Labshake search
Citations for Beckman :
1 - 50 of 1898 citations for 7 Benzyloxy 10 11 dihydrodibenzo b f 1 4 thiazepin 11 one since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2019Quote: ... 1 M sucrose) in a 11×34 mm polypropylene tube (Beckman Coulter) and centrifuged for 6 hours at 55,000 rpm at 4°C on a TLS-55 rotor (Beckman Coulter ...
-
bioRxiv - Systems Biology 2020Quote: ... in 1 ml 11×34 mm polycarbonate uncapped centrifuge tubes (Beckman Coulter 343778), and the resultant supernatant was ultracentrifuged at 100,000xg for 40 minutes at 4°C (rotor TLA 120.2 ...
-
bioRxiv - Systems Biology 2020Quote: ... each resultant fraction underwent separate ultracentrifugation at 100,000xg for 40 minutes at 4°C (rotor TLA 120.2) in 1 ml 11×34 mm polycarbonate uncapped centrifuge tubes (Beckman Coulter 343778). In EV-enriched pooled fraction experiments ...
-
bioRxiv - Physiology 2019Quote: ... Lysates (≈11 ml) were centrifuged at 26,000xg for 30 min at 4°C in a SW41Ti rotor (Beckman). The floating lipid droplet layers were harvested with a glass pipette and adjusted to 25% sucrose and 100 mM sodium carbonate ...
-
bioRxiv - Molecular Biology 2020Quote: ... at 50.000 rpm and 11 °C (Beckman SW65 Ti Rotor). The virion band was extracted using an 18‐ gauge needle syringe ...
-
bioRxiv - Cancer Biology 2022Quote: ... a 0.55× volume (11 µL) of SPRIselect (Beckman Coulter, B23317) was added to the purified library ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: Linear 10–30% glycerol gradients were prepared in 11□mm□×□34□mm polyallomer centrifuge tubes (Beckman Coulter, Brea, CA) with HEM buffer [25 mM HEPES (pH 7.5) ...
-
bioRxiv - Biophysics 2020Quote: ... in 11×34 mm thick-wall polycarbonate ultracentrifuge tubes (Beckman, ref. 343788). Ribosome pellets were washed once and subsequently resuspended with ribosome storage buffer (30 mM HEPES-KOH pH 7.4 ...
-
bioRxiv - Biochemistry 2019Quote: ... in 11×34 mm thick-wall polycarbonate ultracentrifuge tubes (Beckman, ref. 343788). Ribosome pellets were washed once and subsequently resuspended with ribosome storage buffer ...
-
bioRxiv - Cell Biology 2020Quote: ... and layered onto a continuous 10-50 w/w % sucrose gradient prepared in a 2.2 ml ultra-clear tube (11×34 mm, Beckman Coulter) using a two-step program in Gradient Master 108 machine ...
-
bioRxiv - Microbiology 2020Quote: ... were further purified by centrifugation through a 1.2 g/cm3 to 1.6 g/cm3 cesium chloride density gradient at 50,000 RPM for 4 hours at 11 °C in a Beckman SW 65 Ti rotor (Beckman Coulter, Brea, California). Visible “virus bands” in the gradients were collected using a Hamilton syringe and diluted 1:10 in 10 mM Tris-HCl ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... 40 min at 20 000 g (8 °C, 11 300 RPM, Beckman JA-13.1) to run a 30 ml 20% Percoll purification (in 250 mM Sorbitol ...
-
bioRxiv - Cell Biology 2023Quote: ... The PMF was loaded in two 11 × 60 mm centrifuge tubes (cat. 344062, Beckman) and then centrifuged on an SW 60 Ti rotor (Beckman ...
-
bioRxiv - Biophysics 2024Quote: ... Floatation assay was performed with polycarbonate centrifugation 11×34 mm tubes (Beckman Coulter, USA) and sucrose solutions prepared in HK buffer ...
-
bioRxiv - Immunology 2021Quote: ... Purified cDNA was amplified for 11 cycles before being cleaned up using SPRIselect beads (Beckman). Samples were diluted 4:1 (elution buffer (Qiagen):cDNA ...
-
bioRxiv - Biochemistry 2023Quote: ... pH 7.5) in a 11 x 34 mm Ultra-Clear centrifuge tubes (Beckman Coulter: 347356). The sucrose density gradient was centrifuged at 50,000 rpm for 3 hours at 4°C in a TLS-55 swinging bucket rotor (Beckman Coulter ...
-
bioRxiv - Microbiology 2022Quote: ... 100 μl of the eluate was transferred into a Beckman 11-mm ultracentrifuge tube (Beckman Coulter) for ultracentrifugation in an Optima TLX ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Immunology 2023Quote: ... Purified cDNA was amplified for 11 cycles before being cleaned up using SPRIselect beads (Beckman Coulter). Samples were diluted 9:1 (elution buffer (Qiagen):cDNA ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... 20 min at 20 000 g to pellet mitochondria (8 °C, 11 300 RPM, Beckman JA-13.1), 40 min at 20 000 g (8 °C ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... and further centrifuged 20 min at 20 000 g (8 °C, 11 300 RPM, Beckman JA-13.1) to pellet mitochondria after Percoll removal by dilution with 40 mL mitochondrial wash buffer (250 mM Sorbitol ...
-
bioRxiv - Genomics 2019Quote: ... we cleaned up single cell RNA by adding 11 µl of RNAClean SPRI beads (Beckman Coulter Genomics) into each well of 5 µl of cell or nucleus lysate ...
-
bioRxiv - Pathology 2021Quote: ... 20 U/ml SUPERase·In) in thickwall 11 x 34 mm polycarbonate tubes (Beckman Coulter Life Sciences; 343778). Samples were weighed and balanced by adding PEB and centrifuged in TLA100.3 rotor at 100,000 rpm for 1.4 h in a pre-chilled ultracentrifuge (Beckman coulter Optima MAX-XP Ultracentrifuge) ...
-
bioRxiv - Biophysics 2022Quote: ... We purified the folded chassis by glycerol gradient sedimentation by centrifugation[47] through a 10-45% glycerol gradient in TBE buffer supplemented with 11 mM MgCl2 for 130 min at 242,704g in a SW50.1 rotor (Beckman) at 4°C and collected in fractions ...
-
bioRxiv - Microbiology 2022Quote: ... and layered onto a preformed 11 mL 5% to 15% (wt/vol) Ficoll gradient in a 13.2 mL thin-wall polyallomer ultracentrifuge tube (Beckman Coulter). Gradients were centrifuged at 12,000 rpm for 2 h at 4°C in an SW41 Ti swinging-bucket rotor in a Sorvall Discovery SE ultracentrifuge ...
-
bioRxiv - Microbiology 2020Quote: ... and the resulting cDNA was PCR amplified (11 cycles) and purified using the Agencourt AMPure XP kit (Beckman Coulter Genomics). For Illumina NextSeq sequencing ...
-
bioRxiv - Microbiology 2020Quote: ... pH 7.5) at 45,000 RPM for 45 minutes at 11 °C in a Beckman 70.1 Ti rotor (Beckman Coulter, Brea, California). The pellet was resuspended in 10 mM Tris-HCl ...
-
bioRxiv - Plant Biology 2022Quote: ... Sucrose step gradient (sucrose in resuspension buffer) were prepared in Ultra-Clear™ centrifuge tube 11×89 mm (Beckman Coulter) starting from the bottom (%w/w) ...
-
bioRxiv - Neuroscience 2023Quote: ... The top 11 mL and the bottom 2 mL of the gradient were transferred to separate 60 mL 45Ti ultracentrifuge tubes (Beckman), topped up with PBS and centrifuged at 100,000 x g for 70 min at 4°C ...
-
bioRxiv - Microbiology 2021Quote: ... starting with 50% and topping off with 15% for a total of 11 mL was added to thin wall polypropylene ultracentrifuge tubes (Beckman Coulter). The tubes were immediately frozen and stored at -80 °C ...
-
bioRxiv - Cell Biology 2023Quote: ... A volume of lysate containing 125 ug RNA was loaded on 11 ml 15-50% sucrose gradients in 14 x 89 mm centrifuge tubes (Beckman Coulter). (Gradients were prepared in 20 mM HEPES-KOH pH 7.4 ...
-
bioRxiv - Cancer Biology 2021Quote: ... Cell suspensions were diluted 250 μL into 10 mL of ISOTON diluent and cell size was measured on a Coulter Z2 Cell Analyzer (Cat# 844 80 11, Beckman, Indianapolis, IN). Median cell volume was used for calculations ...
-
bioRxiv - Microbiology 2020Quote: ... Diluted virions were then centrifuged at 75,000 RPM for 30 minutes at 11 °C in a Beckman TLA 120 rotor (Beckman Coulter, Brea, California). The pellet was resuspended in 10 mM Tris-HCl ...
-
bioRxiv - Cancer Biology 2020Quote: ... Tie2-PE and CD34-FITC antibodies (eBioscience 17-5821-81, 17-1171, 12-5987, 25-0411, 11-0341-82) by flow cytometry (Beckman Coulter CyAn ADP) or confocal microscopy using Confocal Microscope Zeiss LSM 880 with Airyscan.
-
bioRxiv - Microbiology 2022Quote: Whole-cell absorbance spectra from 550 to 800 nm were taken from cells grown in BG-11 under VL and FRL for 30 days using a DU 640 spectrophotometer and associated software (Beckman Coulter, Brea, CA). For low-temperature fluorescence measurements at 77 K ...
-
bioRxiv - Systems Biology 2022Quote: ... supernatant containing metabolites extracted from 1.1×109 cells and 11 spike-ins were aliquoted into 1,000 vials using an automated liquid handler (Biomek 4000, Beckman Coulter, Inc., Brea, California, USA), with 5 μL solution per tube ...
-
bioRxiv - Biophysics 2022Quote: ... Labeled G-actin was clarified to remove any remaining F-actin or precipitated FMAL by centrifugation (10 min, 90,000 rpm in a Beckman TLA-120.2 rotor at 4°C). The extent of labeling (typically around 70% ...
-
bioRxiv - Bioengineering 2021Quote: ... or 7-Amino-Actinomycin D (7-AAD, Beckman Coulter, B88526) was added to the cell suspensions ...
-
bioRxiv - Cell Biology 2023Quote: ... 10% and 6% and ultracentrifuged at 187,000xg for 1:30h at 4°C in Sw32.1Ti rotor (Beckman Coulter). Afterwards ...
-
bioRxiv - Plant Biology 2021Quote: ... The supernatant was transferred into new centrifuge tubes and centrifuged at 40,000g (P40) or 100,000g (P100) for one hour (4°C, TLA100.3, Optima TLX Ultracentrifuge; Beckman Coulter) to pellet EVs and other particles as noted in figure legends ...
-
bioRxiv - Biophysics 2021Quote: ... centrifuged (Beckman Avanti, 1500 x g, 10 min, 4 °C) and pellets were flash-frozen and stored at −80 °C.
-
bioRxiv - Evolutionary Biology 2022Quote: ... The filtered supernatant from one 400 ml batch was then pelleted (1.5 hour at 24 000 rpm at 4 °C with Beckman Coulter L-90K centrifuge and 45 Ti rotor ...
-
bioRxiv - Systems Biology 2023Quote: ... Two libraries were prepared and sequenced: one with size-based selection for mRNA >4 kb using AMPure beads (Beckman) and a second library with no size selection.
-
bioRxiv - Cancer Biology 2022Quote: ... was removed using right-side size selection with AMPure XP beads at a 1:1 and 7:1 bead:sample ratio (Beckman Coulter) described previously26 ...
-
bioRxiv - Biophysics 2019Quote: ... 4 °C for 10 min using TLA-100 rotor (Beckman-Coulter). Tubulin in the supernatant was polymerized by incubating in the dark at 37 °C for 20 min ...
-
bioRxiv - Biochemistry 2019Quote: ... The supernatant was then slowly mixed with an equal volume of 4 M ammonium sulphate (2 M final concentration) at 4°C for 1 hour and spun at 10 K rpm using a JA-17 rotor (Beckman). Pellets containing RAD51 were suspended in 25 ml of resuspension buffer (0.5 M KCl ...
-
bioRxiv - Bioengineering 2023Quote: ... one Cytomat 10C Automated Incubator and one Cytomat Microplate Hotel (Beckman Coulter), one High-content Imaging System Image eXpress (Molecular Devices) ...
-
bioRxiv - Cell Biology 2023Quote: ... Homogenates were then transferred to a 50 ml tube and centrifuged for 10 mins at 1 000 × g at 4°C (Beckman Coulter). The resulting supernatant was then transferred to microfuge tubes for storage at -80°C as whole liver lysates or to fresh ultracentrifuge tubes for further processing.
-
bioRxiv - Cell Biology 2020Quote: Interstitial macrophages (CD45+CD64+Siglec-F−CD11bhigh) or alveolar macrophages (CD45+CD64+Siglec-F+CD11blow) were isolated from C57BL/6 by MOFLO system (Beckman Coulter). Isolated macrophages were cultured for 24 hrs in RPMI-1640 medium containing 10% FBS and 50μM 2-mercaptoethanol with or without GM-CSF (10 ng/ml).
-
bioRxiv - Biochemistry 2020Quote: ... centrifuged at 90,000 rpm for 10 min at 4°C (TLA120.1 Beckman Coulter), and then polymerized by incubation at 37°C for 30 mins ...
-
bioRxiv - Biochemistry 2021Quote: ... 1 h 10 min (45Ti, Beckman), resuspended in lysis buffer and stored in aliquots at –80°C until use ...