Labshake search
Citations for Eppendorf :
1 - 50 of 1396 citations for 4 Methoxy 2 3 3 4 5 Pentacb 13C12 99% 50 Ug Ml In Toluene since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2022Quote: Samples were incubated on a rotator for 5 min at 4°C and then centrifuged at 500g for 5 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3). Supernatant was removed and pellet was resuspended in sort buffer [1mM EDTA (Invitrogen ...
-
bioRxiv - Systems Biology 2021Quote: ... Total volume of 20 mL from each culture was transferred to a 50 mL Falcon® filled with ice and was immediately centrifuged at 3000 rpm for 3 min at 4 °C (Eppendorf centrifuge). Next the supernatant was discarded and the cell pellet was snap frozen into liquid nitrogen and stored at -80 °C ...
-
bioRxiv - Cell Biology 2022Quote: ... Sorted nuclei were then centrifuged at 1000 g for 15 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3), and supernatant was removed ...
-
bioRxiv - Cell Biology 2021Quote: ... were vortexed 3 min at room temperature followed by centrifugation at 4,500 x g for 5 min at 4°C (Eppendorf #5010R). The supernatant fluid was poured into a chilled 2 ml screw-capped tube ...
-
bioRxiv - Microbiology 2021Quote: ... pelleted by centrifugation (300 rcf, 3 min, RT in 50-mL conical tubes; then 21,000 rcf, 2 min, RT in Eppendorf tubes), and stored at -80 °C ...
-
bioRxiv - Microbiology 2021Quote: ... pelleted by centrifugation (300 rcf, 3 min, RT in 50-mL conical tubes; then 21,000 rcf, 2 min, RT in Eppendorf tubes), and sonicated in chilled PBS (1 s on ...
-
bioRxiv - Genomics 2022Quote: ... Beads and proteins were incubated for 3 hours at 4°C (Eppendorf ThermoMixer, 1,300 rpm). Beads were then washed four times with lysis buffer and recovered in 40 µl of laemmli buffer (50 mM Tris-Cl pH 6.8 ...
-
bioRxiv - Systems Biology 2021Quote: For the extraction of total proteome 10 mL of each culture were transferred into ice-cold 15 mL Falcon® tubes which were centrifuged immediately at 3000 rpm for 3 min at 4 °C (Eppendorf centrifuge). The supernatant from the centrifugation was discarded and the cell pellets were washed once with 1 mL of cold PBS buffer ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C for 5 minutes (Eppendorf centrifuge 5810 R, Rotor S-4-104). Cell pellets were washed with 5 mL D-PBS and centrifugation was repeated ...
-
bioRxiv - Biophysics 2019Quote: ... 6 mL of the selection culture in 2 mL centrifuge tubes was pelleted at 5000 rpm for 5 minutes at 4°C in a microcentrifuge (Eppendorf, 5242R). The supernatant was removed except for the last ∼200 µL ...
-
bioRxiv - Biochemistry 2021Quote: ... cell cultures were collected by centrifugation at 3,300 rpm for 3 min at 4°C (using Eppendorf centrifuge 5810R equipped with the A-4-62 rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... the expelled homogenate was palleted by centrifugation for 3 min (at 300 g at 4°C) (Eppendorf). The pellet was discarded ...
-
bioRxiv - Molecular Biology 2023Quote: ... Yeast were centrifuged at 3,000 rpm for 3 min in an A-4-62 swing bucket rotor (Eppendorf) and resuspended in 20 ml 1 M sorbitol and incubated at 4 °C overnight (<18 h) ...
-
bioRxiv - Genomics 2019Quote: ... incubated for 5 min at 4 °C with rotation and pelleted again (500 x g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 500 μL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Microbiology 2019Quote: ... four 50 mL aliquots from each trap were centrifuged at 3214 x g and 4°C for 30 minutes (Eppendorf 5810 R, S-4-104 rotor). The supernatant was decanted after centrifugation and cell pellets were stored at −80°C until ready for freeze-drying and lipid extraction ...
-
bioRxiv - Microbiology 2022Quote: Cells (2 ml cultures) were spun down (30 s Eppendorf centrifuge, 14,000 rpm, 4 °C), resuspended in 0.4 ml ice-cold growth medium and added to a screw cap Eppendorf tube containing 1.5 g glass beads (0.1 mm) ...
-
bioRxiv - Neuroscience 2021Quote: ... EGFP RVS 5’-3’= TGTGGCGGATCTTGAAGTTAG on a Mastercycler Pro (Eppendorf) thermocycler PCR machine ...
-
bioRxiv - Synthetic Biology 2022Quote: The concentration and quality of the plasmid solutions were determined by diluting 1 ul of plasmid solution in 4 ul of Tris EDTA buffer and loading 3 ul of the diluted solution on a μCuvette G1 (Eppendorf). Optical densities were measured at 260 nm and 280 nm using a BioSpectrophotometer and Fluorimeter (Eppendorf) ...
-
bioRxiv - Biochemistry 2020Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, Eppendorf #A-4-81 rotor) to remove intact cells and debris ...
-
bioRxiv - Physiology 2019Quote: ... The remaining homogenate was heated for 10 min at 70°C and spun for 3 min at top speed at 4°C (Eppendorf 5415R). The supernatant was transferred to a new tube and heated for 10 min at 70°C ...
-
bioRxiv - Cancer Biology 2022Quote: ... Samples were vigorously vortex-mixed for 3 min and centrifuged at 14,000 rpm for 10 min at 4 °C (Eppendorf 5804 R). The clear supernatant was then transferred to a separate vial ...
-
bioRxiv - Plant Biology 2022Quote: ... annealing at 51 °C for 30 s and extension 72 °C for 30 s for 25 cycles by final extension 72 °C for 3 min and reaction hold at 4 °C in a thermocycler (Gradient thermocycler® Eppendorf). Amplified gene products were sequenced using the Sanger sequencing method ...
-
bioRxiv - Neuroscience 2023Quote: ... They were then resuspended to a concentration of ∼800-3000 nuclei per uL across 3-4 x twin.tec™ 96 Well LoBind PCR Plates (Eppendorf, 0030129512) in NSB ...
-
bioRxiv - Cell Biology 2024Quote: ● Sterile 50 mL conical tubes (Falcon) and 2 mL tubes (Eppendorf).
-
bioRxiv - Biochemistry 2022Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) to remove intact cells and debris ...
-
bioRxiv - Plant Biology 2023Quote: ... The primers were annealed at 95°C for 4 min followed by 70°C for 3 min in a thermocycler (Eppendorf, Hamburg, Germany). The reaction was allowed to cool slowly to room temperature ...
-
bioRxiv - Bioengineering 2024Quote: ... Samples were diluted to 2 x 107 cells per mL and 50 µL of each sample was added to 5 mL tubes (Eppendorf, Hamburg, DE), to constitute 1 million cells per flow sample.
-
bioRxiv - Biochemistry 2020Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, Eppendorf #A-4-81 rotor) and washed with ice-cold 50 mL Binding buffer composed of 10 mM imidazole (pH 7.4) ...
-
bioRxiv - Microbiology 2021Quote: ... pelleted by centrifugation (300 rcf, 3 min, RT in 15-mL conical tubes; then 21,000 rcf, 2 min, RT in Eppendorf tubes), and stored at -80 °C until further analysis ...
-
bioRxiv - Biophysics 2020Quote: 96 well plates were coated with immunized vaccine antigen and incubated for two hours at 25 °C (4 μg/mL, in 1xPBS, 50 μL/well) under constant shaking (300 rpm) on a MixMate thermomixer (Eppendorf, USA). ACE2-hFc protein coating was used as a control for antigen immobilization ...
-
bioRxiv - Biophysics 2020Quote: 96 well plates were coated with vaccine antigen and incubated overnight at 25 °C (4 μg/mL in 1x PBS, 50 μl/well) under constant shaking (300 rpm) on a MixMate thermomixer (Eppendorf, USA). Ovalbumin (4 μg/mL in 1x PBS ...
-
bioRxiv - Cell Biology 2019Quote: ... The resin was pelleted down by centrifugation at 4°C at 1258 g for 5 min (Eppendorf #A-4-81 rotor) and washed with 25 ml ice-cold binding buffer [10 mM imidazole ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were maintained in a humidified atmosphere of 5% CO2 and 37 °C and were passaged every 2-3 days into 10 cm polystyrene coated plates (Eppendorf; EP0030700112-300EA) upon reaching high density ...
-
bioRxiv - Bioengineering 2023Quote: ... The resulting injection micropipette was backfilled with 5-10 μL of 500 μg/mL fluorescein solution and was mounted on the microinjection manipulator (InjectMan 4, Eppendorf) connected to a pneumatic microinjection pump (FemtoJet 4i ...
-
bioRxiv - Biochemistry 2022Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) and washed with ice-cold 50 mL Binding buffer composed of 10mM imidazole (pH 7.4) ...
-
bioRxiv - Neuroscience 2022Quote: ... Half medium was changed every 2-3 days using Xplorer multichannel pipettes (Eppendorf) set at lowest speed to not disturb the hostdonor interaction ...
-
bioRxiv - Microbiology 2022Quote: ... The cell suspension was then transferred into 2 mL tubes and centrifuged at 16 000g and 4°C (Eppendorf, Germany) to pellet the cells ...
-
bioRxiv - Biochemistry 2022Quote: ... 3 ml was aliquoted to each of the duplicate 5.0 mL tubes (Eppendorf Tubes®, Germany) while 50 μL was aliquoted to each of the duplicate 200 μL Polymerase Chain Reaction (PCR ...
-
bioRxiv - Neuroscience 2020Quote: ... in PBS) and pelleted again (500 × g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 500 μL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Neuroscience 2024Quote: ... samples were centrifuged at 4°C for 5 minutes (Eppendorf 5417R Refrigerated Centrifuge) at 16,400 rpm ...
-
bioRxiv - Neuroscience 2024Quote: ... Samples were centrifuged at 4°C for 5 minutes (Eppendorf 5417R Refrigerated Centrifuge) at 16,400 rpm ...
-
bioRxiv - Cell Biology 2021Quote: ... 3-liter Bioflo 110 (Eppendorf) were used ...
-
bioRxiv - Immunology 2021Quote: ... lifted cells were centrifuged at 15,000g for 5 minutes at 4°C (Eppendorf 5430R). Cell pellets were placed at −20°C overnight with 60 μL SDS Lysis buffer (1% SDS ...
-
bioRxiv - Genomics 2019Quote: ... in PBS) and pelleted again (500 x g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 500 µL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Cancer Biology 2019Quote: ... Cells were spun down (5 min, 800 g•, 2 °C, minimal acceleration and break, Eppendorf 5810 R with swing-×bucket rotor A-4-44). The medium was discarded and the cells were dissociated in 15 mL of ice cold ACK solution (0.15 M NH4Cl ...
-
bioRxiv - Genomics 2020Quote: ... 3 ml of each bacterial suspension were centrifuged at 6,000 × g (Eppendorf, Westbury, NY) for 2 mins ...
-
bioRxiv - Neuroscience 2020Quote: ... Microinjection of 300 nl was made over 3 min using a Femtojet injector (~5 psi, Eppendorf), and the exposed cortical surface was covered by a sterilized round cover glass (3 or 4 mm in diameter ...
-
bioRxiv - Biochemistry 2020Quote: ... The solution was centrifuged at ~3220 g for 5 min (Eppendorf #A-4-81 rotor) to pellet down precipitated dyes ...
-
bioRxiv - Neuroscience 2020Quote: ... in PBS) and pelleted again (500 x g, 5 min, 4°C; 5920R, Eppendorf, RRID:SCR_018092). Nuclei were resuspended in 500 µL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Microbiology 2019Quote: ... centrifuged at 3000 × g for 5 min at 4°C (Centrifuge 5424, Eppendorf, Hamburg, Germany), and frozen at −20°C for bacterial DNA extraction ...