Labshake search
Citations for Beckman :
1 - 50 of 1326 citations for 6 Bromo 2 4 ethoxyphenyl quinoline 4 carboxylic acid since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2021Quote: ... KG, Staufen, Germany) (position 6, 4 × 5-s bursts) and subsequently centrifuged at 48,000g at 4°C (Beckman Avanti J-251 Ultracentrifuge ...
-
bioRxiv - Pathology 2020Quote: ... Hemocytes stained with 4’-6-diamidino-2-phenylindole (DAPI) were analyzed on a CytoFLEX flow cytometer with CytExpert software (Beckman-Coulter, USA). Plots of side scatter SSC-A versus forward scatter FSC-A were used for visualization of cell groups ...
-
bioRxiv - Neuroscience 2023Quote: ... The resulting supernatant was filtered with a membrane pore size of 0.2 μm (Whatman) and centrifuged at 120,000 × g for 4 h at 4 °C in polycarbonate bottle assemblies (Beckman coulter, 355603) in a 70.1 Ti fixed angle rotor (Beckman coulter ...
-
bioRxiv - Plant Biology 2023Quote: ... followed by ultracentrifugation at 4°C for 2 h (38000 rpm, Beckman, SW41 rotor) through a 20-60% sucrose gradient (40 mM Tris-HCl pH 8.4 ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C (Beckman Coulter). The pellet containing lentiviral particles was suspended in the residual medium ...
-
bioRxiv - Genomics 2020Quote: ... 4°C (Beckman Coulter). Supernatant was loaded onto 5 ml HisTrap FF columns (GE Healthcare ...
-
bioRxiv - Molecular Biology 2020Quote: ... 4°C (Beckman Coulter). Clarified lysates were poured several times over 0.5-1 ml Streptactin resin (IBA ...
-
bioRxiv - Cancer Biology 2023Quote: ... 4°C (Beckman Coulter). The pellet containing lentiviral particles was suspended in the residual medium ...
-
bioRxiv - Microbiology 2021Quote: ... lysates were placed on top of a 20-50% sucrose gradient and sedimented at 35,000 rpm (218,000x g) for 6 hours at 4°C on SW40Ti rotor (Beckman). For flotation ...
-
bioRxiv - Molecular Biology 2019Quote: ... and centrifuged for 6 hours at 55,000 rpm at 4°C on a TLS-55 rotor (Beckman Coulter) in a TL-100 ultracentrifuge (Beckman Coulter) ...
-
bioRxiv - Cell Biology 2023Quote: ... 10% and 6% and ultracentrifuged at 187,000xg for 1:30h at 4°C in Sw32.1Ti rotor (Beckman Coulter). Afterwards ...
-
bioRxiv - Biochemistry 2019Quote: ... Resuspended cells were lysed by French Press (8,000 psi, 4°C, 2 passages) and lysates were centrifuged (Beckman 60Ti rotor, 30 min, 50,000 rpm, 4°C). Pellets were resuspended in 100 ml of buffer B (PBS [140 mM NaCl ...
-
bioRxiv - Biochemistry 2019Quote: ... After ultra-centrifugation (SW-60Ti rotor Beckman Coulter, 2 h, 100 000 rpm, 4°C) the gradient was manually fractioned in 200 μl fractions from the top to the bottom of the tube ...
-
bioRxiv - Immunology 2021Quote: Cells were analyzed using 4-to 6-color direct immunofluorescence staining on a Cytoflex LX or S (Beckman Coulter) flow cytometer ...
-
bioRxiv - Cancer Biology 2021Quote: ... Libraries were further amplified 4–6 PCR cycles as described [43] and purified using AMPure XP beads (Beckman Coulter). ATAC-seq libraries were subsequently sequenced 2 x 75 bp on an Illumina NextSeq500.
-
bioRxiv - Microbiology 2022Quote: ... The gradient was spun at 45,000 rpm (~200,000 x g) for 6 hours at 4 °C in a SW60Ti rotor (Beckman Coulter). Successive 0.4 mL fractions were collected by pipetting and their densities measured ...
-
bioRxiv - Cell Biology 2022Quote: ... and the post-nuclear supernatant was loaded onto an 8-step discontinuous sucrose density gradient (HEPES-buffered 0.2–2 M sucrose) and centrifuged at 55,000 rpm for 2h at 4 °C using an MLS50 rotor (Beckman Coulter). Extracellular acidification rate (ECAR ...
-
bioRxiv - Biochemistry 2019Quote: ... 4 °C (Beckman JLA 16.2500) and then bound to 0.1 cell paste volumes of anti-FLAG resin (Sigma M2 ...
-
bioRxiv - Biochemistry 2019Quote: ... 4 °C (Beckman JLA 8.1000), washed in pre-chilled PBS and resuspended in 20 cell paste volumes of preparation buffer (50 mM Tris pH 8 ...
-
bioRxiv - Biochemistry 2020Quote: ... A Multisizer 4 (Beckman Coulter) machine was used ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (SW55Ti rotor, Beckman). The pellets were resuspended in 25% (w/v ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (VTi65.1 rotor, Beckman) with the maximum acceleration and minimum deceleration allowing for isopycnic separation of subcellular particles and membranes ...
-
bioRxiv - Biochemistry 2021Quote: ... 4°C (SW41 rotor, Beckman). The supernatant was concentrated with a 100-kDa molecular weight cutoff concentrator (Merck Millipore ...
-
bioRxiv - Cancer Biology 2023Quote: ... cells were seeded into 6-well plates at a concentration of 4×105 cells per well and counted cumulatively with a Coulter counter (Beckman) every three days for two weeks ...
-
bioRxiv - Cell Biology 2023Quote: ... down to 6 ml and ultracentrifuged at 10,000xg for 16 min at 4°C in MLA-80 rotor (Beckman Coulter). The pellet was resuspended and washed with PBS at the same conditions (volume ...
-
bioRxiv - Cell Biology 2021Quote: ... After centrifugation (285, 000 g for 2 h at 4 °C using a Beckman SW40Ti rotor), polysome profiles were recorded using an Äktaprime plus chromatography system (GE Healthcare) ...
-
bioRxiv - Microbiology 2022Quote: ... 4°C for 2 h (SW 32 Ti swinging-bucket rotor, Optima LE-80K Beckman Coulter) using a 25% w/v sucrose cushion ...
-
bioRxiv - Biochemistry 2021Quote: ... 2 mM DTT) and centrifuged for 2 hours and 15 minutes at 39000 rpm at 4°C (Beckman Coulter TLS55 rotor). Fractions corresponding to the large mitochondrial subunit were collected and subjected to buffer exchange (25 mM HEPES-KOH pH = 7.5 ...
-
bioRxiv - Microbiology 2019Quote: ... performed ultracentrifugation (40,000 rpm, either 4 h or 18 h, +4 °C, SW41 rotor, Beckman Coulter), and collected approximately 600 μl fractions by puncturing the tubes with a thin (23G or 25G ...
-
bioRxiv - Cancer Biology 2020Quote: ... cells were grown for 4-6 days and counted using an Incucyte (Essen Biosciences) or a Z2 Coulter Counter (Beckman Coulter). Small molecule dose-response curves were printed using an D300e Digital Dispenser (HP Specialty Printing Systems ...
-
bioRxiv - Cancer Biology 2021Quote: ... 4°C (Beckman Coulter Allegra X15r). After the final wash to remove Matrigel ...
-
bioRxiv - Molecular Biology 2021Quote: ... 4°C (SW41Ti rotor, Beckman Coulter) and 16 fractions were collected ...
-
bioRxiv - Molecular Biology 2021Quote: ... 4°C (SS34 Rotor, Beckman Coulter).
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (with Beckman SW32 rotor). The pellet will contain rough microsomes and the interface between 0.25-1.3M will contain smooth microsomes ...
-
bioRxiv - Neuroscience 2021Quote: ... 4°C (Beckman Coulter F301.5 rotor) to remove large aggregates ...
-
bioRxiv - Biophysics 2023Quote: ... 4 °C (TLA-45 Beckman rotor). The solubilized proteins were separated on 4–15 % BN-gels and analyzed by immune detection using polyclonal α-YidC antibodies ...
-
bioRxiv - Neuroscience 2020Quote: ... and were centrifuged at 82,500 x g for 2 h at 4 °C (Beckman SW28 swing rotor). The band between 1.0 and 1.2 M sucrose was collected as the synaptosome fraction and diluted with 80 mM Tris-HCl (pH 8.0) ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... in 67 mM HEPES-KOH pH 7.2) after 2 h of ultracentrifugation (4 °C, 5000 RPM, Beckman SW41 ...
-
bioRxiv - Molecular Biology 2023Quote: ... followed by ultracentrifugation at 70k RPM at 4⁰C for 2 h (Optima TLX ultracentrifuge, Beckman Coulter). Ribosome pellets were then resuspended in Trizol and extracted for RNA according to manufacturer’s instructions ...
-
bioRxiv - Cancer Biology 2024Quote: ... centrifuged twice at 100,000 × g for 2 h at 4°C (Beckman Coulter Optima XE-90 Ultracentrifuge). The supernatant was replaced with DPBS between ultracentrifugation spins ...
-
bioRxiv - Molecular Biology 2019Quote: ... was loaded onto 4 ml of a 10% −30% (w/v) linear sucrose gradient and centrifuged at 74,000g at 4°C for 6 h (Beckman MLS-50 rotor). Fractions (250 µl ...
-
bioRxiv - Molecular Biology 2021Quote: ... Gradients were centrifuged at 36000 RPM for 2 hours at 4°C in a SW41 rotor (Beckman Coulter) and then fractions were collected using a gradient collector (Teledyne ISCO gradient station ...
-
bioRxiv - Microbiology 2020Quote: ... Purification was done by ultracentrifugation for 2 h at 154,000xg at 4°C in a SW41 rotor (Beckman) using a two-step sucrose gradient (20%/50% w/v in HNE) ...
-
bioRxiv - Cell Biology 2020Quote: ... the cleared supernatant was ultracentrifuged at 47,000 g for 2 hours at 4 °C using the JA25.50 rotor (Beckman). The virus was resuspended overnight in 180 μL D10 medium at 4 °C ...
-
bioRxiv - Cell Biology 2021Quote: ... 4 °C for 2 h in an Optima L-100XP ultracentrifuge (with SW 55 Ti rotor, Beckman Coulter). Fractionation was done manually by collecting every 200 μl volume from the top till the bottom of each centrifuge tube ...
-
bioRxiv - Molecular Biology 2023Quote: ... Digested extracts were then loaded on 1 M sucrose cushions 116 and centrifuged at 70,000 rpm for 2 hours at 4°C in a TLA100.4 rotor (Beckman). Ribosome pellets were resuspended in 300 µl of TRIzol reagent (Invitrogen) ...
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...
-
bioRxiv - Microbiology 2020Quote: ... 4°C in an SW55Ti rotor (Beckman), and the virus pellet harvested for analysis by WB with αGag.
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...