Labshake search
Citations for Eppendorf :
1751 - 1800 of 4996 citations since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2023Quote: ... Peptides were eluted in 40 μL of 80% acetonitrile in 0.1% TFA and concentrated down to 1 μL by vacuum centrifugation (Concentrator 5301, Eppendorf, UK). The peptide sample was then prepared for LC-MS/MS analysis by diluting it to 5 μL by 0.1% TFA.
-
bioRxiv - Cell Biology 2023Quote: ... qRT-PCR was performed on an EP Real-Plex MasterCycler (Eppendorf) using a QuantiFast SYBR Green PCR kit (QIAGEN) ...
-
bioRxiv - Cell Biology 2023Quote: ... The micromanipulator (Eppendorf InjectMan NI 2) was positioned and microinjection was performed using microinjector (Eppendorf FemtoJet ...
-
bioRxiv - Developmental Biology 2023Quote: ... combined with 3 μg/μL NeuroD:Cre-IRES-GFP construct and 1 μg/μL NeuroD:IRES-GFP vector using a micro injector (Eppendorf Femto Jet). Plasmids were further electroporated into the neuronal progenitors adjacent to the ventricle by discharging five electric pulses (35 V ...
-
bioRxiv - Cell Biology 2023Quote: ... and eluted in 40 μL of 80% acetonitrile in 0.1% TFA and concentrated down to 1 μL by vacuum centrifugation (Concentrator 5301, Eppendorf, UK). They were then prepared for LC-MS3 analysis by diluting it to 5 μL by 0.1% TFA ...
-
bioRxiv - Cell Biology 2023Quote: ... The incubated sample was centrifuged at 20,800 g for 15 min at 4 °C (Rotor F45-30-11, Eppendorf), and the resulting supernatant was analyzed by immunoblotting using various antibodies ...
-
bioRxiv - Cell Biology 2023Quote: ... fractions numbered from 9 to 22 were processed by centrifugation (20,800 g for 30 min at 4 °C, Rotor F45-30-11, Eppendorf), and the resulting pellet was further resuspended in 160 μL of alkaline carbonate buffer (100 mM Na2CO3 ...
-
bioRxiv - Developmental Biology 2023Quote: ... 15 mg of protein were transferred into a new 5 ml LoBind tubes (Eppendorf) and mixed with 200 µl Dynabeads MyOne Streptavidin C1 (Invirtogen ...
-
bioRxiv - Developmental Biology 2023Quote: ... The oocyte and fibroblast resulting from the manipulation were fused in a fusion chamber (Eppendorf) filled with a fusion solution (0.28 M mannitol ...
-
bioRxiv - Developmental Biology 2023Quote: ... The 1st PB along adjacent cytoplasm was removed by gentle aspiration using a glass pipette with 15μm of internal diameter (ES transferTip; Eppendorf, Hamburg, Germany). Before aspiration the oocytes were quickly exposed under UV filter (440 nm) ...
-
bioRxiv - Developmental Biology 2023Quote: ... microinjector with Femtotip II microinjection capillary tips (Eppendorf, Cat# 930000043) at 100 hPa pressure for 0.2 seconds ...
-
bioRxiv - Developmental Biology 2023Quote: ... The injection needle (Eppendorf, Cat# 930001091) was washed in NIM 0.1% PVA proceeding and between injections ...
-
bioRxiv - Developmental Biology 2023Quote: ... RNA injections were carried out using a Femtojet (Eppendorf) microinjector with Femtotip II microinjection capillary tips (Eppendorf ...
-
bioRxiv - Developmental Biology 2023Quote: ... About 6 pl dCas9-KRAB mRNA and sgRNA mixes were injected into cytoplasm of zygotes between 2-4 hpi using a Piezo impact-driven micromanipulator (Eppendorf). For all micro-injection experiments ...
-
bioRxiv - Biophysics 2023Quote: ... was dried under nitrogen followed by 1 hour in vacuum (Rotovap;Eppendorf), then rehydrated overnight using PBS (pH = 7.4) ...
-
bioRxiv - Biochemistry 2023Quote: ... The samples were incubated in a ThermoMixer (Eppendorf, Hamburg, Germany) at 30 °C for 1 h ...
-
bioRxiv - Biochemistry 2023Quote: ... The samples were incubated in a ThermoMixer (Eppendorf, Hamburg, Germany) for 1 h at 30° ...
-
bioRxiv - Bioengineering 2023Quote: ... Pressure for microinjection was provided by Eppendorf FemtoJet 4i ...
-
bioRxiv - Biochemistry 2023Quote: ... with sorting into different low-binding tubes (Eppendorf) containing 100 µL nuclease-free water according to aptamer fluorescent intensity ...
-
bioRxiv - Biochemistry 2023Quote: ... The elution fraction was then concentrated using an amicon of 30 kDa MWCO (Eppendorf 5804R, ∼3000g) at 4°C ...
-
bioRxiv - Biochemistry 2023Quote: ... RYBP fractions of interest were pooled after the heparin column and concentrated using an amicon of 10 kDa MWCO (Eppendorf 5804R, ∼3000g) at 4°C ...
-
bioRxiv - Biochemistry 2023Quote: ... Protein fractions of interest were pooled and concentrated using an amicon of 10 kDa MWCO (Eppendorf 5804R, ∼3000g), before being loaded onto a size exclusion Superdex 75 HiLoad 16/600pg column (GE-Healthcare) ...
-
bioRxiv - Biochemistry 2023Quote: ... followed by overnight digestion in ThermoMixer (Eppendorf) at 37°C and 500 rpm ...
-
bioRxiv - Biochemistry 2023Quote: ... concentrated in a SpeedVac (Eppendorf), and reconstituted into buffer A (2% acetonitrile ...
-
bioRxiv - Biochemistry 2023Quote: ... Following incubation in ThermoMixer (Eppendorf) at 37°C and 300 rpm for 30 minutes ...
-
bioRxiv - Bioengineering 2023Quote: ... Fluorescence measurements were taken at day 1 (when the PCL-TMA scaffolds were removed from the Eppendorf tube after 24 hours of cell seeding) and on day 14 (each PCL-TMA scaffold was moved to a new 24 well plate to ensure only the cells adhered to the scaffold were quantified) ...
-
bioRxiv - Biochemistry 2023Quote: ... Cells were washed in 20 mL of chilled phosphate-buffered saline (1X PBS, pH 7.4), and centrifuged (1500 ×g, 4 °C, 15 min) using the Centrifuge 5810R (Eppendorf). The cell pellet was subsequently resuspended in 30 mL of ice-cold RSB hypo buffer (10 mM NaCl ...
-
bioRxiv - Bioengineering 2023Quote: ... Each 60 mm plate (Eppendorf cat #0030701011) contained 75:25 SC:M9 with appropriate bacterial antibiotics for plasmid maintenance ...
-
bioRxiv - Cancer Biology 2023Quote: ... using a micromanipulator (Narishige) and the oil manual microinjector (Cell Tram Vario Eppendorf). Before xenografting ...
-
bioRxiv - Biochemistry 2023Quote: ... previously spun down (Eppendorf 5427R, FA-45-30-11, 18000g, 10min), was manually injected onto a Superdex 200 increase 5/150 GL column (GE Healthcare) ...
-
bioRxiv - Bioengineering 2023Quote: ... the mixture was pipetted using 200 μL micropipette (Eppendorf) for about 3 mins to generate dropicles (∼120 pipetting strokes) ...
-
bioRxiv - Biophysics 2023Quote: ... The injection system used is Femtojet 4i (Eppendorf) with a micromanipulator InjectMan 4 (Eppendorf) ...
-
bioRxiv - Biochemistry 2023Quote: ... Extracted peptides were dried down in a vacuum concentrator (Eppendorf, Hamburg, Germany) and resuspended in 0.1% TFA for LC-MS/MS analysis ...
-
bioRxiv - Biophysics 2023Quote: ... The solution was shaken on a thermomixer (Eppendorf Ltd, UK) at 800 rpm for 30 min at 30°C ...
-
bioRxiv - Cell Biology 2023Quote: Matrigel diluted 1:100 v/v in ice-cold PBS was dispensed into 96-well plates (Eppendorf Cell Imaging plate ...
-
bioRxiv - Molecular Biology 2023Quote: ... The mixture was sonicated 3 times for 1 minute in a waterbath sonicator and incubated in a ThermoMixer (Eppendorf) for 30 minutes at 37°C and 500 rpm ...
-
bioRxiv - Cell Biology 2023Quote: ... The supernatant was transferred into a new sample tube and dried with a vacufuge (Eppendorf, Hauppauge, NY). Pellets were resuspended in 100 µl methanol/water (1:1 ...
-
bioRxiv - Molecular Biology 2023Quote: 10xGenomic single cell 3′ library was prepared as follows: single cells were sorted into 1.5 mL tubes (Eppendorf) and counted under the microscope ...
-
bioRxiv - Cancer Biology 2023Quote: ... was placed on an Eppendorf ThermoMixer C (Eppendorf, Enfield CT, USA) and incubated at 21°C for 2 hours ...
-
bioRxiv - Biochemistry 2023Quote: ... The eluted material was aliquoted into 3 samples in low binding polypropypene tubes (nominally 1.5 mL) and dried in a vacuum concentrator (Vacufuge® plus; Eppendorf™) at room temperature without additional heating for about 3h ...
-
bioRxiv - Cell Biology 2023Quote: ... Lysis was performed in low-bind microfuge tubes (Eppendorf). Insoluble material was removed by centrifugation at 14,000 x g for 2 minutes and the supernatant was incubated with 50 µl HNG-washed agarose beads (Chromotek ...
-
bioRxiv - Biophysics 2023Quote: ... Cell growth was quantified at intervals by measuring their optical density at regular intervals (as mentioned in Figure 3) using a Biophotometer® D30 (Eppendorf, Germany). The morphology of cells at different growth stages was determined by a variety of microscopic techniques (as described in the below sections).
-
bioRxiv - Microbiology 2023Quote: ... was added and incubated in a ThermoMixer (Eppendorf) for 90 min at 30 °C and 1400 rpm ...
-
bioRxiv - Biochemistry 2023Quote: ... followed by centrifugation at 20,000 gmax for 10 min at 4 °C (Centrifuge 5810 R, Eppendorf)73–75 to separate mitoplasts (pellet ...
-
bioRxiv - Biophysics 2023Quote: ... 2 mL of culture was then collected and centrifuged (10,000g Eppendorf 5424) and the supernatant medium aspirated away ...
-
bioRxiv - Biophysics 2023Quote: ... The needles were filled with the protein sample using microcapillaries (Eppendorf). Then the needles were fitted into the microinjector nozzle ...
-
bioRxiv - Bioengineering 2023Quote: ... The transposon DNA was microinjected under a microscope equipped with a micromanipulator and Femtojet (Eppendorf, Hamburg, Germany). The injected one-cell embryos were cultured in KSOM medium until the two-cell stage and then transferred into pseudopregnant ICR mice.
-
bioRxiv - Bioengineering 2023Quote: ... The centrifuge was of tissue culture-grade (5810R Eppendorf). The spheroids were mechanically loaded (and as we shall show later ...
-
bioRxiv - Bioengineering 2023Quote: ... the nanoparticles were collected via centrifugation at 12000 rpm (13523 x g) for 5 min (Centrifuge 5420, Eppendorf), and then washed with acetone and distilled water 3 times ...
-
bioRxiv - Bioengineering 2023Quote: ... and centrifuged at 8000 rpm for 5 min (Centrifuge 5430, Eppendorf), where the dissociated monomers or oligomers were separated and mainly located in the supernatant ...