Labshake search
Citations for Microchem :
1 - 50 of 226 citations for 8 bromo 4 methoxyquinoline since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2020Quote: ... a 4-μm-thick layer of SU-8 2005 (MicroChem) was spin coated ...
-
bioRxiv - Genomics 2021Quote: ... The SU-8 lithography is performed on a 4 inch silicon wafer using SU 8-2050 (Microchem) negative photoresist using UV aligner (EVG-620) ...
-
bioRxiv - Bioengineering 2023Quote: ... Mold for layer #4 is fabricated using SU-8 2025 (MicroChem, Newton, MA, USA) spin-coated at 4000rpm for 30s to create ∼20μm tall channels (Figure S2b) ...
-
bioRxiv - Bioengineering 2022Quote: ... SU-8 based (SU-8 50 & SU-8 100, MicroChem, USA) wafer masters were fabricated according to the manufacturer’s protocols (media module ...
-
bioRxiv - Cell Biology 2019Quote: ... Control molds were fabricated on 4” silicon wafers by spin coating SU-8 2025/3025 (MicroChem) at 500 rpm for 5 sec followed by 3000 rpm for 70 sec yielding a substrate height of around 15-18 μm ...
-
bioRxiv - Neuroscience 2020Quote: ... SU-8 photoresist (SU-8 2000.5, MicroChem) was used to construct the bottom insulating layer ...
-
bioRxiv - Genomics 2021Quote: ... SU-8 precursor (SU-8 2000.5, MicroChem) was spin-coated at 4000 rpm ...
-
bioRxiv - Bioengineering 2022Quote: ... A negative photoresist of SU-8 (SU-8 2025 and SU-8 2050, MicroChem) and the chrome photomasks (Range Photomasks ...
-
bioRxiv - Genomics 2019Quote: ... SU-8 2025 and SU-8 2010 (MicroChem) were used sequentially ...
-
bioRxiv - Bioengineering 2023Quote: ... SU- 8 5 and SU-8 50 (MicroChem) were subsequently spin-coated on the wafer at different heights (5 µm for microchannels and 100 µm for microwells ...
-
bioRxiv - Bioengineering 2023Quote: ... negative photoresist SU-8 (SU-8 2010; MicroChem) was spin-coated on the Si wafer at 3,000 rpm for 30 s ...
-
bioRxiv - Bioengineering 2023Quote: ... negative photoresist SU-8 (SU-8 2000.5; MicroChem) was spin-coated on the Si wafer at 3,000 rpm for 30 s ...
-
bioRxiv - Bioengineering 2023Quote: ... negative photoresist SU-8 (SU-8 2000.5; MicroChem) labeled with Lissamine rhodamine B ethylenediamine (RhBen ...
-
Cyborg islets: implanted flexible electronics reveal principles of human islet electrical maturationbioRxiv - Bioengineering 2024Quote: ... The SU-8 precursor (SU-8 2000.5, MicroChem) was spin-coated to achieve a thickness of either 800 or 400 nm ...
-
bioRxiv - Plant Biology 2019Quote: ... we fabricated SU-8 masters (SU-8 2050, Microchem) on silicon wafers using a Karl-Süss MJB4 mask aligner and a laser printed photomask (Selba ...
-
bioRxiv - Neuroscience 2021Quote: ... (11) Spin-coating SU-8 precursor (SU-8 2025, MicroChem) at 3000 rpm ...
-
bioRxiv - Neuroscience 2021Quote: ... (9) Spin-coating SU-8 precursor (SU-8 2025, MicroChem) at 4000 rpm ...
-
bioRxiv - Neuroscience 2021Quote: ... (3) Spin-coating SU-8 precursor (SU-8 2000.5, MicroChem) at 3000 rpm ...
-
bioRxiv - Bioengineering 2019Quote: ... Uncrosslinked SU-8 was removed with SU-8 developer (Microchem) and silicon wafers were treated by vapor phase deposition of trichloro (1H ...
-
bioRxiv - Bioengineering 2020Quote: ... A 0.5 μm thick SU-8 photoepoxy (SU-8 2000.5, Microchem) was then spin coated on the PET film ...
-
bioRxiv - Bioengineering 2023Quote: ... The SU-8 resist was developed in SU-8 developer (Microchem) for 3 min ...
-
bioRxiv - Bioengineering 2023Quote: ... The SU-8 resist was developed in SU-8 developer (Microchem) for 1.5 min ...
-
bioRxiv - Bioengineering 2023Quote: ... The SU-8 resist was developed in SU-8 developer (Microchem), rinsed with isopropanol ...
-
bioRxiv - Systems Biology 2019Quote: ... The master was subjected to post-exposure bake at 95°C for 4 min and developed in fresh SU-8 developer (Microchem) for 6 min ...
-
bioRxiv - Bioengineering 2020Quote: ... post-baked (65 °C and 95 °C for 1 min and 4 min, respectively) and developed in SU-8 developer (MicroChem). The SU-8 was hard-baked at 180 °C for 1 hour after development ...
-
bioRxiv - Synthetic Biology 2019Quote: Master moulds of 13μm height were produced on a 4 inch silicone wafer (University Wafer) using SU-8 3010 (Microchem corp.) according to the manufacturer’s data sheet and developed in PGMEA ...
-
bioRxiv - Bioengineering 2020Quote: ... the non-polymerized SU-8 is removed with SU-8 developer (Microchem) in a bath for 10 min and then the wafer is cured in an oven at 160 °C.
-
bioRxiv - Bioengineering 2023Quote: SU-8 2005 and SU-8 2010 photoresists were procured from Microchem Corporation (USA) ...
-
bioRxiv - Biophysics 2021Quote: ... SU 8-3050 (MicroChem) photoresist was spin coated onto the silicon wafer at a specific rotation speed to obtain the desired thickness ...
-
bioRxiv - Bioengineering 2020Quote: ... SU-8 2075 (Microchem) was spun coat onto the silicon wafer with a thickness of 120 μm ...
-
bioRxiv - Bioengineering 2019Quote: ... SU-8 2150 (Microchem) was spun to a thickness of ~120 μm on a silicon wafer (University Wafers ...
-
bioRxiv - Bioengineering 2020Quote: ... We fabricated master molds in SU-8 (SU-8 3050, Microchem, Newton, MA) on 3-inch Si wafers (Silicon Sense ...
-
bioRxiv - Biophysics 2023Quote: ... an insulating layer of 500 nm SU-8 (MicroChem Inc., SU-8 2000.5) was patterned by standard photolithography such that only the parallel bars of the microelectrodes were exposed for making contact with the solution ...
-
bioRxiv - Plant Biology 2019Quote: ... SU-8 3005 (Microchem USA) was fabricated on a 4-inch silicon wafer by a single-mask photolithography process ...
-
bioRxiv - Biophysics 2019Quote: SU-8 2010 (MicroChem Corp.) was used as a base resist to prepare films in a range between 25 nm to 8000 nm ...
-
bioRxiv - Bioengineering 2020Quote: ... SU-8 negative photoresist (MicroChem) was coated onto a 6” silicon wafer via spinning coating ...
-
bioRxiv - Biochemistry 2020Quote: ... SU-8 2035 photoresist (Microchem) was spin-coated onto the wafer at 1055 rpm for 30 s to reach a desired thickness of 100 μm (± 3 μm) ...
-
bioRxiv - Biophysics 2020Quote: ... using SU-8 photoresist (Microchem) on silicon masters (MicroChemicals) ...
-
bioRxiv - Bioengineering 2022Quote: ... SU-8 2050 photoresist (MicroChem) was spun onto a silicon mold to achieve a 100 μm thick layer ...
-
bioRxiv - Systems Biology 2023Quote: ... SU-8 3000 photoresist (MicroChem) was spun on a silicon wafer (University Wafers ...
-
bioRxiv - Neuroscience 2023Quote: ... SU-8 2002 (MicroChem, USA) was spin-coated to achieve a thickness of approximately 3.0 µm (10 s at 500 rpm ...
-
bioRxiv - Cancer Biology 2024Quote: ... SU-8 100 photoresist (Microchem) was spun on a 4 inch silicon wafer (University Wafers ...
-
bioRxiv - Bioengineering 2023Quote: ... It was further baked at 95°C for 8 min and developed by submerging in SU-8 developer (Microchem SU-8 developer, Fisher Scientific) for at least 15 min ...
-
bioRxiv - Bioengineering 2024Quote: ... It was further baked at 95°C for 8 min and developed by submerging in SU-8 developer (Microchem SU-8 developer, Fisher Scientific) for at least 15 min ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... The chip mould with a uniform height of 23.5μm was obtained by spin-coating a silicon wafer (4 inches; Siltronix, France) with a negative photoresist (SU-8 2035, MicroChem Corp., Newton, MA, USA) according to manufacturer’s instructions ...
-
bioRxiv - Bioengineering 2020Quote: ... the device was encapsulated by a 7 μm thick SU-8 photoepoxy (SU-8 2007, Microchem) via photolithography.
-
bioRxiv - Microbiology 2021Quote: Microfluidic devices for drop making were fabricated by patterning SU-8 photoresist (Microchem SU-8 50) on silicon wafers (University Wafer ...
-
bioRxiv - Genomics 2020Quote: ... The negative photoresist SU-8 (SU-8 2025) based mold was fabricated according to manufacturer’s (MicroChem) recommendations using a precleaned silicon wafer substrate ...
-
bioRxiv - Plant Biology 2019Quote: ... SU-8 100 (MicroChem, Westborough, USA) negative photoresist was stacked on a silicon wafer using a spin coater ...
-
bioRxiv - Neuroscience 2021Quote: ... developed using SU-8 developer (MicroChem) for 6 min ...