized using a Digidata interface board (1322A or 1440A, Axon Instruments) and analyzed with pCLAMP 10.3 software (Molecular Devices, Sunnyvale, CA). Microelectrode with a resistance of 1–4 MΩ were filled with 3 M KCl ...
-
bioRxiv - Neuroscience 2020Quote: ... The image acquisition was controlled by Metamorph (Molecular devices). Image acquisition was performed by illuminating with 488 or 561 nm laser and fluorescence were collected with filters to observes Green and Red fluorescence proteins in total internal reflection microscopy mode at 50Hz (Gataca Systems ...
-
bioRxiv - Neuroscience 2020Quote: ... Image acquisition was controlled using MetaMorph software (Molecular Devices). Super resolved intensity images and single particle trajectories were obtained using custom built analysis for high density single particle tracking which were described previously (Nair et al ...
-
bioRxiv - Neuroscience 2020Quote: ... Intrinsic electrophysiological properties were recorded in current clamp mode in response to depolarising or hyperpolarising current pulses of 500ms delivered at 0.5Hz via Clampex (v.10.1, Molecular Devices). Data was analyzed offline using a Matlab custom-written script.
-
bioRxiv - Neuroscience 2020Quote: ... Neurons ∼50µm below the slice surface were targeted for whole-cell patch-clamp recordings at RT using a MultiClamp 700B amplifier and a Digidata 1440A digitiser (Molecular Devices, USA). A standard potassium-based intracellular electrode solution of the following composition (in mM) ...
-
bioRxiv - Neuroscience 2020Quote: ... Electrophysiological recordings were extracted using Clampfit (Molecular Devices) and analyzed with R.
-
bioRxiv - Neuroscience 2020Quote: Signals were recorded with an Axon MultiClamp 700B amplifier and digitized at 20 kHz with an Axon Digidata 1550B digitizer (Molecular Devices, San Jose, CA, USA). Access resistance and pipette capacitance were compensated for ...
-
bioRxiv - Neuroscience 2020Quote: ... and data were acquired at 50 kHz using AxoScope 10.5 /10.7 (Molecular Devices). Evoked oxidation currents were converted to [DA]o from post-experimental calibrations of the CFMs ...
-
bioRxiv - Neuroscience 2020Quote: ... Figures were made using Clampfit 10.5 (Axon Instruments/Molecular Devices), MATLAB (MathWorks) ...
-
bioRxiv - Neuroscience 2020Quote: ... Analog signals were digitized (10-20 kHz) using either a Digidata 1440 (Axon Instruments/Molecular Devices) or a Micro 1401 A/D board (Cambridge Electronic Design) ...