Labshake search
Citations for Beckman :
1 - 50 of 1535 citations for 7 Chlorofuro 2 3 c pyridine since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2023Quote: ... Bacteria cultures were collected and discarded by centrifugation for 60 min at 4,000-8,000 x g and the supernatants were subjected to high-speed centrifugation at 11,9000 x g for 2-3 h at 4°C (Beckman Coulter Optima Ultracentrifuge). The pellets containing the OMVs were washed with PBS ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4 °C for 3 h (SW40 Ti rotor, Beckman-Coulter, Germany), the supernatant was discarded ...
-
bioRxiv - Biochemistry 2024Quote: ... 4 °C for 3 h using a SW41 rotor (Beckman Coulter). Sucrose gradients were fractionated using a Piston Gradient Fractionator (Biocomp) ...
-
bioRxiv - Biochemistry 2024Quote: ... 4 °C for 3 h using a SW41 rotor (Beckman Coulter). Sucrose gradients were fractionated using a Piston Gradient Fractionator (Biocomp) ...
-
bioRxiv - Bioengineering 2021Quote: ... or 7-Amino-Actinomycin D (7-AAD, Beckman Coulter, B88526) was added to the cell suspensions ...
-
bioRxiv - Genomics 2020Quote: ... and separated by ultracentrifugation at 4°C for 3 hours (35300 rpm, Beckman, SW41 rotor) through a 5-50% sucrose gradient (40 mM Tris-HCl pH 8.4 ...
-
bioRxiv - Biophysics 2023Quote: ... precipitated by ultracentrifugation (35,000 rpm for 3 h at 4 ° C, Beckman-Coulter L90K, USA), and then redissolved in TNE/5 buffer.
-
bioRxiv - Biophysics 2020Quote: ... After centrifugation at 30,000 rpm (4 ° C for 3 h) in the SW45Ti rotor (Beckman Instruments), eight 1.5-ml fractions were collected from the top of a gradient ...
-
bioRxiv - Biochemistry 2020Quote: ... Gradients were resolved at 36,000 rpm for 3 hours at 4 °C in SW41 rotor (Beckman). Both separation and fractionation of gradients used a Biocomp Gradient Station (BioComp Instruments ...
-
bioRxiv - Biochemistry 2020Quote: ... subjected to centrifugation (36,000 rpm for 3 hours at 4 °C, SW-41Ti Beckman Coulter rotor) and analysed using Biocomp Gradient Station (BioComp Instruments ...
-
bioRxiv - Cell Biology 2022Quote: ... and the post-nuclear supernatant was loaded onto an 8-step discontinuous sucrose density gradient (HEPES-buffered 0.2–2 M sucrose) and centrifuged at 55,000 rpm for 2h at 4 °C using an MLS50 rotor (Beckman Coulter). Extracellular acidification rate (ECAR ...
-
bioRxiv - Cell Biology 2019Quote: ... and centrifuged at 200,000 g for 3 h at 4°C in a TLS55 rotor (Beckman Coulter). The sucrose gradient was fractionated manually from the top ...
-
bioRxiv - Molecular Biology 2022Quote: ... The gradients were centrifuged at 35,000 rpm for 3 hours at 4°C (SW41 Ti rotor; Beckman) and subsequently fractionated using a Piston Gradient Fractionator (Biocomp instruments ...
-
bioRxiv - Biophysics 2023Quote: ... iVCL supernatant was centrifugated for 3 h at 25000 rpm and 4 °C (Beckman-Coulter L90K, USA). Precipitate was resuspended in the TNE buffer (0.1 M Tris-HCl ...
-
bioRxiv - Biochemistry 2021Quote: ... 2 mM DTT) and centrifuged for 2 hours and 15 minutes at 39000 rpm at 4°C (Beckman Coulter TLS55 rotor). Fractions corresponding to the large mitochondrial subunit were collected and subjected to buffer exchange (25 mM HEPES-KOH pH = 7.5 ...
-
bioRxiv - Physiology 2023Quote: ... Samples were ultracentrifuged at 100,000 rpm at 16°C for 2 hours (rotor: Beckman TLA-100 ...
-
bioRxiv - Plant Biology 2023Quote: ... followed by ultracentrifugation at 4°C for 2 h (38000 rpm, Beckman, SW41 rotor) through a 20-60% sucrose gradient (40 mM Tris-HCl pH 8.4 ...
-
Rhes protein transits from neuron to neuron and facilitates mutant huntingtin spreading in the brainbioRxiv - Neuroscience 2021Quote: ... The gradient was spun for 3 h at 180,000 × g (average) at 4°C (SW41 Beckman ultra-centrifuge). After the spin the top of the gradient was removed and discarded ...
-
bioRxiv - Microbiology 2021Quote: ... The outer membrane vesicles (OMVs) were then isolated by ultracentrifugation (140 000xg, 4°C) for 3 hours (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2022Quote: ... Gradients were ultracentrifuged at 28.000g for 3 h at 4°C in a SW 28 Ti rotor (Beckman). 1.13 mL fractions were then collected using the Gradient Station model 153 ...
-
bioRxiv - Biochemistry 2023Quote: ... Gradients were centrifuged at 35K rpm for 3 hrs at 4°C in a SW-41Ti rotor (Beckman) with maximum acceleration and no brake using a Beckman Optima L-90 Ultracentrifuge ...
-
bioRxiv - Biochemistry 2019Quote: ... in iso-osmolar RB150/Mg2+ (containing a reduced level (2%) of glycerol) and 80µl were transferred to 7 × 20 mm polycarbonate tubes (Beckman Coulter, Brea CA), overlaid with 80µl of 35% ...
-
bioRxiv - Biochemistry 2019Quote: ... After ultra-centrifugation (SW-60Ti rotor Beckman Coulter, 2 h, 100 000 rpm, 4°C) the gradient was manually fractioned in 200 μl fractions from the top to the bottom of the tube ...
-
bioRxiv - Biochemistry 2023Quote: ... lysosomes and mitochondria were enriched by centrifugation of the pooled PNS at 56,500 ×g for 7 min at 4 °C (Beckman-Coulter, 70 Ti fixed-angle rotor). The supernatant was removed ...
-
bioRxiv - Biophysics 2021Quote: ... The VP2 capsid protein fractions were pooled and subjected to centrifugation at 28,000 rpm (139,065 × g) for 3 h at 4°C (Sw40Ti rotor, Beckman Coulter). The pellet was resuspended in 50 mM Tris (pH 7.4) ...
-
bioRxiv - Cell Biology 2021Quote: ... and centrifuged at 97,658 x g for 3 h at 4°C using a SW41Ti rotor (Beckman & Coulter, # 331362). The polysome fractions were collected using the Foxy R1 Fraction Collector and immediately snap frozen with liquid nitrogen and stored at −80 °C ...
-
bioRxiv - Cell Biology 2021Quote: ... and centrifuged at 40,000 rpm (∼128,000 × g) for 3 h at 4°C using an MLS-5 rotor (Beckman Coulter). Aldolase (158 kDa ...
-
bioRxiv - Plant Biology 2020Quote: ... 50 μg/ml cycloheximide) and centrifuged for 3 h at 55,000 g and 4 °C in a Type 70 Ti rotor (Beckman). The pellet was dissolved in 1% SDS ...
-
bioRxiv - Molecular Biology 2022Quote: ... Gradients were spun for 3 hours at 4° C and 36,000 RPM (221,632 x g) on SW41-Ti rotor (Beckman Coulter). Monosome fractions were isolated from each sucrose gradient with Brandel Density Gradient Fractionator using 1.5 mL/min flow speed and 60% CsCl ...
-
bioRxiv - Microbiology 2019Quote: ... Gradients were centrifuged at 210,000 x g during 3 h at 4°C using a SW-41 swinging bucket rotor (Beckman) in an Optima L-100 XP Ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Biochemistry 2022Quote: ... The membrane was solubilized for 3 hours at 4°C before separation by ultracentrifugation at 100,000 g (Ti45, Beckman) for 45 min ...
-
bioRxiv - Neuroscience 2022Quote: ... supernatant was centrifuged for 3 h at 115,000 g and 4°C using the XPN-80 ultracentrifuge equipped with a Ti70 rotor (Beckman). EV pellets were resolved in 1 mL ice-cold PBS (Gibco ...
-
bioRxiv - Microbiology 2023Quote: ... The tube was centrifuged for 3 hours at 150’000 x g (4°C) using a SW 32.1 Ti swinging bucket (369651, Beckman Coulter). Finally ...
-
bioRxiv - Neuroscience 2023Quote: ... the liposomes were isolated by centrifugation for 3 h 40 mins at 55,000 rpm at 4°C in a SW 60 rotor (SW 60 Ti, Beckman). 20 µl were harvested from the top of the gradient and mixed with 8 µl of 4x Laemmli buffer (final 62.5 mM Tris-HCl ...
-
bioRxiv - Cell Biology 2021Quote: ... After centrifugation (285, 000 g for 2 h at 4 °C using a Beckman SW40Ti rotor), polysome profiles were recorded using an Äktaprime plus chromatography system (GE Healthcare) ...
-
bioRxiv - Microbiology 2022Quote: ... 4°C for 2 h (SW 32 Ti swinging-bucket rotor, Optima LE-80K Beckman Coulter) using a 25% w/v sucrose cushion ...
-
bioRxiv - Biochemistry 2019Quote: ... Resuspended cells were lysed by French Press (8,000 psi, 4°C, 2 passages) and lysates were centrifuged (Beckman 60Ti rotor, 30 min, 50,000 rpm, 4°C). Pellets were resuspended in 100 ml of buffer B (PBS [140 mM NaCl ...
-
bioRxiv - Biochemistry 2020Quote: ... One was through twice daily measurement of 2 or 3 levels of QC specimens obtained from Beckman Coulter Inc ...
-
bioRxiv - Cell Biology 2021Quote: ... The post-nuclear supernatants were ultracentrifuged using SW41Ti rotor at 100,000 g for 3 h at 4 °C on Optima L-90K (Beckman Coulter). The fraction between 0.4–0.5 M sucrose was collected ...
-
bioRxiv - Cell Biology 2021Quote: ... The samples were centrifuged at 4°C for 3 h at 100,000 g by using Avanti J-30XP (Beckman, USA), and the fractions were collected using a Brandel Fractionation System (USA ...
-
bioRxiv - Microbiology 2022Quote: ... The sample-containing tube was spun at 347,000 × g and 20°C for 3 hours using Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Microbiology 2022Quote: ... 20 mL of the filtrate was then ultracentrifuged at 150,000 × g at 4°C for 3 h (Beckman Coulter, USA) through a 20% (w/v ...
-
bioRxiv - Molecular Biology 2023Quote: ... using 10-40 % sucrose gradients in buffer A after 3 hours of centrifugation at 35,000 rpm and 4 °C in SW41 rotor (Beckman Coulter). To isolate ribosomes for structural analysis ...
-
bioRxiv - Molecular Biology 2022Quote: ... The gradients were ultra-centrifuged for 3 h at 175,000g at 4°C in a SW41Ti rotor (Beckman-Coulter, USA) and analyzed by measuring the absorbance continuously at 260 nm using a piston gradient fractionator (Biocomp Instruments) ...
-
bioRxiv - Molecular Biology 2022Quote: ... and spun at 40,000 rpm for 3 hours at 4°C using a SW 41 Ti Swinging-Bucket Rotor (Beckman Coulter). Sucrose gradient fractionation was performed by using a Brandel Density Gradient Fractionation System ...
-
bioRxiv - Molecular Biology 2023Quote: 8 mL of viral supernatant on a 3 mL of 20% sucrose cushion were ultracentrifugated for 3 h at 100,000 x g at 4°C using an Optima L80-XP instrument (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Synthetic Biology 2023Quote: ... The gradients were ultra-centrifuged at 41,000 rpm for 3 hours at 4°C (Optima L-80 XP ultracentrifuge (Beckman-Coulter)) ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 300,000×g at 4°C for 3 h in a TLA-110 fixed angle rotor (k-factor 13) (Beckman Coulter). The pellet was resuspended in 10 µL PBS of which 3 µL was adsorbed onto glow-discharged 2 nm carbon layer coated Quantifoil R1.2/1.3 400 mesh gold grids ...
-
bioRxiv - Microbiology 2023Quote: ... Each tube was centrifuged for 3 hours at 150’000 x g (4°C) using an Optima XPN-80 ultracentrifuge (Beckman Coulter) equipped with a SW 32 Ti swinging bucket (369650 ...
-
bioRxiv - Cell Biology 2023Quote: ... The obtained supernatant was layered onto 30 w/v% sucrose solution in ultracentrifugation tubes and subjected to ultracentrifugation at 100,000 × g for 3 h at 4°C using SW32Ti rotor (Beckman courter). The collected sucrose solutions were mixed with PBS and washed by ultracentrifugation at 100,000 × g for 1 h ...