Labshake search
Citations for Eppendorf :
2901 - 2950 of 4996 citations since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2021Quote: ... The reaction master mix was added using an X-stream repeating pipette (Eppendorf, Hauppauge, NY) to the microtiter plates ...
-
bioRxiv - Immunology 2021Quote: ... The culture supernatant containing the virus was centrifuged at 4,500 g for 5 min at 4°C (Eppendorf 5810R) and stored at -80°C ...
-
bioRxiv - Immunology 2021Quote: The thawed tubes were mixed at maximum speed on a thermomixer (Eppendorf 5382000023) set to 4C for 15min ...
-
bioRxiv - Immunology 2021Quote: ... These plates were spun at 100G for 1min at 4C in a centrifuge (Eppendorf 022623508) to allow settling of cells to the bottom of the wells ...
-
bioRxiv - Immunology 2021Quote: ... 300μL of 0.1M NaOH was added to each tube containing an organoid pellet and was mixed thoroughly followed by max speed incubation for 15min at 4C on a Thermomixer (Eppendorf). These tubes were then centrifuged at 300G for 5min at 4C and the supernatants were used for protein quantification using the DC protein quantification assay protocol (Bio-rad 5000112) ...
-
bioRxiv - Immunology 2021Quote: ... The samples were randomised and plated in a 96-well plate (Eppendorf). The protocol used for protein/peptide extraction and proteomics analysis has been described in detail in Messner et al. ...
-
bioRxiv - Immunology 2021Quote: ... the collected peptide material was dried by a vacuum concentrator (Eppendorf Concentrator Plus) and redissolved in 50μl 0.1% v/v FA ...
-
bioRxiv - Immunology 2021Quote: ... samples were transferred onto a pre-chilled 96-well plate (Eppendorf), heat sealed and incubated overnight in a Veriti 96-well thermocycler (Thermo Fisher) ...
-
bioRxiv - Molecular Biology 2021Quote: ... The samples were incubated on ice for 10 minutes and then at 37°C for 10 minutes at 700 rpm shaking on a Thermomixer (Eppendorf). Lysates were cleared by centrifugation at 15,000 g for 2 minutes ...
-
bioRxiv - Molecular Biology 2021Quote: ... 3′-desthiobiotin labelled RNAs were incubated with magnetic streptaividin-coated beads (50 μL of slurry for each RNA probe) for 30 min at room temperature under agitation (600 RPM in a ThermoMixer, Eppendorf). 200 μg of cell lysates (in Pierce IP lysis buffer ...
-
bioRxiv - Biophysics 2021Quote: ... using Centrifuge 5417R (Eppendorf, Hamburg, Germany). As controls ...
-
bioRxiv - Developmental Biology 2021Quote: ... and the DNA solution was injected into the ventral hemisphere using a Femtojet Express pressure injector (Eppendorf, cat. #920010521) with the following setting ...
-
bioRxiv - Genomics 2021Quote: ... The strained sample was transferred into two LoBind 1.5 mL Eppendorf tubes (Cat # 022431021, Eppendorf) on ice ...
-
bioRxiv - Genetics 2021Quote: ... 40 μL of sample was manually transferred to a 96-well plate (Eppendorf, Hamburg, Germany). Amplification was performed (40 cycles of amplification ...
-
bioRxiv - Genetics 2021Quote: Transgenic flies carrying P{w+mCUASp-Tcp-1η-Myc} were generated using FemtoJet Microinjector (Eppendorf) following standard protocol (54) ...
-
bioRxiv - Genetics 2021Quote: ... Samples were incubated in a Thermomixer C (Eppendorf) for 30 min at 65°C shaking at 1400 RPM then spun at max speed for 10 min at 4°C ...
-
bioRxiv - Immunology 2021Quote: ... TLR4KO and DKO cell lines were grown overnight on glass-bottom cell imaging dishes (Eppendorf) and then incubated for 30 min at 37°C in the presence of 5%CO2 with LAV or A11 or AΔ11 (2μg/ml ...
-
bioRxiv - Genomics 2021Quote: ... transferred to a 1.5 mL LoBind tube (Eppendorf) and cleaned up with a 0.8:1 SeraMag SpeadBeads™ containing 18% w/v Polyethylene glycol MW=8000 ...
-
bioRxiv - Genomics 2021Quote: ... Nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Genomics 2021Quote: ... immediately transferred to a Mastercycler thermocycler (Eppendorf), incubated either for 3 min at 72°C or for 3 min at 95°C ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... volume was reduced to 5 μL in a Speedvac concentrator (Eppendorf) and sequencing libraries were prepared using the TruSeq Small RNA Library Prep Kit (Illumina) ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... LoRetention tips (Eppendorf) were used during all steps ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... Protein LoBind tubes (Eppendorf) and epT.I.P.S ...
-
bioRxiv - Genomics 2021Quote: ... 0.6 mM DTT) and pelleted with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). Pulverized frozen tissue and pelleted nuclei from gentleMACS M-tubes were each split into two further aliquots ...
-
bioRxiv - Genomics 2021Quote: ... nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Biophysics 2021Quote: ... The bicelle mixture (~1 mL) was centrifuged (13,400 rpm, Eppendorf F45-12-11 rotor, 4°C, 30 sec) to remove insoluble debris and the supernatant concentrated to ~200 μL using a 0.5 mL 10 kDa MWCO centrifugal filter (Amicon ...
-
bioRxiv - Cell Biology 2021Quote: ... in DNA LoBind tubes (Eppendorf) using Hyclone water ...
-
bioRxiv - Cell Biology 2021Quote: ... Cell lysate was spun down at 13600 rpm for 10 minutes at 4°C on a table-top microcentrifuge (Eppendorf, Hamburg, Germany). 1 μl was used to determine protein concentration using Bradford dye at 595 nm wavelength ...
-
bioRxiv - Immunology 2021Quote: ... Samples were mixed in protein LoBind tubes (Eppendorf, 022431064) and then immediately transferred onto 18-well glass-bottom chamber slides (iBidi ...
-
bioRxiv - Immunology 2021Quote: ... The micropipette equipment was mounted on a motorized micromanipulator (Eppendorf, Transferman Nk2). Both systems were controlled by Dikeria software ...
-
bioRxiv - Genomics 2021Quote: ... The Eppendorf tubes containing minced tissues were then placed in a thermomixer (Eppendorf) and incubated for 25 minutes at 300 RPM ...
-
bioRxiv - Genomics 2021Quote: ... Colonies less than 3000 cells but greater than 200 cells in size were harvested into 96 well skirted Lo Bind plates (Eppendorf) and centrifuged (800g/5min) ...
-
bioRxiv - Genomics 2021Quote: ... live cell was index-sorted into one 96-well quadrant of a 384-well plate (Eppendorf lo-bind twin-tec) containing a mixture of DPBS and shearing master mix at a final volume of 2.14 μL using a MoFlo Astrios cell sorter running Summit v6.3 (Beckman Coulter) ...
-
bioRxiv - Immunology 2021Quote: ... The 80 µL aliquot was lyophilised for 4 h at 30 °C with the aid of a vacuum concentrator (Eppendorf Concentrator 5301) attached to a refrigerated condensation trap (Savant) ...
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Immunology 2021Quote: ... lifted cells were centrifuged at 15,000g for 5 minutes at 4°C (Eppendorf 5430R). Cell pellets were placed at −20°C overnight with 60 μL SDS Lysis buffer (1% SDS ...
-
bioRxiv - Biochemistry 2021Quote: ... β-chitin aliquots from the culture flasks were transferred to 2 mL Safe-Lock Eppendorf tubes (Eppendorf, Hamburg, Germany) and boiled directly for 5 min in 30 µL NuPAGE LDS sample buffer and NuPAGE sample reducing agent (Invitrogen™ ...
-
bioRxiv - Microbiology 2021Quote: ... and PCR was performed on the Mastercycler Pro (Eppendorf, Wesseling-Berzdorf, Germany) with the following settings ...
-
bioRxiv - Microbiology 2021Quote: ... The cells were incubated with the dye and shaken for 20 minutes at room temperature in the dark, then washed by centrifugation (3 min, 8000 RPM, 28 °C (Eppendorf 5430R)) and resuspension in M2G three times ...
-
bioRxiv - Microbiology 2021Quote: ... A two-step PCR-reaction was performed on a Mastercycler Pro instrument (Eppendorf, Wesseling-Berzdorf, Germany) with the following settings ...
-
bioRxiv - Neuroscience 2021Quote: ... 1 × Denhardt’s solution (Eppendorf, 0032007.155). Hybridization was performed with a double DIG-labeled locked nucleic acid (LNA ...
-
INTEGRATE: Model-based multi-omics data integration to characterize multi-level metabolic regulationbioRxiv - Systems Biology 2021Quote: ... The supernatant was collected in a glass insert and evaporated in a centrifugal vacuum concentrator (Concentrator plus/ Vacufuge® plus, Eppendorf) at 30 °C for about 2.5 h ...
-
bioRxiv - Systems Biology 2021Quote: ... The six 96-well master plates were then re-arrayed into the final 384 well v-bottom PCR Plates (Eppendorf #951020702).
-
bioRxiv - Systems Biology 2021Quote: ... In brief: crude cell lysates were transferred from source plates to 384 well v-bottom PCR Plates (Eppendorf #951020702) assay plates ...
-
bioRxiv - Systems Biology 2021Quote: Cells were seeded into wells of a 24-well glass-bottom plate (Eppendorf) ~12 hours prior to imaging ...
-
bioRxiv - Systems Biology 2021Quote: ... Cells were seeded on poly-L-lysine pretreated (0.001%, 1h) 24-well imaging plates (Eppendorf, Germany) at a density of 1e05 cells/well ...
-
bioRxiv - Microbiology 2021Quote: ... PCR was performed in a thermocycler (Eppendorf, Germany) under the following thermal cycling conditions ...
-
bioRxiv - Biochemistry 2021Quote: HEK293T cells were seeded into imaging dishes (Eppendorf; 0030740009) and transfected with spike display plasmids ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were maintained in a humidified atmosphere of 5% CO2 and 37 °C and were passaged every 2-3 days into 10 cm polystyrene coated plates (Eppendorf; EP0030700112-300EA) upon reaching high density ...
-
bioRxiv - Biochemistry 2021Quote: ... cells were seeded into 6-well or 12-well polystyrene coated plates (Eppendorf; EP0030720130, EP0030721012) at a density of 0.3 x 106 cells mL−1 or 0.1 x 106 cells mL−1 ...