Labshake search
Citations for Beckman :
1001 - 1050 of 2300 citations for 9 10 Dihydro 4H benzo 4 5 cyclohepta 1 2 b thiophen 4 one since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2022Quote: Whole bovine milk samples (200 mL) were centrifuged at 3,000 x g for 15 min at 4°C (Allegra X-15R, Beckman Coulter, France) to separate the fat from the skimmed milk ...
-
bioRxiv - Biochemistry 2022Quote: ... Soluble and insoluble fractions were isolated via centrifugation (90,000 x g, 30 min, 4 °C) in an Optima™ MAX-OP (Beckman Coulter) centrifuge using the TLA-100.3 rotor ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was recovered and centrifuged at 60,000 rpm for 15 min at 4°C in an Optima TL micro-ultracentrifuges (TLA 100.3 rotor Beckman Coulter, Fullerton, CA) to obtain the Golgi-enriched p100 pellet fraction ...
-
bioRxiv - Physiology 2022Quote: ... 40 ml of filtrates were ultracentrifuged twice in sterile 10.4 mL polycarbonate bottles at 100 000 x g for 70 min at 4°C using an Optima L-100 XP Ultracentrifuge equipped with 90 Ti Fixed-Angle Titanium Rotor (Beckman Coulter). The final EVs pellets were suspended in 200 µl of PBS (Lonza) ...
-
bioRxiv - Neuroscience 2022Quote: ... The discontinuous sucrose gradient was centrifuged at 242K g for 47 min at 4 °C in a vertical rotor (VTi50 rotor, Beckman Coulter). The bulk GC fraction (GCF ...
-
bioRxiv - Microbiology 2022Quote: ... Lysates were then submitted to centrifugation at 100,000 g for 45 min at 4°C in an Ultracentrifuge Beckman XL-90 (Beckman France, Villepinte) equipped with a 70.1T1 rotor ...
-
bioRxiv - Cell Biology 2024Quote: ... Samples were then spun at 100,000 xg for 16 h at 4°C using a TLS-55 swinging-bucket rotor and benchtop ultracentrifuge (Optima Max-XP, Beckman Coulter). Fractions were collected and loaded in SDS-PAGE for WB.
-
bioRxiv - Cancer Biology 2024Quote: ... CRC cells were then cocultured at a 1:1 ratio with BMDCs for 4 hours and analyzed for uptake of CRC DNA by flow cytometry on the CytoFlex S cytometer (Beckman Coulter). Analysis was performed in FlowJo.
-
bioRxiv - Biophysics 2024Quote: ... The virions were harvested from the supernatant by centrifugation through 1.5ml of 30% sucrose at 10,000 RPM at 4°C for 2hrs (Beckman L8-70M Ultracentrifuge). The resulting pellet of virions was resuspended in 20ul of RIPA lysis buffer containing protease inhibitors.
-
bioRxiv - Molecular Biology 2024Quote: ... for ultracentrifugation at 100,000 rcf for 70 min at 4 °C using a Optima XE-90 ultracentrifuge with a SW 32 Ti rotor (Beckman Coulter). The EV pellet was resuspended in 0.22 μm-filtered sterile PBS and freshly-used or stored at −80 °C until further use ...
-
bioRxiv - Neuroscience 2024Quote: ... and centrifuged at ∼14.000 x g max (∼10900 x g average) for 22 min at 4 °C (Beckman Coulter, MAX-XP). After centrifugation ...
-
bioRxiv - Cell Biology 2024Quote: ... The samples were ultracentrifuged at 39,000 rpm at 4°C for 2.5 h in an SW41 rotor (Beckman Coulter, California, USA). Finally ...
-
bioRxiv - Microbiology 2023Quote: ... The normalized cultures were then centrifuged at 5030 x g and 4°C for 20 minutes on an Avanti J-26 XPI (Beckman-Coulter) centrifuge (JS 5.3 rotor) ...
-
bioRxiv - Microbiology 2024Quote: ... Most of the supernatant was discarded leaving 12x∼200 µL of concentrated broken pieces of genomic fiber that were pooled and layered on top of ultracentrifuge tubes of 4 mL (polypropylene centrifuge tubes, Beckman Coulter) containing a discontinuous cesium chloride gradient (1.4 ...
-
bioRxiv - Neuroscience 2023Quote: ... Supernatant were loaded on top of a discontinuous 0.75/1.0/2.33 M sucrose density gradient and centrifuge at 242,000 x g for 60 min at 4°C (Beckman SWTi41 swing rotor). The growth cone depleted fraction was collected between 0.75 M and 1.0 M sucrose ...
-
bioRxiv - Physiology 2023Quote: ... was ultracentrifuged twice in sterile 10.4 mL polycarbonate bottles at 100 000 × g for 70 min at 4°C (Optima L-100 XP Ultracentrifuge, 90 Ti Fixed-Angle Titanium Rotor; Beckman Coulter). The final EV pellet was suspended in 50 µl of PBS without Ca2+ and Mg2+ (Lonza ...
-
bioRxiv - Cancer Biology 2023Quote: ... and centrifuged at 100,000 x g either for 4 hr (hollow fiber bioreactor) or overnight (2D flask culture) in a SW32 rotor (Beckman Coulter). For the preparation of the density gradient ...
-
bioRxiv - Plant Biology 2023Quote: ... The cAW was collected by spinning at 700 x g for 20 min at 4 ⁰C (JA-14 rotor, Beckman Coulter; Avanti J-20TM centrifuge, Beckman Coulter). vAW was filtered through a single layer of Miracloth and was combined with the cAW ...
-
bioRxiv - Cell Biology 2023Quote: ... The cilia in the upper phase were sedimented by centrifugation (27,000 g, 4°C, 20 min; Beckman Coulter, Avanti JXN-26) and resuspended in Hepes-Magnesium-EGTA-Potassium (HMEK ...
-
bioRxiv - Biochemistry 2023Quote: ... The sample was run on the gradient for 16 hrs at 4 °C using an Optima XE-90 ultracentrifuge (SW40Ti rotor, Beckman-Coulter) at 30,000 rpm ...
-
bioRxiv - Cell Biology 2023Quote: ... and ultracentrifuged at 200,000 × g for 4 hours using a SW 55 Ti rotor in a Beckman OPTIMA90X ultracentrifuge (Beckman Coulter, USA). Finally ...
-
bioRxiv - Biophysics 2023Quote: ... the SWCNT suspension was centrifuged at 30000 rpm (164 000 x g) for 4 h at 25 °C (Optima XPN-80, Beckman Coulter) to remove any remaining nanotube aggregates.
-
bioRxiv - Genomics 2023Quote: ... cellular/protein debris were then collected by centrifugation at 1,000xg for 15 minutes at 4°C (Beckman Coulter Allegra X-14R), and the supernatant (DNA ...
-
bioRxiv - Biophysics 2022Quote: ... EVs were separated from protein aggregates and free reagents by bottom-up density gradient centrifugation in sucrose for 17.30 h at 192,000 g and 4°C using a SW40 rotor (k-factor 144.5; Beckman Coulter, Fullerton, California, USA). Twelve fractions of 1 mL were then collected from the top of the gradient and respective densities were determined by refractometry using an Atago Illuminator (Japan) ...
-
bioRxiv - Neuroscience 2024Quote: ... The same mass of total extracts was taken for a high spin at 154,000 g for 20 minutes in 4 °C using an ultracentrifuge (Beckman, TLX-120K) to obtain the supernatant soluble fraction (S1 ...
-
bioRxiv - Biochemistry 2023Quote: ... Mitochondrial crude was pelleted by centrifugation at 9500 ×g (4 °C, 15 min) using the Optima XE-90 Ultracentrifuge with a Ti-45 rotor (Beckman Coulter). The final pellet was resuspended in 2 mL of Resuspension buffer (250 mM sucrose ...
-
bioRxiv - Biochemistry 2023Quote: ... then centrifuged at 27,000 gmax for 15 min at 4°C (Optima XPN-100 Ultracentrifuge, Beckman Coulter, with SW60 Ti rotor). Resuspension of the pellet (sub-mitochondrial particles ...
-
bioRxiv - Bioengineering 2023Quote: ... Samples were ultracentrifuged at 100,000×g for 70 min at 4°C using the Beckman OptimaTM L-80 XP ultracentrifuge (Beckman Coulter, CA). The supernatant was discarded ...
-
bioRxiv - Plant Biology 2024Quote: ... The tubes were then centrifuged for 20 min at 700 x g with slow acceleration at 4°C using a JA-14 rotor (Avanti J-20 XP centrifuge; Beckman Coulter). The resulting apoplastic wash collected was passed through a 0.22 µm membrane filter to remove bacteria and larger debris ...
-
bioRxiv - Microbiology 2024Quote: ... and resolved by ultracentrifugation at 36,000 rpm for 3 h at 4°C with the fastest braking in Optima XPN-80 Ultracentrifuge equipped with SW-41Ti rotor (Beckman Coulter). Gradients were fractionated (0.5 mL/fraction ...
-
bioRxiv - Bioengineering 2024Quote: ... we first measured a cell line population in PBS suspension using a coulter counter (Beckman Coulter Multisizer 4, 100 μm aperture) to obtain a cell volume distribution with the standard unit ...
-
bioRxiv - Cancer Biology 2024Quote: ... cells were resuspended in 100µL of PBS and stored at 4°C in the dark until samples were analyzed on a CytoFLEX LX Flow Cytometer (Beckman Coulter). Data was analyzed using FlowJo® software.
-
bioRxiv - Microbiology 2024Quote: ... Samples were balanced and centrifuged at 42,000 rpm for 35m at 4°C in a SW55Ti rotor and buckets with tube adaptors (Beckman REF: 356860). The supernatant was then concentrated to 80μl by spinning through Amicon 3kDa MWCO concentrator units at 14,000xg for 15-30m at 4°C ...
-
bioRxiv - Microbiology 2024Quote: Bacterial isolates were grown overnight on LB agar and DNA extraction was performed using the GenFind v3 gDNA extraction kit according to standard protocol (Supp. Table 4) (Beckman Coulter). For the mock microbial community ...
-
bioRxiv - Immunology 2023Quote: ... and B cells were determined using Flow-Count fluorospheres (Beckman) and a Cytoflex flow cytometer (Beckman ...
-
bioRxiv - Biophysics 2021Quote: ... which were centrifuged at 3000 rpm for 15 minutes at 4°C using a fixed angle centrifuge (Beckman Coulter, Brea, CA, USA). After removal of excess supernatant ...
-
bioRxiv - Cancer Biology 2021Quote: Proliferation of IL-32 KO and WT mock cells was assessed by cell counting every day for 4 days using cell coulter (Beckman Coulter Diagnostics). Cell viability was assessed by Trypan blue staining or by annexin/PI flow cytometry and analyzed by FACS Diva software (BD Biosciences).
-
bioRxiv - Biophysics 2022Quote: ... The tubes were filled with PBS to reach the final volume and samples were ultracentrifuged at 120,000 g for 60 minutes at 4°C (70.1 Ti rotor, k-factor 36, Beckman Coulter, Brea, CA, USA). Finally ...
-
bioRxiv - Molecular Biology 2019Quote: ... was clarified by centrifugation at 10,000 rpm for 30 min at 4 °C using an SW-28 rotor in an Optima L-90K Ultracentrifuge (Beckman Coulter, USA) and was then ultracentrifuged at 25,000 rpm for 6 h at 4 °C using the same rotor ...
-
bioRxiv - Molecular Biology 2019Quote: ... The DG was centrifuged 18 h at 100,000 g and 4 °C using SW 32.1 Ti rotor (Beckman Coulter, Fullerton, California, USA). Density fractions of 1 ml were collected and fractions 9-10 pooled ...
-
bioRxiv - Plant Biology 2020Quote: ... All samples were centrifuged in a single 2 h run with sedimentation at 50,000 g and 4°C using small 13 x 51 mm ultracentrifugation tubes in SW55 Ti rotor (Beckman Coulter, Krefeld, Germany). These centrifugation settings were optimized for polysome and monosome separations ...
-
bioRxiv - Cell Biology 2020Quote: ... Vacuoles were separated from free dye by centrifugation (100,000 x g, 25 min, 4°C, SW-60 Ti rotor, Beckman L8-80M Ultracentrifuge) and recovered from the 0%-4% interface ...
-
bioRxiv - Biophysics 2021Quote: ... then the supernatant was ultracentrifuged at 100000×g for 20 min at 4 °C using an Optima L-100K ultracentrifuge (Beckman Coulter, USA) equipped with a SW 40 Ti swinging bucket rotor ...
-
bioRxiv - Plant Biology 2021Quote: ... The resulting slurry was centrifuged for 15 min at 9000 rpm at 4 °C using a JA14 rotor (Beckman Coulter, Brea, CA). The supernatant was filtered with a Miracloth and kept on ice ...
-
bioRxiv - Plant Biology 2021Quote: ... sucrose was transferred to the bottom of the tube using a Pasteur pipette and centrifuged at 27,000 rpm for 3 hours at 4° C using an SW28 Ti rotor (Beckman Coulter, Brea, CA). Each pellet containing the virus particles was resuspended in 1 mL resuspension buffer overnight with gentle shaking at 4 °C ...
-
bioRxiv - Biochemistry 2021Quote: ... Lentivirus from the cell supernatant was collected 24h later by ultracentrifugation with a Sw28 rotor (Beckman Coulter; 22,000 rpm, 2h, 4°C). Finally ...
-
bioRxiv - Bioengineering 2021Quote: ... The resulting supernatant was then ultracentrifuged at 50,000 RPM and 4 °C for 90 minutes using a 70.1 Ti rotor (Beckman Coulter, Brea, CA, USA) with 1 mL 15% sucrose cushion per tube ...
-
bioRxiv - Cell Biology 2021Quote: ... The samples were centrifuged at 60,000 rpm at 4°C for 2hr in an SW65 Ti ultracentrifuge rotor (Beckman Coulter, California, USA). The translucent polysome pellets were washed by gently dispensing and removing 500 µl of ice-cold RNase-free water ...
-
bioRxiv - Microbiology 2020Quote: ... RNA was pelleted by centrifugation for 24 h at 4 °C and 104.000 g in a SW28.1 swing out rotor (Beckman Coulter, Brea, CA, USA). RNA was taken up in 100 µl H2O and 500 µl TS buffer was added ...
-
bioRxiv - Molecular Biology 2020Quote: ... the serum was centrifuged (200,000xg, at 4°C for 18 hours) using a Beckman Coulter Optima XE-100 Ultracentrifuge (Beckman Coulter, CA, USA), with a SW41Ti rotor (Beckman Coulter ...