Labshake search
Citations for 3M :
1 - 50 of 111 citations for 10 PROPOXY DECANOIC ACID since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2020Quote: ... Digested peptides were acidified with 10% formic acid (FA) to pH ∼2 and desalted using stage tips with Empore C18 SPE Extraction Disks (3M) and dried under vacuum.
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... Digested peptides were acidified with 10% formic acid to pH ~2 and desalted using stage tips with Empore C18 SPE Extraction Disks (3M) and dried under vacuum.
-
bioRxiv - Molecular Biology 2019Quote: ... 37% phosphoric-acid gel (Scotchbond Etchant, 3M ESPE) was used for 20 s and further washed with water for 15 s ...
-
bioRxiv - Plant Biology 2020Quote: ... Then 50 μL of each sample were mixed with 115 μL of acid molybdate solution (17.55 g/L of Ammonium molybdate tetrahydrate, 3M sulfuric acid) and 700 μL of deionized water ...
-
bioRxiv - Bioengineering 2023Quote: ... the biodome was then placed in an acid bath (3M HCl) overnight (≥ 10 hours) ...
-
bioRxiv - Biochemistry 2021Quote: ... Fatty acids from total lipids were released by saponification (refluxing with 3mL 0.3M KOH in 90% methanol at 80°C for 1 hour and remaining ∼300μL solvent) ...
-
bioRxiv - Genetics 2022Quote: ... pH 7 (SSC 20x: 3M NaCl and 0.3M citric acid trisodium salt dihydrate). For this suspension ...
-
bioRxiv - Neuroscience 2023Quote: ... Carbon dioxide was chemically generated using sulfuric acid (1M) and sodium carbonate (0.3M) via the reaction ...
-
bioRxiv - Immunology 2020Quote: ... was added and the reaction was stopped with the addition of acid solution (3M H3PO4). Absorbance (A450 nm ...
-
bioRxiv - Molecular Biology 2023Quote: ... Samples were acidified to 0.5% formic acid (FA) and desalted using home-made C18 (3M Empore) stage tips filled with 4 μl of Poros Oligo R3 resin (Thermo Fisher) ...
-
bioRxiv - Immunology 2020Quote: ... TMB substrate was added and the reaction was stopped by the addition of acid solution (3M H3PO4). Absorbance was measured by Synergy Mx microtiter plate reader (Biotek).
-
bioRxiv - Plant Biology 2021Quote: ... 0.1% formic acid (FA) and desalted on self-packed StageTips (five disks, Ø 1.5 mm C18 material, 3M EmporeTM ...
-
bioRxiv - Genetics 2022Quote: Dot blot membranes were rinsed in 2X SSC (20x: 3M NaCl and 0.3M citric acid trisodium salt dihydrate) and pre-hybridized for 15’ with Tetramethylammonium Chloride (TMAC ...
-
bioRxiv - Molecular Biology 2020Quote: ... 10 % sodium acetate (3M, pH 5.5), 4 μL of glycogen ...
-
bioRxiv - Neuroscience 2020Quote: ... in 400µl of HCl (10−3M). Adults were placed by 4-6 in tanks (fish facility home tanks for several weeks ...
-
bioRxiv - Bioengineering 2021Quote: ... l-cysteine (2 × 10-3M, Sigma), sodium phosphate (50 × 10-3M ...
-
bioRxiv - Bioengineering 2023Quote: ... black tape (6132-BA-10, 3M), black rubber (5508T44 ...
-
bioRxiv - Bioengineering 2024Quote: ... 1% sodium pyruvate (100 × 10-3M) and 1% penicillin-streptomycin-glutamine solution (100X) ...
-
bioRxiv - Molecular Biology 2022Quote: ... The digested peptides were desalted with 60% acetonitrile/0.3% formic acid through the three disks of C-18 Empore SPE disks (3M) in a 200 μl pipet tip ...
-
bioRxiv - Molecular Biology 2022Quote: ... Peptides were desalted with stage tips using the following procedure: Peptides were reconstituted with 5% acetonitrile/0.1 % formic acid and loaded onto Empore C18 disks (3M) packed into a 200 µl pipette tips pre-equilibrated with LC-MS grade methanol and water containing 0.1% formic acid ...
-
bioRxiv - Biophysics 2023Quote: ... Half of each samples was acidified (0.05% formic acid) followed by desalting and concentration by micro solid phase extracted (Empore, 3M)48 ...
-
bioRxiv - Developmental Biology 2020Quote: ... of labeled peptides were then mixed with 0.1% trifluoroacetic acid (TFA) (Pierce) to generate a test mix which was desalted by StageTip fractionation with Empore C18 filters (3M) (Rappsilber et al. ...
-
bioRxiv - Neuroscience 2021Quote: ... layer [35] glued to a custom 3D-printed polylactic acid frame was implanted on the exposed brain and secured to the skull using VetBond (3M) and dental cement ...
-
bioRxiv - Microbiology 2021Quote: ... Digested samples were acidified to a final concentration of 0.5% formic acid and desalted with home-made high-capacity StageTips composed of 1 mg Empore™ C18 material (3M) and 5 mg of OLIGO R3 reverse phase resin (Thermo Fisher Scientific ...
-
bioRxiv - Microbiology 2021Quote: ... Digested samples were acidified to a final concentration of 0.5% formic acid and desalted with home-made high-capacity StageTips composed of 1 mg Empore™ C18 material (3M) and 5 mg of OLIGO R3 reverse phase resin (Thermo Fisher Scientific ...
-
bioRxiv - Immunology 2020Quote: ... Labeled samples were acidified using triflouroacetic acid (TFA) and cleaned-up using StageTip (3-disc plug of C18 Empore material, 3M). StageTip’s were conditioned by rinsing them with (2x ...
-
bioRxiv - Molecular Biology 2022Quote: ... Peptides were desalted using stage-tips containing a Poly-styrene-divinylbenzene copolymer modified with sulfonic acid groups (SDB-RPS; 3M) material ...
-
bioRxiv - Cell Biology 2023Quote: ... membranes were briefly washed twice with wash buffer (0.1M Maleic acid, 3M NaCl; 0.1% Tween 20 adjusted to pH 7.5), before blocking for 30 minutes and probing with a DIG antibody for 30 minutes ...
-
bioRxiv - Microbiology 2023Quote: ... samples were acidified to 0.3% formic acid with 10% formic acid and cleaned up with an MCX STAGE tip (39) using Empore SDB-RPS extraction disks material from 3M. The eluted samples were Speedvaced to dryness.
-
bioRxiv - Biochemistry 2023Quote: ... The resulting peptide mixtures were collected using a magnetic rack, acidified with Buffer A* (0.1% trifluoroacetic acid, 2% acetonitrile) and desalted using C18 StageTips (Empore™, 3M) with the addition of Oligo-R3 resin reverse phase material (Thermo ...
-
bioRxiv - Biochemistry 2021Quote: ... The crude F1 preparation was loaded onto a 5mL HisTrap HP 5 mL column at 4 °C and washed with 300 mL of 97 % wash buffer (10% MeOH, 10% glycerol, 0.3M NaCl ...
-
bioRxiv - Neuroscience 2019Quote: Rats respond to intra-oral deliveries of Qui in the concentration range used in our experiments (10−4 to 10−3M) with an initial set of non-specific investigative licks that are followed by large ...
-
bioRxiv - Immunology 2021Quote: ... and 10 μl sodium acetate (3M, pH 5.2) were added ...
-
bioRxiv - Biochemistry 2021Quote: ... 10% v/v Ethylene glycols mix (contains 0.3M Diethylene glycol ...
-
bioRxiv - Bioengineering 2021Quote: ... sodium phosphate (50 × 10-3M, Thermo Fisher Scientific) and EDTA (2×10-3M ...
-
bioRxiv - Bioengineering 2021Quote: ... and EDTA (2×10-3M, Thermo Fisher Scientific) and then digested at 65 °C overnight ...
-
bioRxiv - Cell Biology 2022Quote: ... Each sample was acidified in formic acid and subjected to SPE on an Empore SD C18 plate (3M catalogue# 6015 SD). Each sample was lyophilized and reconstituted in 140mM HEPES ...
-
bioRxiv - Biochemistry 2022Quote: ... Digests were acidified by addition of 0.5% (v/v) formic acid (FA) and desalted using self-packed StageTips (three disks per micro-column, ø 1.5mm, C18 material, 3M Empore). The peptide eluates were dried to completeness and stored at −80°C ...
-
bioRxiv - Molecular Biology 2023Quote: ... formic acid (FA) and desalted using self-packed StageTips (five disks per micro-column, ø 1.5 mm, C18 material, 3M Empore). The peptide eluates were dried to completeness and stored at −80 °C ...
-
bioRxiv - Molecular Biology 2024Quote: ... formic acid (FA) and desalted using self-packed StageTips (five disks per micro-column, ø 1.5 mm, C18 material, 3M Empore). The peptide eluates were dried to completeness and stored at −80 °C ...
-
bioRxiv - Microbiology 2022Quote: ... after which 10 μl of 10% TFA was added and samples were ready for StageTipping using C18 as resin (Empore, 3M, USA). For analysis ...
-
bioRxiv - Developmental Biology 2022Quote: ... Desalted peptides were reconstituted in 0.1% formic acid in water and further separated into four fractions by strong cation exchange chromatography (SCX, 3M Purification, Meriden, CT). Eluates were first dried in a SpeedVac ...
-
bioRxiv - Biochemistry 2019Quote: ... The beads were resuspended in 200 μl of 0.1% by vol trifluoroacetic acid and loaded onto C8 stage-tips (3M Empore, #2214, USA) to separate the beads from the flow through which was discarded ...
-
bioRxiv - Genetics 2021Quote: ... Desalted peptides were reconstituted in 0.1% formic acid in water and further separated into four fractions by strong cation exchange chromatography (SCX, 3M Purification, Meriden, CT). Eluates were first dried in a SpeedVac ...
-
bioRxiv - Cancer Biology 2020Quote: ... Desalted peptides were reconstituted in 0.1% formic acid in water and further separated into four fractions by strong cation exchange chromatography (SCX, 3M Purification, Meriden, CT). Eluates were first dried in a SpeedVac ...
-
bioRxiv - Developmental Biology 2022Quote: ... Desalted peptides were reconstituted in 0.1% formic acid in water and further separated into four fractions by strong cation exchange chromatography (SCX, 3M Purification, Meriden, CT). Eluates were first dried in a SpeedVac ...
-
bioRxiv - Developmental Biology 2023Quote: ... Desalted peptides were reconstituted in 0.1% formic acid in water and further separated into four fractions by strong cation exchange chromatography (SCX, 3M Purification, Meriden, CT). Eluates were first dried in a SpeedVac ...
-
bioRxiv - Molecular Biology 2023Quote: ... Desalted peptides were reconstituted in 0.1% formic acid in water and further separated into four fractions by strong cation exchange chromatography (SCX, 3M Purification, Meriden, CT). Eluates were first dried in a SpeedVac ...
-
bioRxiv - Systems Biology 2020Quote: ... Blocking buffer (0.3M glycine buffer, 10% Goat Serum, 1XPBS) was added to ‘dry’ pellets on ice for 1 hour ...
-
bioRxiv - Neuroscience 2021Quote: ... after trypsin digestion ach sample was acidified in formic acid and subjected to SPE on an Empore SD C18 plate (3M catalogue# 6015 SD). Each sample was lyophilized and reconstituted in 140mM HEPES ...