Labshake search
Citations for Corning :
1 - 50 of 135 citations for Vertical Gel Casting Cassettes since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genomics 2022Quote: Horizontal and vertical xDbit chips were manufactured by casting a 5 mm PDMS (Sylgard® 184, Dow Corning, MI, USA) layer (ratio 10:1 of base material to curing agent ...
-
bioRxiv - Microbiology 2023Quote: The microfluidic devices were fabricated by casting PDMS (Sylgard 184 kit; Dow Corning) on a master wafer ...
-
Unique Cancer Motility Behaviors in Confined Spaces of Microgroove Topography with Acute Wall AnglesbioRxiv - Cancer Biology 2019Quote: ... and 120 degrees) were fabricated by casting polydimethylsiloxane (PDMS; Silpot 184 W/C; Dow Corning) onto the custom-made Ni-based mold ...
-
bioRxiv - Neuroscience 2023Quote: ... Devices were formed by casting polydimethylsiloxane pre-polymer (PDMS Sylgard 184, Dow Corning, Corning, NY) against masters ...
-
bioRxiv - Neuroscience 2023Quote: ... Devices were formed by casting polydimethylsiloxane pre-polymer (PDMS Sylgard 184, Dow Corning, Corning, NY) against masters ...
-
bioRxiv - Microbiology 2023Quote: ... chemotaxis devices were made by casting solubilized 10:1 polydimethylsiloxane (PDMS Slygard 184, Dow Corning) in a small glass pot (d = 50 mm ...
-
bioRxiv - Biophysics 2020Quote: ... Polydimethylsiloxane elastomer (PDMS) castings of the master mold were made using SYLGARD 184 silicone elastomer (Dow Corning) and prepared and cured according to manufacturer’s recommended instructions ...
-
bioRxiv - Cell Biology 2019Quote: The microfluidic devices were fabricated on silicone molds casting silicone elastomer polydimethylsiloxane (PDMS, SYLGARD 184®, Dow Corning). Each device consists of 2 aligned PDMS layers ...
-
bioRxiv - Cell Biology 2022Quote: ... poly(dimethylsiloxane) (PDMS) stamps were fabricated by casting PDMS precursors (Sylgard 184 Silicone Elastomer, Dow Corning Corp., Midland, MI) on silicon wafers with 300 µm diameter microwells ...
-
bioRxiv - Bioengineering 2020Quote: ... Polydimethylsiloxane (PDMS) wells were created to cast the tissue around the strip by casting Sylgard 184 PDMS (Dow Corning) in a 10:1 base to curing agent ratio ...
-
bioRxiv - Bioengineering 2022Quote: ... Pre-molds were fabricated by casting polydimethylsiloxane (PDMS/ 1:10 ratio) (Sylgard®184 Silicone Elastomer Kit, Down Corning) from a computer numerical control (CNC ...
-
bioRxiv - Bioengineering 2023Quote: ... a SU8 master mold was prepared and the microdevice was created by casting polydimethylsiloxane (PDMS; Dow Corning, Midland, MI) on the SU-8 master mold ...
-
bioRxiv - Cell Biology 2022Quote: ... Cassettes were dialyzed 3 times consecutively with the volume in the cassette to the naïve media (IMDM, Corning 10-016) being 1:1000 ...
-
bioRxiv - Biophysics 2019Quote: ... Microfluidic chips were created by casting a degassed 10:1 mix of polydimethylsiloxane (PDMS) and curing agent (Sylgard 184 kit; Dow Corning) on the master wafer ...
-
bioRxiv - Biophysics 2020Quote: ... Flat PDMS microstamps were prepared by casting a 10:1 (w/w) degassed mixture of PDMS prepolymer and curing agent (Sylgard 184, Dow Corning) on an engraved silicon master ...
-
bioRxiv - Cell Biology 2019Quote: Replicas of silicon molds containing the different features (750nm in height) was made by double-casting PDMS (mixed at 10:1 base and curing agent, Sylgard184, Dow Corning) cured at 80°C for 3 hours ...
-
bioRxiv - Bioengineering 2023Quote: All the parts of the platform except the nanofibrous membrane were made by casting the mixture of PDMS (Sylgard 184, Dow Corning) resin and curing agent at a 10:1.05 ratio (w/w ...
-
bioRxiv - Bioengineering 2021Quote: PDMS replicas of the device were made by casting a previously degassed mixture of the PDMS oligomer and crosslinking agent (Sylgard®184, Dow Corning Inc, Midland, MI) in a 10:1 (w/w ...
-
bioRxiv - Biophysics 2023Quote: PDMS replicas of the device were made by carefully casting a previously degassed (during 30 min) mixture of the PDMS oligomer and crosslinking agent (Sylgard® 184, Dow Corning Inc. Midland, MI) in a 10:1 (w/w ...
-
bioRxiv - Microbiology 2023Quote: ... Gels were visualized under Axygen® Gel Documentation Systems (Corning).
-
bioRxiv - Molecular Biology 2023Quote: ... 1 × 105 LX-2 cells were seeded in the top chamber of an 8 μm pore migration cassette (Corning, Kaiserslautern, Germany) and were allowed to migrate for 4,5 h ...
-
bioRxiv - Neuroscience 2023Quote: ... The craniotomy was protected with transparent dura-gel (Dow Corning 3-4680 Silicone Gel), with a further 3-D printed protective cap sitting on top of the recording chamber ...
-
bioRxiv - Cancer Biology 2020Quote: ... or collagen gels (354249, Corning) were loaded to the corresponding channels and polymerized at 37°C and 5% CO2 for 30 min ...
-
bioRxiv - Cancer Biology 2021Quote: ... except Matrigel gel (Corning, 356234) was added to coat the bottom of the upper chamber at a concentration of 1:40 ...
-
bioRxiv - Genomics 2021Quote: ... Phase lock gel (Dow Corning(R) High Vacuum Grease ...
-
bioRxiv - Cancer Biology 2022Quote: ... 1.6 mg/ml collagen gel (Corning) supplemented with 10 µg/ml fibronectin (Merck ...
-
bioRxiv - Bioengineering 2022Quote: ... Type I collagen gel (Corning Inc.) isolated from rat tail was introduced into the central ECM compartment and polymerized at 37 °C in a humidified incubator overnight prior to cell seeding ...
-
bioRxiv - Plant Biology 2021Quote: ... Gels were visualized under UV light using an Axygen® Gel Documentation System (Axygen, Corning, NY, US).
-
bioRxiv - Bioengineering 2020Quote: Analysis of gel morphology was assessed using 200 uL fibrin gels in a 48-well tissue culture plate (Corning). After gelation ...
-
bioRxiv - Biophysics 2022Quote: Soft gel substrates were prepared using the DOWSILTM CY 52-276 A&B gel formulation (Dow Corning, ratio 1:1) according to the manufacturer’s specifications ...
-
bioRxiv - Synthetic Biology 2019Quote: ... All fragments obtained by polymerase chain reaction were gel-purified using a DNA Gel Extraction kit (Axygen, Corning, NY, USA) according to manufacturer’s instructions ...
-
bioRxiv - Cell Biology 2022Quote: ... gels were stained with Calcein AM (Corning, USA,) to quantify covered area using fluorescence microscopy (BZ-X700 ...
-
bioRxiv - Cancer Biology 2019Quote: ... a reconstituted basement membrane gel (Corning, Tewksbury, MA) and placed between the upper and lower well plates of a blind-well Boyden chemotaxis chamber ...
-
bioRxiv - Microbiology 2023Quote: ... scanned by Axygen Gel Documentation System (Corning, GD1000), and quantified by ImageJ ...
-
bioRxiv - Bioengineering 2024Quote: ... Collagen gel (Rat Tail, Type I, CLS354249, Corning) was prepared with 1:1 volume ratio of the original collagen stock (∼10 mg/mL ...
-
bioRxiv - Cell Biology 2020Quote: ... a thin gel of growth factor-reduced Matrigel (Corning), or type I collagen reconstituted from rat tail tendons as described (27) ...
-
bioRxiv - Cell Biology 2022Quote: ... gel containing 3,77 g/L collagen I (Corning, USA), 10 % M199 medium (Sigma Aldrich) ...
-
bioRxiv - Neuroscience 2020Quote: ... Gel pieces were removed with filter tubes (Corning 8160), and RNA was precipitated before being reverse transcribed with SSIII (Invitrogen 18080-044 ...
-
bioRxiv - Neuroscience 2020Quote: ... a drop of silicone gel (3-4680, Dow Corning) was applied over the craniotomy after the electrode was in the tissue ...
-
bioRxiv - Bioengineering 2022Quote: A silicone gel phantom made of polydimethylsiloxane (PDMS) (Dow Corning) was prepared using a 1:2 mix ratio of Sylgard 527 and was cut in a 3×3×2 cm3 cuboid ...
-
bioRxiv - Neuroscience 2019Quote: ... a drop of silicone gel (3-4680, Dow Corning, Midland, MI) was applied over the craniotomy after the electrode was in position ...
-
bioRxiv - Cell Biology 2019Quote: Collagen gels were prepared by mixing Rat tail collagen 1 (Corning) with collagen polymerizing reagents to a final concentration of 2mg/ml ...
-
bioRxiv - Molecular Biology 2021Quote: ... The gels pieces were removed using Spin-X columns (Corning 8160), and RNAs were precipitated with isopropanol and resuspended in water for downstream reactions.
-
bioRxiv - Cell Biology 2023Quote: ... a thin plastic gel-loading tip (Corning, New York, United States), was used as a catheter to collect a spermic urine sample ...
-
bioRxiv - Biochemistry 2023Quote: ... The gel debris was removed using a Spin-X column (Corning), followed by ethanol precipitation ...
-
bioRxiv - Neuroscience 2023Quote: ... a drop of silicone gel (3-4680, Dow Corning, Midland, MI) was applied over the craniotomy after the electrode was in the tissue ...
-
bioRxiv - Biochemistry 2023Quote: ... PAA gels were prepared onto 75×50 mm microscope slides (Corning) according to previously described protocol (56).
-
bioRxiv - Molecular Biology 2023Quote: ... The gel pieces were removed using Spin-X columns (Corning, 8160). DNAs were then precipitated with isopropanol and resuspended in water for downstream Klenow extension with oligo KXU237 in the same way as F3 in the N60-PASmos library.
-
bioRxiv - Molecular Biology 2023Quote: ... The gel pieces were removed using Spin-X columns (Corning 8160), and RNAs were precipitated with isopropanol and resuspended in water for downstream reactions.
-
bioRxiv - Cell Biology 2019Quote: HUVEC tube formation on rat tail collagen I gels (Corning, Amsterdam, Netherlands) was prepared according to the protocol for tube formation assays on Matrigel ...