Labshake search
Citations for Eppendorf :
1 - 50 of 1068 citations for 6 N CARBETHOXY 3 CHLORO 7 8 DIHYDRO 5H PYRIDO 4 3 C PYRIDAZINE since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2022Quote: Samples were incubated on a rotator for 5 min at 4°C and then centrifuged at 500g for 5 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3). Supernatant was removed and pellet was resuspended in sort buffer [1mM EDTA (Invitrogen ...
-
bioRxiv - Cell Biology 2022Quote: ... Sorted nuclei were then centrifuged at 1000 g for 15 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3), and supernatant was removed ...
-
bioRxiv - Immunology 2022Quote: ... The mixture was incubated for 5h at 31°C on a thermoblock (Eppendorf), followed by the removal of 2-MEA by buffer-exchanging to PBS using 100kDa Vivaspin6 columns (Sartorius ...
-
bioRxiv - Genomics 2022Quote: ... Beads and proteins were incubated for 3 hours at 4°C (Eppendorf ThermoMixer, 1,300 rpm). Beads were then washed four times with lysis buffer and recovered in 40 µl of laemmli buffer (50 mM Tris-Cl pH 6.8 ...
-
bioRxiv - Physiology 2019Quote: ... The remaining homogenate was heated for 10 min at 70°C and spun for 3 min at top speed at 4°C (Eppendorf 5415R). The supernatant was transferred to a new tube and heated for 10 min at 70°C ...
-
bioRxiv - Plant Biology 2022Quote: ... annealing at 51 °C for 30 s and extension 72 °C for 30 s for 25 cycles by final extension 72 °C for 3 min and reaction hold at 4 °C in a thermocycler (Gradient thermocycler® Eppendorf). Amplified gene products were sequenced using the Sanger sequencing method ...
-
bioRxiv - Biochemistry 2021Quote: ... cell cultures were collected by centrifugation at 3,300 rpm for 3 min at 4°C (using Eppendorf centrifuge 5810R equipped with the A-4-62 rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... the expelled homogenate was palleted by centrifugation for 3 min (at 300 g at 4°C) (Eppendorf). The pellet was discarded ...
-
bioRxiv - Plant Biology 2023Quote: ... The primers were annealed at 95°C for 4 min followed by 70°C for 3 min in a thermocycler (Eppendorf, Hamburg, Germany). The reaction was allowed to cool slowly to room temperature ...
-
bioRxiv - Microbiology 2021Quote: ... centrifuged at 7000 RPM for 7 min at 4 °C (Eppendorf model 5804R). The supernatant was discarded ...
-
bioRxiv - Cell Biology 2021Quote: ... were vortexed 3 min at room temperature followed by centrifugation at 4,500 x g for 5 min at 4°C (Eppendorf #5010R). The supernatant fluid was poured into a chilled 2 ml screw-capped tube ...
-
bioRxiv - Molecular Biology 2022Quote: ... Cell pellets of OD600 = 3-6 units (as measured using an Eppendorf BioPhotometer) were resuspended in 300 µL of 20 % TCA and 100 µL of acid-washed glass beads ...
-
bioRxiv - Cancer Biology 2022Quote: ... Samples were vigorously vortex-mixed for 3 min and centrifuged at 14,000 rpm for 10 min at 4 °C (Eppendorf 5804 R). The clear supernatant was then transferred to a separate vial ...
-
bioRxiv - Systems Biology 2021Quote: ... Total volume of 20 mL from each culture was transferred to a 50 mL Falcon® filled with ice and was immediately centrifuged at 3000 rpm for 3 min at 4 °C (Eppendorf centrifuge). Next the supernatant was discarded and the cell pellet was snap frozen into liquid nitrogen and stored at -80 °C ...
-
bioRxiv - Systems Biology 2021Quote: For the extraction of total proteome 10 mL of each culture were transferred into ice-cold 15 mL Falcon® tubes which were centrifuged immediately at 3000 rpm for 3 min at 4 °C (Eppendorf centrifuge). The supernatant from the centrifugation was discarded and the cell pellets were washed once with 1 mL of cold PBS buffer ...
-
bioRxiv - Cancer Biology 2021Quote: ... 3-6 pooled tissue biopsies were moved into a precooled 1.5 mL tube (Eppendorf, Germany) containing 300µL digestion cocktail consisting of Gibco RPMI 1640 (Thermo Fisher Scientific ...
-
bioRxiv - Systems Biology 2019Quote: ... and 74.9 °C for 3 minutes in a thermocycler (Mastercycler Pro, Eppendorf, Hamberg, Germany) system as described elsewhere (Jafari et al. ...
-
bioRxiv - Synthetic Biology 2020Quote: ... These reactions were incubated for 3 h at 30°C with 500 rpm shaking (Thermo Mixer C, Eppendorf, Germany). Post-incubation ...
-
A DNA-based optical nanosensor for in vivo imaging of acetylcholine in the peripheral nervous systembioRxiv - Bioengineering 2020Quote: The DNA scaffold was self-assembled by incubating 5 DNA oligonucleotides following a temperature gradient from 95 °C to 4 °C for 6 h in a thermocycler (Mastercycler® nexus X2, Eppendorf) in Tris-EDTA buffer (TE buffer ...
-
bioRxiv - Systems Biology 2022Quote: ... After denaturation at 78 °C for 3 min on a flatblock thermocycler (Eppendorf, Mastercycler Nexus), samples were incubated at 45 °C for 36–48 hr in a benchtop incubator ...
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Microbiology 2020Quote: ... we pelleted 6 mL of culture for 3 min at 7000 rpm (Benchtop centrifuge 5424 Eppendorf, Hamburg, Germany) inside a glove-box (MBraun ...
-
bioRxiv - Microbiology 2022Quote: ... were also added to each tube and incubated at 37°C for 3 h in a thermomixer (Eppendorf Thermomixer C, Hamburg, Germany). After 3 h incubation ...
-
bioRxiv - Cell Biology 2021Quote: ... 3-liter Bioflo 110 (Eppendorf) were used ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The grown cultures were pelleted using a centrifuge (Eppendorf, 5804 R; 5000 RPM, 22°C, 3 min), washed and re-suspended in 0.8% sterile NaCl solution ...
-
bioRxiv - Neuroscience 2024Quote: ... samples were layered on top of the 105 µl cushion and spun at 10,000 g for 20 min at 4°C in a swing out rotor (A-8-11 swing bucket rotor, Eppendorf) to isolate CpxII bound to trans SNARE complexes (SNAREpins ...
-
bioRxiv - Neuroscience 2020Quote: The homogenates were pelleted at 400xg for 6 minutes at 4°C in a swing-bucket rotor centrifuge (Eppendorf). The supernatants were removed and 1 ml ice-cold DPBS (pH 7.3-7.4 ...
-
bioRxiv - Molecular Biology 2023Quote: ... Yeast were centrifuged at 3,000 rpm for 3 min in an A-4-62 swing bucket rotor (Eppendorf) and resuspended in 20 ml 1 M sorbitol and incubated at 4 °C overnight (<18 h) ...
-
bioRxiv - Systems Biology 2019Quote: ... and the bacterial cells were harvested by centrifugation (swing-out rotor A-4-44, Eppendorf; 3220 g, 8 min, 30°C). The cell pellet was resuspended in the mineral medium and centrifuged again ...
-
bioRxiv - Cell Biology 2024Quote: ... and denatured at 85°C for 7 minutes using a ThermoMixer® C-PCR 384 (Eppendorf). After denaturation ...
-
bioRxiv - Neuroscience 2023Quote: ... The tubes were centrifuged at 3000 x g for 6 min at 4 °C and the conditioned media was transferred to a Protein LoBind tube (Eppendorf) (media fraction) ...
-
bioRxiv - Neuroscience 2020Quote: ... centrifuged (16000 g, 3 min, 5415R, Eppendorf) and re-suspended in fresh medium ...
-
bioRxiv - Plant Biology 2021Quote: ... 4 C (Eppendorf Centrifuge 5418 R). Proteins in the clear supernatant (protein extract ...
-
bioRxiv - Plant Biology 2021Quote: ... 4 C (Eppendorf Centrifuge 5418 R). 15 µg of recombinant FAMOSS-streptavidin/streptavidin was added to supernatant and incubated 1h on ice with rotation ...
-
bioRxiv - Biochemistry 2021Quote: ... In vitro translation reactions were carried out for the indicated proteins using rabbit reticulocyte lysate and SP cells at a final concentration of 3×106 cells/ml at 30°C for 40 min in a thermomixer (Eppendorf) set to 900 rpm ...
-
bioRxiv - Molecular Biology 2023Quote: ... the rehydrated gel pieces were overlaid with 30 μL of 0.01% ProteaseMAX in 50 mM ammonium bicarbonate and incubated at 37°C for 3 hours with shaking at 800 rpm (Thermomixer, Eppendorf). The digestion reaction was transferred to a fresh tube ...
-
bioRxiv - Neuroscience 2023Quote: ... PFF oligomers were incubated with or without SVD-1a in PBS pH 7.4 for 3 d at 37 °C under quiescent condition in low retention Eppendorf tubes (Eppendorf, GE). Prior to injection ...
-
bioRxiv - Synthetic Biology 2022Quote: The concentration and quality of the plasmid solutions were determined by diluting 1 ul of plasmid solution in 4 ul of Tris EDTA buffer and loading 3 ul of the diluted solution on a μCuvette G1 (Eppendorf). Optical densities were measured at 260 nm and 280 nm using a BioSpectrophotometer and Fluorimeter (Eppendorf) ...
-
bioRxiv - Microbiology 2021Quote: ... The cells were incubated with the dye and shaken for 20 minutes at room temperature in the dark, then washed by centrifugation (3 min, 8000 RPM, 28 °C (Eppendorf 5430R)) and resuspension in M2G three times ...
-
bioRxiv - Neuroscience 2023Quote: ... They were then resuspended to a concentration of ∼800-3000 nuclei per uL across 3-4 x twin.tec™ 96 Well LoBind PCR Plates (Eppendorf, 0030129512) in NSB ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were maintained in a humidified atmosphere of 5% CO2 and 37 °C and were passaged every 2-3 days into 10 cm polystyrene coated plates (Eppendorf; EP0030700112-300EA) upon reaching high density ...
-
bioRxiv - Developmental Biology 2023Quote: ... the gRNA:Cas9 ribonucleoprotein complex solution was incubated at 37°C for 5 min and then backfilled into 3 microinjection needles using an Eppendorf GELoader tip (Eppendorf, Cat# 022351656). After loading embryos into the embryo holder which covered with 12.5 ppt of salinity water with 0.0001% of methylene blue ...
-
bioRxiv - Plant Biology 2024Quote: ... SDS at a 1:3 (w/v) ratio and extracted by shaking 1000 RPM 95 °C for using a tabletop shaker (Eppendorf ThermoMixer F2.0). Samples were then centrifuged at 20,000 xg for 10 min at room temperature and the supernatant retained in new tubes ...
-
bioRxiv - Genomics 2019Quote: ... incubated for 5 min at 4 °C with rotation and pelleted again (500 x g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 500 μL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Immunology 2021Quote: ... at 10.000 rpm and 4°C (Eppendorf 5804R), for the removal of residual titanium [16].
-
bioRxiv - Cell Biology 2022Quote: ... for 10 minutes at 4°C (Eppendorf, Germany), and supernatants were transferred into fresh tubes to be evaporated to dryness in a CentreVap concentrator at 40°C (Labconco ...
-
bioRxiv - Bioengineering 2024Quote: ... 15 min at 4°C (Eppendorf, Hamburg, Germany). duRNA was generated through equimolar annealing of trRNA/crRNA in duplex buffer (IDT) ...
-
bioRxiv - Cell Biology 2020Quote: ... This isolation method included a penultimate centrifugation step in Eppendorf polypropylene conical tubes (10,000 x g for 30 min at 4°C, in Eppendorf rotor F-34-6-38) that allowed the removal/isolation of larger microvesicles ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C for 5 minutes (Eppendorf centrifuge 5810 R, Rotor S-4-104). Cell pellets were washed with 5 mL D-PBS and centrifugation was repeated ...