Labshake search
Citations for Beckman :
1 - 50 of 1535 citations for DnaJ Hsp40 Homolog Subfamily C Member 10 DNAJC10 Antibody since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2022Quote: ... for 45 min at 10°C (45Ti/Beckman Coulter). The pellet was re-dissolved in lysis buffer ...
-
bioRxiv - Biophysics 2021Quote: ... centrifuged (Beckman Avanti, 1500 x g, 10 min, 4 °C) and pellets were flash-frozen and stored at −80 °C.
-
bioRxiv - Biophysics 2019Quote: ... 4 °C for 10 min using TLA-100 rotor (Beckman-Coulter). Tubulin in the supernatant was polymerized by incubating in the dark at 37 °C for 20 min ...
-
bioRxiv - Cell Biology 2021Quote: ... for 10 minutes at 30°C in a TLA100 rotor (Beckman) through a 125 ul 40% glycerol cushion prepared from BRB90 buffer supplemented with 1 mM GTP ...
-
bioRxiv - Biochemistry 2020Quote: ... the supernatant was mixed with GMPCPP-seeds from the prior step and then incubated at 37°C for 30 mins followed by centrifugation at 90,000 rpm for 10 min at 37°C (TLA120.1 Beckman Coulter). The microtubule pellets were rinsed twice with 100 μ! warm (37°C ...
-
bioRxiv - Immunology 2022Quote: ... for 30 min at 37°C and for 10 min at 80°C followed by a 1.2X AMPure XP beads (Beckman Coulter) cleanup ...
-
bioRxiv - Cell Biology 2020Quote: ... The sample was centrifuged at 14,000 g for 10 min at 10°C and then loaded in an Optima analytical centrifuge (Beckman) in an An-50Ti rotor pre-equilibrated at 20°C ...
-
bioRxiv - Biochemistry 2020Quote: ... centrifuged at 90,000 rpm for 10 min at 4°C (TLA120.1 Beckman Coulter), and then polymerized by incubation at 37°C for 30 mins ...
-
bioRxiv - Biophysics 2023Quote: ... alternated by centrifugation at 10°C and 6500 rpm (Beckman Coulter JLA 16.250). Enumeration of bacteria in the suspension was quantified with a Bürker-Türk counting chamber.
-
bioRxiv - Synthetic Biology 2019Quote: ... then centrifuged at 5000 x g and 10°C for 10 minutes (Avanti□ J-E Centrifuge, Beckman Coulter, Indianapolis, IN). After disposing the supernatant ...
-
bioRxiv - Developmental Biology 2023Quote: ... The top 1 mL was loaded onto a 52% isotonic Percoll solution and centrifuged at 27,000 × g for 10 min at 10°C (Optima-XPN-80, Beckman Coulter). Following centrifugation ...
-
bioRxiv - Cell Biology 2020Quote: ... followed by serial centrifugation at 100’000 g for 120 min at 10 °C (Beckman fixed-angle TL110 rotor ...
-
bioRxiv - Microbiology 2020Quote: ... the VLPs were concentrated by ultracentrifugation (40,000 rpm, 2h, 10°C, Beckman SW41 rotor), resuspended in buffer A and observed by TEM ...
-
bioRxiv - Biochemistry 2020Quote: ... and spun at 90,000 rpm for 10 min at 4°C (TLA120.1 Beckman Coulter). After incubation at 37°C for 2 mins ...
-
bioRxiv - Immunology 2020Quote: ... Whole milk was centrifuged at 22°C for 10 minutes at 3,000 g (Beckman Coulter Allegra X-12R ...
-
bioRxiv - Bioengineering 2022Quote: ... samples (10 mL) were first centrifuged at 7000Xg at 4°C for 30 minutes (Beckman Coulter Avanti J-E Series ...
-
bioRxiv - Immunology 2023Quote: ... at 950 rpm for 10 min at 20°C and centrifuged at 15,000 rpm (Beckman Coulter Microfuge® 22R refrigerated microcentrifuge ...
-
bioRxiv - Neuroscience 2021Quote: ... The homogenate was centrifuged at 1,800 rpm for 10 min at 4°C (Beckman F0630 rotor) obtaining a supernatant (S1 ...
-
bioRxiv - Biochemistry 2020Quote: ... The microtubules were pelleted at 90,000 rpm for 10 min at 37°C (TLA120.1 Beckman Coulter) and re-suspended in warm (37°C ...
-
bioRxiv - Biochemistry 2022Quote: ... Polymerised MTs were pelleted at 313,000g for 10 min at 25°C using TLA100 rotor (Beckman Coulter), and the pellet was washed with BRB80 buffer ...
-
bioRxiv - Biophysics 2020Quote: ... Cells were collected by centrifuging for 10 min at 4 °C at 4,000g (JLA-9.1000, Beckman Coulter). The bacterial pellet was resuspended in 50 mM Tris-HCl pH 8.0 ...
-
bioRxiv - Biophysics 2019Quote: ... transferred to 50 ml polypropylene tubes and centrifuged for 10 minutes at 22°C at 3000 xg (Beckman Coulter Allegra X-12R ...
-
bioRxiv - Biochemistry 2020Quote: ... before being pelleted in a TLA120.1 rotor at 90,000 rpm for 10 min at 25°C (Beckman Coulter) (Subramanian et al. ...
-
bioRxiv - Microbiology 2020Quote: ... Then 4 ml of the adjusted lipoprotein was layered under 8 ml of 0.9% NaCl and centrifuged at 49,000 rpm for 4 hours at 10°C (NVTi 65 rotor; Beckman). The HDL (lower band ...
-
bioRxiv - Biochemistry 2020Quote: ... The polymerized GMPCPP-microtubules were pelleted by 90,000 rpm for 10 min at 37°C (TLA120.1 Beckman Coulter) and suspended in warm (37°C ...
-
bioRxiv - Systems Biology 2023Quote: ... Tubes were spun at 31,000 rpm for 3h at 10°C in an SW41 rotor (Beckman Coulter ultracentrifuge) and the resulting phage band had a buoyant density of 1.36 g/ml ...
-
bioRxiv - Cell Biology 2023Quote: ... 10% and 6% and ultracentrifuged at 187,000xg for 1:30h at 4°C in Sw32.1Ti rotor (Beckman Coulter). Afterwards ...
-
bioRxiv - Biophysics 2023Quote: ... transferred to 50 ml polypropylene tubes and centrifuged for 10 minutes at 22°C at 3000 xg (Beckman Coulter Allegra X-12R ...
-
bioRxiv - Cell Biology 2023Quote: ... Cells were harvested by two rounds of centrifugation (6,000 rpm, 10 min, 4°C, JLA-9.1000 rotor; Beckman), resuspended in Buffer A containing 50 mM Tris-HCl pH8.0 ...
-
bioRxiv - Microbiology 2022Quote: ... The immunoturbidimetric test was used to assess serum complement (C) and immunoglobulin antibodies (AU5421; Beckman Coulter, USA). Immunoblotting and immunofluorescence were used to detect serum autoantibodies ...
-
bioRxiv - Biochemistry 2020Quote: ... mixed for 10 minutes at 4°C and centrifuged at 25,000 rpm for 45 minutes (Beckman Ti-45 rotor). The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor ...
-
bioRxiv - Cell Biology 2021Quote: ... with or without 5µM Gli for 15 minutes at room temperature in 1x BRB80 supplemented with 0.1 mg/mL BSA and then subjected to sedimentation by ultracentrifugation at 50,000 rpm for 10 minutes at 27°C in a TLA 120.1 rotor (Beckman Coulter). Pellets were subsequently resuspended and the amount of protein in each pellet and supernatant was analyzed by SDS-PAGE ...
-
bioRxiv - Biochemistry 2020Quote: ... Cells were collected by centrifugation (8 000 rpm for 10 min at 4 °C, JLA-16.25 Beckman Coulter rotor), pellets frozen in liquid nitrogen and stored at −80°C ...
-
bioRxiv - Microbiology 2020Quote: ... Supernatant was transferred to a fresh tube and further clarified by centrifugation at 18,000 x g for 10 min at 4°C in a microfuge (Beckman), and supernatant transferred to a fresh tube.
-
bioRxiv - Microbiology 2020Quote: ... Cell lysate was then clarified 200 x g for 10 min at 4°C in an Allegra centrifuge (Beckman). Supernatant was transferred to a fresh tube and further clarified by centrifugation at 18,000 x g for 10 min at 4°C in a microfuge (Beckman) ...
-
bioRxiv - Genetics 2022Quote: ... The lysate was centrifuged at 2000 rpm for 10 min at 4 °C in a JA-20 rotor (Beckman). The supernatant from the previous step was centrifuged in a Beckman Coulter high speed centrifuge equipped with a JA-20 rotor at 6000 rpm for 20 min at 4 °C ...
-
bioRxiv - Biochemistry 2022Quote: ... mixed for 10 minutes at 4°C and centrifuged at 25,000 rpm for 45 minutes (Beckman Ti-45 rotor). The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor ...
-
bioRxiv - Systems Biology 2020Quote: ... the 500xg supernatant from enzymatic digestion of cardiovascular tissues underwent further ultracentrifugation at 10,000xg for 10 minutes at 4°C (Beckman Coulter ...
-
bioRxiv - Biochemistry 2021Quote: ... and 10 mM NH4Cl) and centrifuged for 16 h at 4°C with 18,000 rpm in an SW60Ti rotor (Beckman). Gradients were hand-fractionated and ribosome concentrations were determined by absorbance at 260 nm (A260 ...
-
bioRxiv - Cell Biology 2022Quote: ... milk was prevented from cooling down and was processed within 20 minutes after collection by 2 rounds of centrifugation at 3,000xg for 10 minutes at 23°C (Beckman Coulter Allegra X-12R ...
-
bioRxiv - Neuroscience 2023Quote: ... The pellet was resuspended in 4.5 volumes of ice-cold extraction buffer and re- centrifuged at 11,300 RPM for 10 min at 4°C using a Ti45 rotor (Beckman). The supernatant was filtered through a 70 μm pore size cell-strainer and combined with the first supernatant ...
-
bioRxiv - Neuroscience 2023Quote: ... The homogenate was centrifuged at 11,300 revolutions per minute (RPM) for 10 min at 4°C using a Ti45 rotor (Beckman). The supernatant was filtered through a 70 μm pore size cell-strainer and retained on ice ...
-
bioRxiv - Immunology 2022Quote: ... then samples were centrifuged at 2,700 RPM for 10 minutes at 4°C in a tabletop centrifuge (Beckman Coulter). The supernatant (serum ...
-
bioRxiv - Genomics 2023Quote: ... followed by centrifugation at 31,900 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter). Next ...
-
bioRxiv - Biophysics 2023Quote: ... and the resulting lysate was cleared by centrifugation at 279,288 × g for 10 minutes at 4°C using a tabletop centrifuge unit from Beckman Coulter ...
-
bioRxiv - Microbiology 2020Quote: ... Excess dye was removed by ultracentrifugation of the virus through a 10% sucrose cushion for 2 h at 107,000 × g and 4°C using an SW41 rotor (Beckman Coulter). Labeled virus pellets were resuspended at a viral protein concentration of 1 mg/ml ...
-
bioRxiv - Biophysics 2020Quote: ... The insect cells were harvested after 4 days by centrifugation at 300 g for 10 min at 4 °C in an Avanti J-26S ultracentrifuge (JLA-9.1000 rotor, Beckman Coulter). The cell pellet was resuspended in 5 ml ice-cold phosphate buffered saline (PBS ...
-
bioRxiv - Microbiology 2020Quote: ... sanguinis was grown as described above and centrifuged for 10 minutes at 3,740 x g in an Allegra X-142 centrifuge at 4°C (Beckman-Coulter). The supernatant was discarded and the cells were resuspended in BHI prior to inoculation ...
-
bioRxiv - Cell Biology 2020Quote: ... The insect cells were harvested after 4 days by centrifugation at 300 g for 10 min at 4 °C in an Avanti J-26S ultracentrifuge (JLA-9.1000 rotor, Beckman Coulter). The cell pellet was resuspended in 5 ml ice-cold phosphate buffered saline (PBS ...
-
bioRxiv - Biophysics 2021Quote: ... The experiments were carried out at 10 °C and 43,000 rpm in a XL-I analytical ultracentrifuge (Beckman-Coulter Inc.) equipped with both UV-VIS absorbance and Raleigh interference detection systems ...