Labshake search
Citations for Beckman :
51 - 100 of 1172 citations for 4 Keto 13 cis retinoic acid since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2022Quote: ... The gradients were prepared using freeze-thaw method42 in Thinwall Ultra-Clear ultracentrifuge tubes (5 ml, 13×51 mm; Beckman-Coulter). To create the 50% sucrose cushion ...
-
bioRxiv - Microbiology 2024Quote: ... Peptidoglycan was obtained by centrifuging for 13 min at 60,000 rpm at 20 °C (TLA100.3 Beckman rotor; OptimaTM Max ultracentrifuge Beckman, Beckman Coulter, California, USA). Pellets were washed 3-4 times by repeated cycles of centrifugation and resuspension in water ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C (Beckman Coulter). The pellet containing lentiviral particles was suspended in the residual medium ...
-
bioRxiv - Genomics 2020Quote: ... 4°C (Beckman Coulter). Supernatant was loaded onto 5 ml HisTrap FF columns (GE Healthcare ...
-
bioRxiv - Molecular Biology 2020Quote: ... 4°C (Beckman Coulter). Clarified lysates were poured several times over 0.5-1 ml Streptactin resin (IBA ...
-
bioRxiv - Cancer Biology 2023Quote: ... 4°C (Beckman Coulter). The pellet containing lentiviral particles was suspended in the residual medium ...
-
bioRxiv - Genomics 2022Quote: ... Nucleic acid purification was performed using SPRI Select (BECKMAN COULTER), nucleic acid concentration was determined by Qubit High Sensitivity DNA assay (Thermo Fisher) ...
-
bioRxiv - Neuroscience 2022Quote: ... which was then sealed and placed into a hematocrit spinner (2 minutes at 13, 700 g; StatSpin CritSpin Microhematocrit Centrifuge, Beckman Coulter, Inc). Measurements were taken to calculate percent (% ...
-
bioRxiv - Microbiology 2024Quote: ... Peptidoglycan was obtained by centrifuging for 13 min at 60,000 rpm at 20 °C (TLA100.3 Beckman rotor; OptimaTM Max ultracentrifuge Beckman, Beckman Coulter, California, USA). Pellets were washed 3-4 times by repeated cycles of centrifugation and resuspension in water ...
-
bioRxiv - Microbiology 2024Quote: ... of each culture or 20 µL of each DMB was added to 13 x 51 mm polypropylene centrifuge tubes (Beckman Coulter, Sykesville, MD) containing 3 mL of Working Percoll Solution (WPS) ...
-
bioRxiv - Biochemistry 2020Quote: ... A Multisizer 4 (Beckman Coulter) machine was used ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (SW55Ti rotor, Beckman). The pellets were resuspended in 25% (w/v ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (VTi65.1 rotor, Beckman) with the maximum acceleration and minimum deceleration allowing for isopycnic separation of subcellular particles and membranes ...
-
bioRxiv - Biochemistry 2021Quote: ... 4°C (SW41 rotor, Beckman). The supernatant was concentrated with a 100-kDa molecular weight cutoff concentrator (Merck Millipore ...
-
bioRxiv - Cell Biology 2024Quote: ... 4-laser Gallios (Beckman Coulter) flow cytometer ...
-
bioRxiv - Microbiology 2020Quote: ... Unsieved soil samples were suspended in water and analyzed on a LS 13 320 Series Laser Diffraction Particle Size Analyzer (Beckman Coulter Brea CA 92821). Particle sizes were grouped according USDA soil texture classification ...
-
bioRxiv - Immunology 2021Quote: ... After purification of nucleic acids by Agencourt RNA Clean XP (Beckman Coulter) and subsequent treatment with DNase I ...
-
bioRxiv - Plant Biology 2024Quote: ... were carefully removed starting from the top of the gradient using a pipet and transferred to a polycarbonate tube (Beckman 13 x 51 mm, #349622). The density of each fraction was determined either by weighing the fraction and dividing by the volume ...
-
bioRxiv - Cancer Biology 2021Quote: ... 4°C (Beckman Coulter Allegra X15r). After the final wash to remove Matrigel ...
-
bioRxiv - Molecular Biology 2021Quote: ... 4°C (SW41Ti rotor, Beckman Coulter) and 16 fractions were collected ...
-
bioRxiv - Molecular Biology 2021Quote: ... 4°C (SS34 Rotor, Beckman Coulter).
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (with Beckman SW32 rotor). The pellet will contain rough microsomes and the interface between 0.25-1.3M will contain smooth microsomes ...
-
bioRxiv - Neuroscience 2021Quote: ... 4°C (Beckman Coulter F301.5 rotor) to remove large aggregates ...
-
bioRxiv - Biophysics 2023Quote: ... 4 °C (TLA-45 Beckman rotor). The solubilized proteins were separated on 4–15 % BN-gels and analyzed by immune detection using polyclonal α-YidC antibodies ...
-
bioRxiv - Neuroscience 2021Quote: ... KG, Staufen, Germany) (position 6, 4 × 5-s bursts) and subsequently centrifuged at 48,000g at 4°C (Beckman Avanti J-251 Ultracentrifuge ...
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...
-
bioRxiv - Microbiology 2020Quote: ... 4°C in an SW55Ti rotor (Beckman), and the virus pellet harvested for analysis by WB with αGag.
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...
-
bioRxiv - Cell Biology 2020Quote: ... 4 °C with 70Ti rotor (Beckman Coulter) to collect sEV pellets in double 0.22 μm-filtered PBS ...
-
bioRxiv - Microbiology 2024Quote: ... 4 °C in SW41 rotor (Beckman Coulter). Polysomes profiles were obtained using Biocomp Piston Gradient Fractionator (BioComp Instruments ...
-
bioRxiv - Microbiology 2024Quote: ... 4°C (Optima TLX Ultracentrifuge, Beckman Coulter). The pellet was resuspended in 200 µL of ultrapure water.
-
bioRxiv - Microbiology 2022Quote: ... 4 °C in SW41 rotor (Beckman Coulter). Samples were fractionated and collected using Biocomp Piston Gradient Fractionator (BioComp Instruments) ...
-
bioRxiv - Microbiology 2022Quote: ... 4 °C in SW28 rotor (Beckman Coulter). Gradients were fractionated using Biocomp Piston Gradient Fractionator (BioComp Instruments) ...
-
bioRxiv - Developmental Biology 2024Quote: ... at 4°C (JLA 8.1000 rotor, Beckman), lysed in Lysis buffer (20 mM Hepes ...
-
bioRxiv - Biophysics 2024Quote: ... 4 °C (Type 70 Ti, Beckman Coulter), the supernatant was purified by IMAC (5 mL HiTrap Chelating HP ...
-
bioRxiv - Cell Biology 2021Quote: ... then finally at 100,000 g for 4 h at 4 ℃ using an SW28 rotor (Beckman Coulter, Fullerton, CA, USA). The pelleted exosomes were collected then subsequently resuspended in PBS ...
-
bioRxiv - Cell Biology 2021Quote: ... Hettich) at 4°C and then centrifuged at 40000 rpm for 4h30 at 4°C using SW41Ti rotor (Beckman). The supernatant was then UV inactivated at a wavelength of 254 nm for 4 min (3 times ...
-
bioRxiv - Microbiology 2023Quote: ... The lysates containing matured PsVs were loaded on an OptiPrep gradient that had been stabilized at least 1 h and centrifuged at 50k x g for 3.5-4 h at 4°C in a SW-55Ti rotor (Beckman). Fractions were collected in siliconized tubes and subjected to SDS-PAGE followed by Coomassie blue staining to assess the abundance of L1 and L2 proteins ...
-
bioRxiv - Genetics 2024Quote: ... and spun at 70,000 rpm for 4 hours at 4°C using a TLA 100.3 Rotor in an Optima Ultracentrifuge (Beckman, 361889). After centrifugation ...
-
bioRxiv - Microbiology 2024Quote: ... and the remainder was then loaded onto a 20%-60% sucrose cushion and centrifuged at 25,000 rpm at 4°C for another 4 hours using the SW41 rotor (Beckman). The initial 5 μL sample and each sucrose gradient layer were then absorbed ...
-
bioRxiv - Microbiology 2024Quote: ... The lysates containing matured PsVs were loaded on an OptiPrep gradient that had been stabilized at least 1 h and centrifuged at 50k ×g for 3.5-4 h at 4°C in a SW-55Ti rotor (Beckman). Fractions were collected in siliconized tubes and subjected to SDS-PAGE followed by Coomassie blue staining to assess the abundance of L1 and L2 proteins ...
-
bioRxiv - Biochemistry 2020Quote: ... which were centrifuged at 50,000rpm for 4 hours at 4°C using a TLS55 rotor and an Optima MAX-XP Ultracentrifuge (Beckman Coulter). The sample was physically fractionated into 10 fractions of 85 uL each ...
-
bioRxiv - Molecular Biology 2022Quote: ... 800 µl of EDTA-treated lysate was layered on top of the sucrose gradient and ultracentrifuged at 35000 rpm for 4 hours at 4 °C in a SW41Ti rotor (Beckman). After centrifugation ...
-
bioRxiv - Immunology 2020Quote: ... all CCMV CP preparations were purified two times using an ultracentrifuge and 30% sucrose cushion – first with additional 0.5% Triton X-100 and the second time without Triton X-100 (4 h, 50 000 rmp, 4°C; Type 70Ti rotor, Beckman) and the pellet was then dissolved in buffer A ...
-
bioRxiv - Cell Biology 2022Quote: ... 4–40% sucrose gradient prepared in lysis buffer and centrifuged at 150,000 × g for 4 or 16 h at 4°C in a MLS-50 rotor (Beckman Coulter). Thereafter ...
-
bioRxiv - Neuroscience 2023Quote: ... the samples were filtered with a membrane pore size of 0.2 μm and centrifuged at 120,000 × g for 4 h at 4 °C in polycarbonate bottle assemblies (Beckman coulter, 355603) in a 70.1 Ti fixed angle rotor (Beckman coulter ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C in a TLA 100.3 rotor (Beckman). P13 ...
-
bioRxiv - Cell Biology 2022Quote: ... 4°C (Type 45 Ti rotor, Beckman Coulter) for 30 min to collect supernatant ...
-
bioRxiv - Biochemistry 2020Quote: ... 4 °C (Beckman Coulter Optima LE-80K Ultracentrifuge). The clarified lysate was placed in a beaker on a stir plate at 4 °C and concentrated ammonium sulfate (5 mM HEPES pH 7.5 ...